Measurements of single chain form factors by small-angle neutron scattering from polystyrene blends containing high concentrations of labelled molecules

A series of small angle neutron scattering measurements on blends of normal polystyrene (PSH) and labelled (deuterated) polystyrene (PSD) have been made with concentrations of PSD from 5 to 50 mol %. It is shown that the single chain form factor of the polymer in bulk can be obtained from a single concentration measurement for any concentration of labelled molecules, providing the molecular weights of the parent and labelled molecules are the same and the molecular weight distributions are narrow.     

Delay-dependent state estimation for delayed neural networks

In this letter, the delay-dependent state estimation problem for neural networks with time-varying delay is investigated. A delay-dependent criterion is established to estimate the neuron states through available output measurements such that the dynamics of the estimation error is globally exponentially stable. The proposed method is based on the free-weighting matrix approach and is applicable to the case that the derivative of a time-varying delay takes any value. An algorithm is presented to compute the state estimator. Finally, a numerical example is given to demonstrate the effectiveness of this approach and the improvement over existing ones.     

Well-posedness of dual-phase-lagging heat conduction equation: higher dimensions

The dual-phase-lagging heat conduction equation is shown to be of one unique solution for a finite region of dimension n (n?2) under Dirichlet, Neumann or Robin boundary conditions. The solution is also found to be stable with respect to initial conditions. The work is of fundamental importance in applying the dual-phase-lagging model for the microscale heat conduction of high-rate heat flux.     

南化大化肥硝铵库屋面施工防渗漏措施

南化大化肥硝铵库工程 ,于 2 0 0 0年 2月 15日开工 ,2 0 0 0年 10月 10日竣工 ,混凝土杯形基础 ,主体结构为单层、单跨、装配式的排架结构 ,30ｍ预应力折线形屋架 ,大型屋面板 ,氯化聚乙烯防水卷材 ,建筑面积为 162 0ｍ2 。氯化聚乙烯防水卷材是防水新型材料 ,由于防水性能好 ,施工方便 ,近几年得到了广泛的应用 ,在实际操作中往往由于施工人员对操作规程不甚了解 ,或虽有所了解 ,但没有认真对待 ,造成这样那样的质量问题 ,硝铵库作为一个储物库房 ,对防渗漏的要求高 ,那么施工中怎样避免出现渗漏现象 ,确保工程质量呢 ?1　做好施工准备检…     

End-User Computing in a CASE Environment

Computer-aided software engineering (CASE) tools are currently being used by IS professionals rather than by users. No matter how effective these tools may be, however, they will not be able to assist in the reduction of application backlogs without supporting user-driven applications. This article examines characteristics of a CASE environment from the various perspectives of decision support, identifies the advantages and limitations of end-user computing in this environment, and suggests how IS managers can realize the potentials of CASE for user applications.     

WDM传输系统中泵浦配置对光纤拉曼放大器增益特性的影响

通过理论分析和模拟运算,研究了光纤拉曼放大器泵浦优化的一般规律。     

A Built-in Self-Test Scheme with Diagnostics Support for Embedded SRAM

In this paper we propose a novel built-in self-test (BIST) design for embedded SRAM cores. Our contribution includes a compact and efficient BIST circuit with diagnosis support and an automatic diagnostic system. The diagnosis module of our BIST circuit can capture the error syndromes as well as fault locations for the purposes of repair and fault/failure analysis. In addition, our design provides programmability for custom March algorithms with lower hardware cost. The combination of the on-line programming mode and diagnostic system dramatically reduces the effort in design debugging and yield enhancement. We have designed and implemented test chips with our BIST design. Experimental results show that the area overhead of the proposed BIST design is only 2.4% for a 128 KB SRAM, and 0.65% for a 2 MB one.     

面向WCDMA建立网络管理信息模型

分析了WCDMA移动通信网网管系统管理框架，在此基础上提出采用公共对象请求代理体系结构（CORBA）建立网管系统信息模型的优势，给出WCDMA网管系统的信息模型，同时介绍了对象管理组（OMG）接口描述语言（IDL）。     

中国电子商务思考

网络经济持续走低，但电子商务的发展大方向是不会改变的。在中国，目前的主要问题是宽带网的重复建设、认证机构建设缺乏有效监管、电子商务立法滞后、物流配送系统不完善、标准化问题成为电子商务发展的障碍等，当前应做的主要是：政策的宏观引导、示范推广、加强对宽带网和认证机构建设的监管等。     

Interfacial segregation of Ti in the brazing of diamond grits onto a steel substrate using a Cu-Sn-Ti brazing alloy

Diamond grits were brazed onto a steel substrate using a prealloyed Cu-10Sn-15Ti (wt pct) brazing alloy at 925 °C and 1050 °C. Due to the relatively high concentration of Ti in the brazing alloy, the braze matrix exhibited a composite structure, composed of β-(Cu,Sn), a Cu-based solid solution, and various intermetallic compounds with different morphologies. The reaction of Ti with diamond yielded a continuous TiC layer on the surfaces of the diamond grits. On top of the TiC growth front, an intermetallic compound, composed of Sn and Ti, nucleated and grew into a randomly interwoven fine lacey structure. An interfacial structure developed as the interwoven fine lacey phase was semicoherently bonded to the TiC layer, with the Cu-based braze matrix filling its interstices. The thickness of such a composite layer was increased linearly with the square root of isothermal holding time at 925 °C, complying with the law of a diffusion-controlled process. However, at 1050 °C, the segregation behavior of Ti and Sn to the interfaces between the TiC layer and the braze matrix diminished, due to the increased solubility of Ti in the Cu-based liquid phase. The enhanced dissolution of Ti in the Cu-based liquid phase at 1050 °C also caused the precipitation of rod-like CuTi with an average diameter of about 0.2 μm during cooling. SnTi₃ was the predominant intermetallic compound and existed in three different forms in the braze matrix. It existed as interconnected grains of large size which either floated to the surface of the braze matrix or grew into faceted grains. It also exhibited a nail-like structure with a mean diameter of about 1 μm for the rod section and a lamellar structure arising from a eutectic reaction during cooling.