基于感知器的快速彩色图像无损压缩算法

针对彩色图像像素和颜色分量之间存在的相关性，将神经网络中的感知器技术引入彩色图像的无损压缩算法中，提出了一种新的预测模型。应用感知器的自学习和自适应能力，对预测值进行自适应调整，使算法在运行过程中具有很小的预测残差并具有较小的动态范围。同时应用颜色空间变换来减小颜色分量间的相关性。相对于新的国际标准JPEG—LS，这种预测模型具有较低的计算复杂性。对比实验结果说明，这种算法的性能明显优于传统算法，在压缩比损失很小的前提下，其执行速度高于JPEG—LS。     

封闭插接母线施工工艺

从工艺原理、流程、操作要点、质量要求等不同侧面介绍了封闭插接母线的施工方法，提出了应注意的安全事项，通过效益分析表明，此法具有工期短、节省人力、工序先进、效益显著等优点。     

Structure evolution of conductive polymer composites revealed by solvent vapor induced time-dependent percolation

The authors of this paper synthesized a series of amphiphilic triblock copolymers of polystyrene-b-poly(ethylene glycol)-b-polystyrene (PS-PEG-PS) having different PEG/PS ratios with nearly identical molecular weights of the entire copolymers. The interfacial interactions in the composites consisting of carbon black and the copolymers can thus be tailored. When these conducting composites are exposed to certain solvent vapors, their electrical resistances greatly increase, showing the gas sensitivity. The present work indicated that this switching behavior is controlled by the structural relaxation of the composites because matrix swelling acts as the main mechanism. The response time has been correlated with absolute temperature by Arrhenius equation, and the estimated activation energy reflects mobility of the fillers involved in the solvent induced expansion of the surrounding polymer. Therefore, by using the gas sensibility of the conductive composites, the structure evolution of the composite materials in solid state and the effect of filler/matrix interfacial interaction on the relaxation property of the matrix polymer has been inspected. It was found that lower activation energy represents stronger interfacial interaction in case good solvent of the matrix was used for the test.     

电信号码编排的建议——使用电话名

介绍了电话名的概念 ,并主要针对电话名系统的实现、应用及前景做了相应的分析     

Improved domino logic for high speed design

Techniques are introduced to improve the speed of domino logic. With an inverted clock scheme, a serial transistor is removed and capacitances at the output node are reduced in the new structures. HSPICE simulation shows that over 20% performance enhancement is achieved.     

变频器的常见故障分析

本文阐述了变频器的常见故障，并针对常见故障提出了解决措施。     

高坝风险分析的事件树法

新世纪一批高坝将要在我国开工建设,这对我国的水电能源及国民经济的发展有着不可估量的作用,而高坝建设中,安全性是需要首先保证的。目前对高坝的风险分析方法有主观概率法、客观概率法等。从系统工程的角度出发,采用事件树方法对高坝的风险进行了探索研究,并给出了算例以说明该方法的有效性和实用性。     

Comparative study of the elimination of toluene vapours in twin biotrickling filters using two microorganisms Bacillus cereus S1 and S2

BACKGROUND: To investigate the microbial degradation performance of organic pollutants in the atmosphere using a biotrickling filter, two microorganism strains, Bacillus cereus S1 and Bacillus cereus S2, were selected, identified and inoculated into a twin biotrickling filter for comparison. RESULTS: Both strains showed good performance towards the degradation of model organic pollutants when gas flow rates ranged from 100 to 600 L h⁻¹. For S1, the total maximum removal efficiency (RE) of toluene was maintained nearly 100% not only at gas flow rates of 100 L h⁻¹ corresponding to empty bed residence time (EBRT) 199.44 s, but also at gas flow rates of 200 L h⁻¹ (EBRT = 99.72 s) and 300 L h⁻¹ (EBRT = 66.48 s). However, S2 had a much lower degradation capability; near 100% removal efficiency was obtained only at the gas flow rate of 100 L h⁻¹ although both bacteria belong to the same Bacillus cereus. With further increase in gas flow rate, the total REs for both S1 and S2 decreased slightly at first and then dropped sharply to 46% and 35%, respectively, at an EBRT of 33.24 s, corresponding to a gas flow rate of 600 L h⁻¹. Starvation for between 2 and 10 days resulted in the re‐acclimation times of both strains ranging between 1.0 and 15.5 h. CONCLUSION: Strain S1 would be a better choice for inoculation into a biotrickling filter than strain S2, because of its much higher toluene removal capacity and rapid recovery to full performance. Copyright © 2008 Society of Chemical Industry     

Novel blood-compatible waterborne polyurethane using chitosan as an extender

A series of novel block polymers of polyurethane (PU) and chitosan have been prepared in two steps. The first step is the preparation of PU prepolymer, obtained from polytetramethylene oxide glycol (PTMO, M_n = 1000), isophrone diisocyanate (IPDI), and 2,2′-dimethylol propionic acid (DMPA), followed by ionizing PU prepolymer with triethylamine (TEA). The second step involves PU chain-extended by water-soluble chitosan of low molecular weight (M_n = 5000) by self-emulsion polymerization method. The sizes of the latex particles, morphology, and copolymer architecture have been characterized by dynamic light scattering (DLS), general tensile test, infrared spectroscopy (IR), surface contact angle measurement, and transmission electron microscopy (TEM). Furthermore, it shows that the addition of chitosan remarkably increases anticoagulative property of PU elastomers confirmed by the recalcification time. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

首届文博会向创意产业迈进

创意产业为期5天的首届“中国北京国际文化创意产业博览会”12月10日至14日在北京国际展览中心举行，首届北京文博会包括展览展示，论坛峰会，推介交易，创意活动，文艺演出等五大系列的第十场活动，境外共有5个国际性组织和40多个国家和地区的400多位嘉宾应邀参会参展，[第一段]