Hydrogen microscopy – Distribution of hydrogen in buckled niobium hydrogen thin films

Hydrogen absorption in thin metal films clamped to rigid substrates results in mechanical stress that changes the hydrogen's chemical potential by Δμ_H(σ) = −1.124σ kJ/mol_H for σ measured in [GPa]. In this paper we show that local stress relaxation by the detachment of niobium hydrogen thin films from the substrate affects the chemical potential on the local scale: using coincident proton–proton scattering at a proton microprobe, the hydrogen concentration is determined with μm resolution, revealing that hydrogen is not homogenously distributed in the film. The local hydrogen solubility of the film changes with its local stress state, mapping the buckled film fraction. In niobium hydrogen thin films loaded up to nominal concentrations in the two-phase coexistence region, the clamped film fraction remains in the solid solution phase, while the buckles represent the hydride phase. These results are compared to a simple model taking the stress impact on the chemical potential into account.     

Degradation of phthalate esters in an activated sludge wastewater treatment plant

Efficient removal of phthalate esters (PE) in wastewater treatment plants (WWTP) is becoming an increasing priority in many countries. In this study, we examined the fate of dimethyl phthalate (DMP), dibutyl phthalate (DBP), butylbenzyl phthalate (BBP), and di-(2-ethylhexyl) phthalate (DEHP) in a full scale activated sludge WWTP with biological removal of nitrogen and phosphorus. The mean concentrations of DMP, DBP, BBP, and DEHP at the WWTP inlet were 1.9, 20.5, 37.9, and 71.9 μg/L, respectively. Less than 0.1%, 42%, 35%, and 96% of DMP, DBP, BBP, and DEHP was associated with suspended solids, respectively. The overall microbial degradation of DMP, DBP, BBP, and DEHP in the WWTP was estimated to be 93%, 91%, 90%, and 81%, respectively. Seven to nine percent of the incoming PE were recovered in the WWTP effluent. Factors affecting microbial degradation of DEHP in activated sludge were studied using [U-¹⁴C-ring] DEHP as tracer. First order rate coefficients for aerobic DEHP degradation were 1.0×10⁻², 1.4×10⁻², and 1.3×10⁻³ at 20, 32, and 43 °C, respectively. Aerobic degradation rates decreased dramatically under aerobic thermophilic conditions (<0.1×10⁻² h⁻¹ at 60 °C). The degradation rate under anoxic denitrifying conditions was 0.3×10⁻² h⁻¹, whereas the rate under alternating conditions (aerobic-anoxic) was 0.8×10⁻² h⁻¹. Aerobic DEHP degradation in activated sludge samples was stimulated 5-9 times by addition of a phthalate degrading bacterium. The phthalate degrading bacterium was isolated from activated sludge, and maintained a capacity for DEHP degradation while growing on vegetable oil. Collectively, the results of the study identified several controls of microbial PE degradation in activated sludge. These controls may be considered to enhance PE degradation in activated sludge WWTP with biological removal of nitrogen and phosphorus.     

A comparison of PCB bioaccumulation factors between an arctic and a temperate marine food web

To test how environmental conditions in the Arctic and the resulting ecological adaptations affect accumulation of persistent organic pollutants (POPs) in the marine food web, bioaccumulation of four polychlorinated biphenyls (PCBs) in an arctic (Barents Sea 77 °N-82 °N) and a temperate marine (Baltic Sea 54 °N-62 °N) food web were compared. Three different trophic levels were studied (zooplankton, fish, and seal), representing the span from first-level consumer to top predator. Previously published high-quality data on PCB water concentrations in the two areas were used for calculation of bioaccumulation factors (BAF). BAF was calculated as the ratio of the PCB concentration in the organism ([PCB]_org; pg/kg lipid) to the dissolved water concentration (C_w; pg/L). The BAF_Arctic:BAF_Temperate ratios were above 1 for all four PCB congeners in zooplankton (6.4-13.8) and planktivorous fish (2.9-5.0)), whereas the ratios were below 1 in seal. The mean ratio between arctic and temperate BAFs for all trophic levels and congeners (BAF_Arcti:BAF_Temperate) was 4.8. When the data were corrected for the seawater temperature difference between the two ecosystems, the ratio was 2.0. We conclude that bioaccumulation differences caused by ecological or physiological adaptations of organisms between the two ecosystems were well within a water concentration variability of 50%. Further, our data support the hypothesis that lower seawater temperature lead to a thermodynamically favoured passive partitioning to organic matrices and thus elevated ambient BAFs in the Arctic compared to the Baltic Sea. This would imply that bioaccumulation in the Arctic may be described in the same way as bioaccumulation in temperate regions, e.g. by the use of mechanistic models parameterised for the Arctic.     

Cost-benefit analysis for disruption prevention in low-volume assembly

Manufacturing companies face rising pressure due to increased competition. Traditionally, companies have merely concentrated on offering impeccable, cost-efficient products. Today, however, flexibility and on-time delivery are additional requirements to satisfy the customers. At the same time, disruptions in production, especially in low-volume assembly, still frequently occur, leading to economic losses and delayed customer deliveries. The approach proposed in this paper strives for improving the disruption situation in low-volume assemblies. A detailed disruption management methodology has been developed, aiming at realizing an efficient reduction of disruptions, while at the same time considering the specific characteristics of low-volume assembly. The methodology is supported by a catalog of pre-emptive measures. These measures are known to reduce the disruptions’ occurrence or to diminish their consequences. In general, the approach pursues the basic idea to implement particularly those measures, which have the best cost-benefit-ratio. Based on the analysis of the cost-benefit-ratio of each measure, the developed methodology aims at improving the disruption situation in assembly and thus providing a high on-time delivery rate. The usability of the methodology for the low-volume assembly context has been confirmed by assembly experts on the basis of an application of the methodology in an exemplary case study.     

The advantage of using in-situ methods for studying hydrogen mass transport: Neutron radiography vs. carrier gas hot extraction

Neutron radiography (NR) is compared with the commonly used carrier gas hot extraction (CGHE) technique. We performed isothermal hydrogen effusion experiments at 623 K to study the mass transport kinetics. The investigated material was technical iron. The quantification of the hydrogen mass flow is done for NR by using concentration standards. The temporal hydrogen concentration evolution in the sample coincides well for both methods, i.e. NR and CGHE, and is in good agreement with literature. The advantages of the NR method are the non-destructive nature of measuring and the in-situ determination of hydrogen concentrations with high spatial and temporal resolution. Remaining hydrogen inside the sample can be identified directly by the NR method.     

Novel polyamide nanocomposites based on silicate nanotubes of the mineral halloysite

In this study, the silicate nanotubes of the mineral halloysite will be used as reinforcement in polyamide-6 (PA 6). The nanocomposites based on PA-6 and as-received halloysite were prepared by melt extrusion and an adjacent injection moulding process. Mechanical and thermomechanical properties have been investigated by tensile testing and dynamic mechanical analysis. The results show an increased strength and stiffness as well as an enhanced elongation at break at low halloysite content. To evaluate the potential of halloysite as a new candidate in the class of nanofillers, the properties of the halloysite nanocomposites has been compared to those of conventional nanocomposites based on organically modified montmorillonite. From this comparison it can be seen, that both types of nanocomposites show enhanced tensile properties as well as an increased storage modulus, but the increase in tensile strength is more pronounced in the organoclay nanocomposites, whereas the raise of the storage modulus is more prominent in the halloysite nanocomposites.