Off-line multiresponse optimization of electrochemical surface grinding by a multi-objective programming method

The objective of this study is to optimize electrochemical grinding (ECG) process responses simultaneously by an off-line multiresponse optimization methodology. The responses considered as objectives are side and bottom overcuts, surface finish, spindle load, total metal removal rate, and wheel wear. Materials of 304 Stainless Steel are ground by the ECG process. The process variables optimized for the above objectives include electrolyte type, wheel material, grit size, grit concentration, d.c. voltage, electrolyte flow rate, wheel speed, feed rate, and ripple effect. A simple weighting method transforms the multi-objective problem into a single-objective programming format and then, by parametric variation of the weights, the set of non-dominated optimum solutions are obtained. It is shown in this paper that the multi-objective optimization methodology can be applied for an ECG operation, and that the optimal operating conditions for any given set of weights can be obtained depending upon the objectives.     

伊犁盆地生成发展概述

本文对伊犁盆地的生成和发展做了初步探讨,认为它是在前震旦纪结晶基底之上经历了较长时间的抬升之后形成和发展起来的双层结构盆地,即石炭纪体内裂谷盆地,石炭纪后山间陆相盆地。     

High-temperature hydrothermal systems in West Yunnan Province, China

There are more than 660 thermal springs in West Yunnan Province, 30 of which are high-temperature hydrothermal systems with reservoir temperatures above 150°C.All thermal springs in West Yunnan are under the control of the tectonics, most of them being distributed at anticlinoria of metamorphic rocks and granites. This paper discusses the relationship between thermal areas and tectonics, the correlation between thermal springs in West Yunnan and North Thailand, and the geothermal prospects in West Yunnan.     

Simulation of programmable logic controller

The development and test of a PLC control program takes time, increases equipment down-time, and might damage hardware due to program errors. All of these problems can be eliminated if there is a computer simulation system for testing control programs off line. This paper presented a new method, called Direct Sequential Method, for simulating PLCs. This method resolves a ladder logic sequentially by applying a series of logic deductions. This simulation system has been implemented in C and tested successfully.     

Surgical navigation by autostereoscopic image overlay of integral videography

This paper describes an autostereoscopic image overlay technique that is integrated into a surgical navigation system to superimpose a real three-dimensional (3-D) image onto the patient via a half-silvered mirror. The images are created by employing a modified version of integral videography (IV), which is an animated extension of integral photography. IV records and reproduces 3-D images using a microconvex lens array and flat display; it can display geometrically accurate 3-D autostereoscopic images and reproduce motion parallax without the need for special devices. The use of semitransparent display devices makes it appear that the 3-D image is inside the patient's body. This is the first report of applying an autostereoscopic display with an image overlay system in surgical navigation. Experiments demonstrated that the fast IV rendering technique and patient-image registration method produce an average registration accuracy of 1.13 mm. Experiments using a target in phantom agar showed that the system can guide a needle toward a target with an average error of 2.6 mm. Improvement in the quality of the IV display will make this system practical and its use will increase surgical accuracy and reduce invasiveness.     

A Study of the Compatibility Between Asphalt and SBS

In this article, the compatibilities between different components of a base asphalt and styrene butadiene styrene (SBS) have been analyzed from microscopic structures. Specifically, the asphalt was separated into three components: saturates, aromatics, and resins, by Solvent Recycled Absorption Chromatography Separation Technology (SRACST). The compatibilities between these different components and the polymer were compared with the help of Fluorescence Microscope (FM) with which the existing state of the polymer SBS in these different components could be examined obviously. The modified effects indicated that aromatics could cause SBS swollen and, resins dissolved SBS better than saturates, though both the two components could partially dissolve SBS and the two mixtures presented two immiscible phase systems. In order to further investigate the compatibility between aromatics and SBS, from macroscopic properties, an additive rich in aromatics was added to the SBS/asphalt mixture, and the result was satisfactory.     

机载雷达空时二维信号处理自适应权值训练的距离分段递推算法

本文针对机载预警雷达的杂波环境，分析了杂波数据的非平稳性，由此提出在距离上分段实现空时二维自适应处理（STAP）的方法，并通过分析杂波于空间的距离来确定分段的方法。在同时考虑实时性和处理器性能的前提下，给出了一种自适应权值计算的递推算法。理论分析和计算机仿真结果均表明，本文提出的分段递推算法是有效的。     

小水电CDM项目在西部的开发现状及其优势

介绍国内小水电CDM项目开发现状，分析我国西部丰富的小水电资源分布及开发小水电CDM项目存在的潜力及优势，并提出在开发小水电CDM项目过程中应注意的有关问题。图2幅，表1个。