偏振模色散统计特性的研究

利用动态方程研究了偏振模色散矢量的统计特性 ,分别用统计系综和频率系综两种方法进行数值模拟。数值结果表明 ,统计系综和频率系综两种方法的结果一致。在大归一化距离条件下 ,均方根时延的平方随归一化距离线性变化 ;偏振模色散矢量的各个分量服从高斯分布 ,差分群时延服从麦克斯韦分布 ;偏振模色散矢量弥散于整个邦加球     

微重力落塔电磁悬吊、释放技术研究

论述了微重力落塔电磁悬吊、释放、提升机构的关键技术,电磁释放过程的特性分析以及微重力落塔实际试验的情况。分析说明:悬吊、释放性能的好坏决定了试验落舱的微重力水平,也是微重力落塔试验能否成功的关键技术。     

回归分析法简化钻爆设计

以某工程钻爆参数为例,阐述了在地下工程掘进施工中,应用回归分析法建立钻爆参数的相关模型,并利用此模型帮助建立某断面钻爆方案.     

倾斜水塔的爆破拆除

针对某部倾斜水塔的定向爆破拆除,从防止水塔倾倒偏移和筒体触地冲击地面对周围环境造成影响等不利情况,确定爆破方案和采取相应的防护措施.     

基于图像灰度统计分布的高炉温度场动态定标算法

通过高炉红外图像建立料面温度场是判断高炉煤气流分布形态的一种有效方法,温度定标是建立温度场的基本问题之一.在高炉复杂、恶劣的环境下,本文以高炉十字测温为基础,通过热电偶温度数据和图像对应区域的灰度分布统计,动态地建立温度定标关系.算法具有较好的自适应性,实际生产运行表明,温度定标关系较好地适应了高炉炉况的不确定性,准确地反映了高炉温度场的变化情况.     

The effect of pack-aluminisation on the microstructure of MCrAlY and the performance of thermal barrier coatings

Plasma spraying and pack-aluminising processes were combined and applied to the nickel-base superalloy Mar-M247 to improve its cyclic oxidation resistance. The performance tests of duplex ZrO₂-8 wt.%Y₂O₃/MCrAlY thermal barrier coatings (TBCs) were conducted at 1050 °C, 1075 °C, 1100 °C, 1150 °C and 1200 °C. The results of the experiments in this study showed that TBC specimens with the aluminised MCrAlY bond coat exhibited higher cyclic lives (except for the Ni-22Cr-10Al-1Y bond coat), at all the temperatures tested, than specimens on which the bond coat was not aluminised. The microstructures of the Co-29Cr-6Al-1Y, Co-32Ni-21Cr-8Al-0.5Y and Ni-22Cr-10Al-1Y bond coats with or without aluminising treatment were examined in detail using a scanning electron microscope equipped with an electron probe microanalyzer.     

An efficient approach for calculating the dispersions of photonic-crystal fibers: design of the nearly zero ultra-flattened dispersion

A novel and efficient approach is proposed to calculate the dispersions of the guided modes of the photonic-crystal fibers (PCFs). Based on the vector boundary-element method (VBEM), the surface integral equations for the first and second derivatives of the propagation constants with respect to the wavelength are explicitly derived. Compared with the three-point finite-difference approach, which needs to solve and search three effective indexes near the interested wavelength, this approach can determine the dispersions of the PCFs by only solving one effective index at this wavelength based on the derived formulations. This novel approach saves over 60% computing time without losing the accuracy. Based on this approach, a novel four-ring PCF is designed by optimizing only three geometrical parameters to achieve the nearly zero ultra-flattened dispersion property. Compared with previously presented dispersion-flattened PCFs, the design procedure for the four-ring structure could be more efficient and easier because relatively lesser parameters need to be optimized.     

A Study of AlN Films Prepared by Arc Ion Plating

Hexagonal AlN films have been obtained by arc ion plating at different negative biases ,X-ray diffraction and scanning electron microscopy results show that AlN films with smooth surfaces and (002) preferred orientation are obtained at low biases ,whereas those with coarse surfaces and (100) preferred orientation are obtained at high biases,The formation mechanism of AlN is analyzed and the experiment results are discussed,The effect of bias on adhesion strength has also been examined.     

PetaStar: a petabit photonic packet switch

This paper presents a new petabit photonic packet switch architecture, called PetaStar. Using a new multidimensional photonic multiplexing scheme that includes space, time, wavelength, and subcarrier domains, PetaStar is based on a three-stage Clos-network photonic switch fabric to provide scalable large-dimension switch interconnections with nanosecond reconfiguration speed. Packet buffering is implemented electronically at the input and output port controllers, allowing the central photonic switch fabric to transport high-speed optical signals without electrical-to-optical conversion. Optical time-division multiplexing technology further scales port speed beyond electronic speed up to 160 Gb/s to minimize the fiber connections. To solve output port contention and internal blocking in the three-stage Clos-network switch, we present a new matching scheme, called c-MAC, a concurrent matching algorithm for Clos-network switches. It is highly distributed such that the input-output matching and routing-path finding are concurrently performed by scheduling modules. One feasible architecture for the c-MAC scheme, where a crosspoint switch is used to provide the interconnections between the arbitration modules, is also proposed. With the c-MAC scheme, and an internal speedup of 1.5, PetaStar with a switch size of 6400 /spl times/ 6400 and total capacity of 1.024 petabit/s can be achieved at a throughput close to 100% under various traffic conditions.     

高坝风险分析的事件树法

新世纪一批高坝将要在我国开工建设,这对我国的水电能源及国民经济的发展有着不可估量的作用,而高坝建设中,安全性是需要首先保证的。目前对高坝的风险分析方法有主观概率法、客观概率法等。从系统工程的角度出发,采用事件树方法对高坝的风险进行了探索研究,并给出了算例以说明该方法的有效性和实用性。