Continuous finite element schemes for a phase field model in two-layer fluid Bénard–Marangoni convection computations

In this article, we study a phase field model for a two-layer fluid where the temperature dependence of both the density (buoyancy forces) and the surface tension (Marangoni effects) is considered. The phase field model consisting of a modified Navier–Stokes equation, a Cahn–Hilliard phase field equation and an energy transport equation is derived through an energetic variational procedure. An appropriate variational form and a continuous finite element method are adopted to maintain the underlying energy law to its greatest extent. A few examples for Bénard–Marangoni convection in an Acetonitrile and n-Hexane two-layer fluid system heated from above will be computed to justify our phase field model and further show the good performance of our methods. In addition, an interesting experiment will be performed to show the competition between the Marangoni effects and the buoyancy forces.     

4-乙基-1-苯基环己醇的催化氢解

在乙醇体系中,4 丙基 1 苯基环己醇在2MPa氢气压力下200℃反应8h,完全氢解且反式选择性高,得到71.7%的反式产物和22.3%的顺式产物。考察了温度等对氢解反应的影响,发现高温有利于反式产物的生成。     

Measuring individual corrective reaction time using the intermittent illumination model

The corrective reaction time (t_cr) is an essential motor property when modelling hand control movements. Many studies designed experiments to estimate t_cr, but reported only group means with inconsistent definitions. This study proposes an alternative methodology using Drury's (1994) intermittent illumination model. A total of 24 participants performed circular tracking movements under five levels of visual information delay using a modified monitor in a darkened room. Measured movement speeds and the manipulated delays were used with the model to estimate t_cr of individuals and test effects of gender and path width. The results showed excellent model fits and demonstrated individual differences of t_cr, which was 273 ms on average and ranged from 87 to 441 ms. The wide range of t_cr values was due to significant effects of gender and path width. Male participants required shorter t_cr compared to female participants, especially for narrow path widths.     

Multiobjective evolutionary algorithm for manufacturing scheduling problems: state-of-the-art survey

Scheduling is an important tool for a manufacturing system, where it can have a major impact on the productivity of a production process. In order to find an optimal solution to scheduling problems it gives rise to complex combinatorial optimization problems. Unfortunately, most of them fall into the class of NP-hard combinatorial problems. In this paper, we focus on the design of multiobjective evolutionary algorithms (MOEAs) to solve a variety of scheduling problems. Firstly, we introduce fitness assignment mechanism and performance measures for solving multiple objective optimization problems, and introduce evolutionary representations and hybrid evolutionary operations especially for the scheduling problems. Then we apply these EAs to the different types of scheduling problems, included job shop scheduling problem (JSP), flexible JSP, Automatic Guided Vehicle (AGV) dispatching in flexible manufacturing system (FMS), and integrated process planning and scheduling (IPPS). Through a variety of numerical experiments, we demonstrate the effectiveness of these Hybrid EAs (HEAs) in the widely applications of manufacturing scheduling problems. This paper also summarizes a classification of scheduling problems, and illustrates the design way of EAs for the different types of scheduling problems. It is useful to guide how to design an effective EA for the practical manufacturing scheduling problems. As known, these practical scheduling problems are very complex, and almost is a combination of different typical scheduling problems.     

Effects of Stearic Acid on the Injection Molding of Alumina

This research investigated the influence of stearic acid on the injection molding of alumina, by varying the concentration of stearic acid. The interaction between stearic acid and alumina was identified using transmission infrared spectroscopy, indicating stearic acid preferentially adsorbed onto the alumina powder surface. In addition to slightly modifying the intrinsic binder viscosity, stearic acid adsorbed onto the powder surface changed the flow behavior of the mixtures from dilatant flow to pseudoplastic flow at low temperatures. As a result, inhomogeneous distribution of binder in the injection-molded parts was minimized with increased stearic acid concentration. However, the possibility of forming bubbles in the mixtures arising from vaporization of stearic acid was enhanced. Additionally, the binder burnout temperature range was broadened with the increase of stearic acid concentration.     

计算机辅助试验研究系统

１９８１年我们研制了可在我校４４１Ｂ－Ⅲ和ＤＰＳ８／４９电子计算机上运行的多变量橡胶配方试验程序（ｔ－ｓ），为了微型计算机普遍使用的形势，根据在生产和科学研究中应用统计方法实际情况，我们改写、扩展，组成了计算机辅助试验研究（ＣＯＭＰＵＥＲＡＩＤＥＤ ＲＥＳＥＡＲＣＨ，简称ＣＡＲ）系统，其主要内容包含正交试验法和回归分析法等，具有实验设计、配方（配合）开发、实验拟合模型等功能，可作多因素试验的定性     

Selective oxidation of styrenes under oxygen catalyzed by cobalt chloride

The cobalt(II) chloride-catalyzed oxidative cleavage of -methylstyrene with oxygen in t-BuOH gives acetophenone and formaldehyde in good yield. The competing reactions between C=C cleavage and formation of polymeric products are strongly affected by the solvent, cobalt catalyst and concentration used, as well as the reaction temperature. A free radical mechanism involving a cyclic peroxide intermediate is proposed to give the cleavage products. Oxidation of various alkenes using CoCl₂/t-BuOH/O₂ system shows that only activated styrenes can be oxidized effectively. The reactivity of various styrenes and their selectivity towards giving cleavage products or polymers are strongly influenced by the electronic and steric properties of the substrate.     

Static and Cyclic Fatigue of Alumina at High Temperatures: II, Failure Analysis

Failure mechanisms of an alumina, tested at 1200°C under static and various cyclic loading conditions, were examined. Slow crack growth of a single crack is the dominant mechanism for the failure in specimens under cyclic loading with a short duration of maximum stress at all applied stress levels, as well as at high applied loads for static loading and cyclic loading with a longer hold time at maximum stress. At low stress levels, failure of static loading and cyclic loading with a longer hold time at maximum stress might occur by formation and/or growth of multiple macrocracks. More importantly, for all the given loading conditions. The viscous glassy phase behind the crack tip could have a bridging effect on the crack surfaces. A simplified model for calculating effective stress intensity factor at the crack tip under static and various cyclic loading demonstrated a trend consistent with the stress–life data.     

Local orders,lattice distortions,and electronic structure dominated mechanical properties of (ZrHfTaM1M2)C (M = Nb,Ti, V)

High-entropy carbides (HECs) are regarded as potential candidate structural materials with attractive mechanical properties due to their ultra-high hardness. It is essential to reveal the atomic and electronic basis for strengthening mechanism in order to develop the advanced HECs. In the present work, C (M = Nb, Ti, V) are selected as case studies. The effects of transition metals (M) on the lattice parameters, bulk modulus, enthalpy of formation, electron work function (EWF), and bonding morphology/strength of HECs are comprehensively studied by first-principles calculations. It is found that the lattice parameters, equilibrium volumes, and bulk modulus of HECs are improved with the increase of M atomic volumes. The atomic-size differences among various groups of elements not only result in the lattice mismatch/distortion but also contribute to the formation of weak spots. In the view of bonding charge density, the electron redistributions caused by the coupling effect of the lattice distortion and valance electron differences can be revealed obviously, which identify the different bonding strength. Moreover, in terms of EWF, the proposed power-law-scaled hardness of HECs is validated and matches well with those reported theoretical and experimental results, providing a strategy to design advanced HECs with excellent mechanical properties.     

纳米香精在棉织物上的应用研究

本文探讨了纳米玫瑰香精在棉织物上的加香整理工艺,并对加香棉织物的香气缓释性能作了初步评价.结果表明纳米香精在棉织物上的加香整理后效果较为理想,加香织物经50次洗涤后仍有大量的香精残留,香气质量无明显变化.