Functional polysiloxanes

Summary Carboxyester- and carboxyamido-terminated polydimethylsiloxanes were obtained through the reaction of cyclic anhydrides (succinic, maleic and phthalic anhydride) with hydroxypropyl- and aminoalkyl-terminated polydimethylsiloxanes, respectively. The reactivity of the starting compounds and the influence of the reaction conditions on the characteristics of the final products are discussed.Part 1: Eur. Polym. J., in press     

Microwave dewaxing applied to the investment casting process

Autoclave processing is commonly used nowadays for dewaxing in the investment casting process. However, since the use of microwave is steadily growing in industrial processes and the wax interacts with the electromagnetic energy of the microwaves, the present work studies the possibility of carrying out dewaxing via microwave. The wax (mineral wax, vegetable resin, low molecular-weight polymer and anti-oxidant) used in this work was prepared by melting in an oven equipped with a mineral oil bath. The chemical and structural stability of the wax were monitored throughout 12 simulated dewaxing cycles, via various analyses, namely, volumetric expansion, hardness, Fourier transform infrared spectroscopy, ultraviolet–visible spectrophotometry, differential scanning calorimetry and viscosity. The results showed that microwave dewaxing is viable, significantly decreasing the incorporation of dirt and water, which is inevitable in the autoclave dewaxing process.     

Electrochemical study of AISI 304 stainless steel during the exposure at the disinfectant solutions with fungal suspensions

The effect of fungal suspensions on the disinfectant solution (Actisept with sodium dichloroisocyanurate as active substance, which releases 140 ppm active chlorine) and the corrosion behavior of type AISI 304 stainless steel (SS) were evaluated through linear polarization. The work presents a study of biocide Actisept solution as reference solution and the mixed solutions: reference biocide Actisept solution with three fungal suspensions (10 vol%), Aspergillus niger, Candida mycoderma, and Saccharomyces cerevisiae. The fungal suspension has an important influence on the synergistic effect of the SS corrosion in the following order: Saccharomyces cerevisiae > Candida mycoderma > Aspergillus niger. The E_corr values from the mixed solutions decreased with immersion time of the samples. In the case of Aspergillus niger, the corrosion rate was lower than that of any other type of fungal suspension tested, because the arrangement in solutions, the size and composition of Aspergillus niger spores were more favorable to protect the spores of the chemical and the electrical stressing. The results showed that there is a synergistic effect between the active substances from the disinfectant, fungal suspensions and applied potential, thus this effect can be taken into consideration for the hygienic and safety food industry.     

An algebraic algorithm for the resolution of singularities of foliations

We propose an algorithm that uses Gröbner bases to compute the resolution of the singularities of a foliation of the complex projective plane.     

Electronic structural details of donor-vacancy complexes in Si-doped Ge and Ge-doped Si

We present a detailed picture of the electronic structure of donor-vacancy complexes in Ge-doped silicon and Si-doped germanium clusters to mimic Si-rich and Ge-rich SiGe alloys, respectively. Jahn-Teller effects and electrical levels were investigated in both Si-rich and Ge-rich end compositions. It is shown that while Ge atoms act as efficient traps for mobile E-centers in Si-rich alloys, Si atoms in Ge-rich material do not have this ability. A detailed linear combination of atomic orbitals model is proposed for VP-Ge and VP-Si complexes in Si_1−xGe_x and Ge_1−xSi_x, where the orbital filling order is driven by the larger electron affinity of Si atoms when compared to Ge.     

Combustion synthesis of copper catalysts for selective CO oxidation

Copper catalysts supported on ceria, zirconia and niobia were prepared by combustion method with urea, containing a CuO loading of 6 wt.%, and tested on selective oxidation of CO. The characterization of the samples by X-ray diffraction (XRD) presented the formation of solid solution on CuO–CeO₂ catalyst and a change in crystalline structure of the support with copper insertion on ZrO₂ and Nb₂O₅ catalysts. The analysis of temperature-programmed reduction (TPR) revealed different interaction degrees of copper with the supports, with reduction peaks between 222 and 390 °C. The temperature-programmed desorption of CO (TPD-CO) profiles showed formation of CO₂ and H₂ only for the ceria and zirconia catalysts. In relation to the catalytic tests, the CuO–CeO₂ catalyst presented the best performance, with CO conversion of 95% at 150 °C up to 45 h on stream, and CO₂ selectivity of 55%.     

Moisture sorption isotherms and thermodynamic properties of apple Fuji and garlic

The moisture equilibrium isotherms of garlic and apple were determined at 50, 60 and 70 °C using the gravimetric static method. The experimental data were analysed using GAB, BET, Henderson–Thompson and Oswin equations. The isosteric heat and the differential entropy of desorption were determined by applying Clausius–Clapeyron and Gibbs–Helmholtz equations, respectively. The GAB equation showed the best fitting to the experimental data (R² > 99% and E% < 10%). The monolayer moisture content values for apple were higher than those for garlic at the studied temperatures; the values varied from 0.050 to 0.056 and from 0.107 to 0.168 for garlic and apple, respectively. The isosteric heat and the differential entropy of desorption were estimated in function of the moisture content. The values of these thermodynamic properties were higher for apple (in range 48–100 kJ mol^?1 and 14–150 J mol^?1 K^?1) than for garlic (in range 43–68 kJ mol^?1 and 0–66 J mol^?1 K^?1). The water surface area values decreased with increasing temperature. The Kelvin and the Halsey equations were used to calculate the pore size distribution.     

The infrared thermography control of the laser welding of amorphous polymers

In laser welding technique, a real-time control of temperature distribution inside the irradiated materials is essential when attempting to optimize the process. For all laser welding methods that operate by the transmission principle, the difficulty of recording the developed temperature at the interface derives from the fact that materials to be welded are in contact throughout the entire process. In the present study, in order to overcome this issue, a contact-free method such the infrared thermography is used for surface temperature measurement. Corroborating this data with a numerical simulation of the temperature field evolution inside the components, an assessment of optimal process parameters is possible. The experimental investigations are made on amorphous polymers, in a typical configuration for through-transmission laser welding. The fine agreement obtained between the experimentally and calculated data, validate the infrared thermography as a non-destructive method for real-time monitoring of the welding process.     

Moisture barrier and physical properties of acetylated derivatives with increasing acetylation degree

Four acetostearin products with increasing acetylation degree were synthesized by chemical interesterification followed by fractionation/blending stages. Their physical properties and functional barrier properties were studied and compared to the properties of technical tristearin. Increasing acetylation degree (AD) modified the triacylglycerols crystal habits and probably led to an increase in acyl chain fluidity, which induced, at macroscopic levels, a decrease in solid fat content (SFC), in melting point, in surface and bulk material hydrophobicity, and an increased moisture effective diffusivity. Water vapor permeability (WVP) coefficients of the materials were partially influenced by the AD factor, but also by the development of macroscopic cracks in lipids presenting high SFC. Acetylated stearin up to 47% (acetyl mol/mol of esterified chain) presented the lowest WVP at 20 °C resulting from an adequate balance between hydrophobicity and mechanical properties of the material.