Maintenance strategy based on a multicriterion classification of equipments

In an industrial plant, the level of maintenance provided to individual equipment is directly related to the availability that is expected from it. Thus, it is hoped that the most critical equipments will not fail or, at least, that any failure will be rapidly detected and corrected in the minimum time possible. Since resources are limited, it is necessary to determine how they should be distributed, so that no important equipment remains neglected while more resources are concentrated on the most critical items. Therefore, it is necessary to classify equipment in an objective way according to its importance. The method of multicriterion classification of critical equipments (MCCE)², which is described in the present work, allows systematic and detailed quantification of the criticality of all equipment, that is to say, it provides an evaluation of the importance that its correct operation has for the plant. To provide this information, the consequences for a company of any failure in the equipment concerned are analysed. Finally, a real case example of an urban wastewater treatment plant is described, in which the MCCE method is applied.     

Model Driven Architecture

Bei der Model Driven Architecture (MDA) bilden Modelle die zentralen Elemente des Softwareentwicklungsprozesses. Ziel ist es, plattformspezifische Modelle möglichst automatisiert aus plattformunabhängigen Modellen abzuleiten. Dadurch soll der Aufwand der Softwareentwicklung verringert und die Adaptierung an neue Technologien erleichtert werden.*Vorschläge an Prof. Dr. Frank Puppe oder Dieter Steinbauer Alle „Aktuellen Schlagwörter“ seit 1988 finden Sie unter: www.ai-wuerzburg.de/as     

Quantitative determination of non-defect unstable structures in PVC through selective nucleophilic substitution with C6H5SNa

Summary The nucleophilic substitution with C₆H₅SNa, at -30°C, is compared for five PVC samples with various contents of isotactic triads. The conversion curves consist of a very fast stage followed by a steady one. All the samples are found to behave in the same way except for the content of the structures involved in the fast period. This content is estimated by extrapolating the straight lines of the steady stages to zero time. The obtained values are found to be a linear function of the content of isotactic triads. The results, together with some earlier ones, allow for the content of the labile non-defect structures in PVC to be determined.     

Modelling thermal degradation of composite materials

A one–dimensional, transient thermal degradation heat transfer model for the response of composite materials when exposed to fire is presented. The model can handle layers of different materials. Material properties are functions of temperature. The reaction can be specified using Arrhenius‐type parameters or by inputting a density–temperature relationship determined by any experimental technique such as thermogravimetric analysis. The model is validated against the experimental data presented in Boyer's 1984 dissertation. Overall, the model provides excellent agreement with the experimental data. It is shown that very little difference is found between results arrived at by Arrhenius kinetics and results obtained by specifying the easier to measure density–temperature relationship. From this it is concluded that this technique is a viable alternative to Arrhenius‐type models. Copyright © 2006 John Wiley & Sons, Ltd.     

Modified determination of 2-thiobarbituric acid value in fats and oils

Several methods for the determination of TBA-value were compared with a new direct modification (omitting the previous distillation), using 1-butanol as the sole solvent. The absorbance is measured at 530 nm after heating to 95 degrees C for 120 min, and cooling. The effect of variables was tested by the Youdens ruggedness test (reaction time, temperature, cooling, concentration of sample, thiobarbituric acid, water, heavy metals, antioxidants, chelating agents, bubbling with oxygen or nitrogen). The Lambert-Beers law is valid in the absorbance range between 0.05 and 0.8. The repeatability is better than that of the Dzikowskis procedure and comparable with those of more complicated distillation methods. The standard deviation is in a linear relation with the absorbance (range 0.1-1.0). The method was found satisfactory for evaluating lard, cooking fat, soybean, sunflower, and rapeseed oils in the stage of beginning rancidity.     

On maximum norm contractivity of second order damped single step methods

In this paper we consider A(θ)-stable finite difference methods for numerical solutions of dissipative partial differential equations of parabolic type. Combining two rational approximation methods with different orders of accuracy, where the lower order method is applied n ₀ times (n ₀ fixed) at each time step, we prove the existence of a second order method which is contractive for all time steps. Moreover, we shed light on the conditions on the lower order method which are sufficient (and sometimes necessary) to obtain the optimal order of accuracy. For the one-dimensional heat equation we construct a family of numerical methods which are contractive in the maximum norm for all values of the discretization parameters. We also present numerical examples to illustrate our results. Received: May 2002 / Accepted: January 2003     

Kinetics of chlorination of tantalum pentoxide in mixture with sucrose carbon by chlorine gas

The mechanism and kinetics of β-Ta₂O₅ chlorination, mixed with sucrose carbon, have been studied by a thermogravimetric technique. The investigated temperature range was 500 °C to 850 °C. The reactants and reaction residues were analyzed by scanning electronic microscopy (SEM), X-ray diffraction (XRD), and Brunauer-Emmett-Teller method for surface area (BET). The effect of various experimental parameters was studied, such as carbon percentage, temperature, chlorine partial pressure, and flow, use of the multiple sample method, and carbon previous oxidation. The carbon percentage and previous treatment have an effect on the system reactivity. The temperature has a marked effect on the reaction rate. In the 500 °C to 600 °C temperature interval, the apparent activation energy is 144 kJ/mol of oxide, while at higher temperatures, the activation energy decreases. With high chorine partial pressures, the order of reaction is near zero. The kinetic contractile plate model, X=kt, considering carbon oxidation as the controlling stage, is the one with the best fit to the experimental data. A probable mechanism for the carbochlorination of β-Ta₂O₅ is proposed: (1) activation of chlorine on the carbon surface, (2) chlorination of Ta₂O₅, (3) oxidation of carbon, and (4) recrystallization of β-Ta₂O₅.     

Glyconanoparticle-DNA interactions: an atomic force microscopy study.

Glyconanoparticles which present carbohydrate and amino groups motifs at their surface were produced. These particles were highly stable and soluble in aqueous solutions. The presence of the carbohydrate groups also allowed the inclusion of more strongly binding groups, without affecting solubility. The binding of a model DNA, plasmid by these nanoparticles was studied by atomic force microscopy, transmission electron microscopy, and gel electrophoresis. Significant differences between the nanoparticles based on their affinities for the DNA were found, with implications for their potential use as nonviral gene delivery agents.