基于高海拔地区的大气中子单粒子效应实时测量试验研究

开展65 nm高速大容量静态随机存取存储器（SRAM）大气中子单粒子效应特性及试验评价技术研究,基于4 300 m高海拔地区大面积器件阵列实时测量试验,突破效应甄别、智能远程测控等关键技术,在153 d的试验时间内共观测到错误43次,其中器件内单粒子翻转39次,多单元翻转（MCU）在单粒子翻转中占比23%,最大的MCU为9位。对高能中子、热中子和封装α粒子的贡献比例进行了分析,并基于多地中子通量数据,推演得到北京地面和10 km高空应用时的单位翻转（SBU）和MCU失效率（FIT）。发现地面处软错误的主要诱因为封装α粒子,随着海拔的增高,大气中子对软错误的贡献比例明显增大;MCU全部由高能中子引起,北京10 km高空处的MCU FIT值明显增大,其占比由地面的8%增大至26%。结合器件版图布局,对MCU产生机理进行了深入分析。最后,提出一种目标导向的存储器软错误加固策略优化方法。     

Lower bounds on lengths of checking sequences

Lower bounds on the lengths of checking sequences constructed for testing from Finite State Machine-based specifications are established. These bounds consider the case where a distinguishing sequence is used in forming state recognition and transition verification subsequences and identify the effects of overlapping among such subsequences. Empirical results show that the existing methods for construction of checking sequences provide checking sequences with lengths that are within acceptable distance to these lower bounds.     

低功耗矢量水声信号采集处理系统设计与实现

为进一步降低矢量水听器信号采集处理系统对水下滑翔机平台的续航影响,设计了一种以 ARM和 DSP 为核心控制 器的低功耗信号采集处理系统。利用ARM 控制器实现系统的多种工作模式,以达到不同状态下的最佳功耗控制。此外,在 控制软件中加入必要的优先级设计和流水线设计,以提高系统硬件控制效率,最后利用功率测试仪对系统不同工作模式进行 测试。结果表明,低功耗模式下平均功耗约为1.27 W, 实时处理模式下平均功耗约为4.29 W。 在长时间连续工作情况下,可 大幅度降低实时处理模式的工作时间占比,功耗控制效果显著,有效证明了该方案的有效性和优越性。     

光纤的总剂量效应分析研究

对光纤的总剂量效应进行了研究.介绍了光纤结构及传输特性,分析了光纤的总剂量效应.讨论了60Co-γ射线辐照条件下的试验结果.分析表明,在空间辐射环境中,光纤的传输性能在长波段受影响较小.对光纤在空间的应用有参考意义.     

Characterization of residual stresses from cold expansion using spatial statistics

Residual stress fields from cold expansion have been widely used to extend the fatigue life of aircraft structures. However, the spatial statistical character of these residual stress fields has not been established and has not been incorporated in current analysis methods. The objective of this study was to establish a spatial statistical method to quantify the residual stress field around a cold expanded hole. A framework called the Spatial Analysis of Residual Stress (SpARS) was developed utilizing spatial correlation, response surface modelling techniques and statistical resampling methods to characterize the residual stress field. Our results showed that tolerance bounds on residual stress can be quantified using this method. We also demonstrated the SpARS method using recently published round robin case studies. The newly developed model will be useful for aircraft structural fatigue crack growth analyses to incorporate residual stress fields for extending inspection intervals for fatigue and fracture critical structures.     

Development of single drive electrode electrical resistance tomography system

A new electrical resistance tomography system has been designed using the single drive electrode method. The bidirectional pulse current is adopted in this system as the exciting current. The model of this new method has been set up in ANSYS and validated by simulation and actual measured data. Based on this model, the influence of medium resistivity and connected resistance as well as the influence of medium distribution on the measured data is studied. The experimental results and the reconstructed images are presented at last to testify to the reliability of the new system and the feasibility of the new method.     

抽出式风机在治理工作面上隅角瓦斯的应用

针对漳村煤矿综采工作面上隅角瓦斯浓度高的情况,用抽出式风机处理上隅角瓦斯,较好地解决了上隅角瓦斯频繁超限事故,实现了矿井的安全生产。     

显像管玻壳退火炉热平衡测试及评估

通过对4台玻壳退火炉的热平衡测试、计算及分析,得到了玻壳退火炉热平衡收支数据,计算出玻璃成品的单位质量产品耗热量、单位质量产品燃气耗量等主要技术经济指标。提出了进一步提高热效率的技术措施。