Electrochemical reduction of oxygen on thin-film Pt electrodes in acid solutions

The electrochemical reduction of oxygen on thin-film platinum electrodes in 0.1 M HClO₄ and 0.05 M H₂SO₄ solutions has been investigated using the rotating disk electrode (RDE) method. Thin films of Pt (0.25-20 nm thick) were prepared by vacuum evaporation onto glassy carbon substrate. The surface morphology of Pt films was examined by transmission electron microscopy (TEM). The specific activity of O₂ reduction was higher in HClO₄ and decreased with decreasing film thickness. In H₂SO₄, the specific activity was lower and appeared to be independent of the Pt loading. The values of Tafel slopes close to −120 mV dec⁻¹ in high current density range and −60 mV dec⁻¹ in low current density range were obtained for all electrodes in both solutions, indicating that the mechanism of O₂ reduction is the same for thin-film electrodes as for bulk Pt. The number of electrons transferred per O₂ molecule was close to four for all thin Pt films studied.     

Tunable microwave devices using low-sintering-temperature screen-printed barium strontium titanate (BST) thick films

A tunable microwave phase shifter composed of a low-sintering-temperature, screen-printable barium strontium titanate (BST) film and silver metallization was fabricated on an alumina substrate and co-fired at 900 °C for 3 h. The dielectric properties of the films were characterized in a frequency range of 0.8–8 GHz using scattering parameter measurements and a quasi-static coplanar waveguide transmission line model. The temperature dependency of the films was measured through capacitance measurements in a frequency range of 0.5–2.5 GHz. The figure of merit (phase shift/dB of insertion loss) of the phase shifter was found to be 14.6 at 3 GHz with an applied bias field strength of 2.5 V/μm. The performance of the phase shifter is briefly discussed and compared with other phase shifters fabricated by direct screen-printing of BST films.     

Membrane evaluation for the treatment of acidic clear filtrate

The total effluent load of a paper mill can be significantly decreased by recycling of purified clear filtrate (CF) back to paper-making process. The CF treated with membranes can be reused, for instance, as wire section shower water and in the dilution of chemicals. The main requirements for a membrane in CF treatment are high filtration capacity, high retention of turbidity and low fouling tendency. Previous studies have shown that the regenerated cellulose (RC) ultrafiltration (UF) membrane C30F (current trade name UC030T) is especially suitable for the treatment of paper mill process waters. Every paper-making process is, however, different. Thus, filtration experiments are required in order to find the most optimal membrane for the treatment of a certain process water. In this study the best membrane for the treatment of acidic clear filtrate (ACF) was searched. The performance of the C30F membrane was compared with five UF and three microfiltration (MF) membranes. The results revealed that in addition to the C30F membrane, also some other membranes produced high filtration capacity with ACF (approximately 200 L/(m²h bar)). All the tested membranes also retained over 90% of turbidity. The extremely hydrophilic C30F membrane had, however, lower fouling tendency compared to the other tested membranes. Therefore, it was concluded that the C30F membranes were the best possible membrane for the ACF treatment.     

Chemoenzymatic Asymmetric Synthesis of Pyridine-Based α-Fluorinated Secondary Alcohols

Fluoro-substituted and heteroaromatic compounds are valuable intermediates for a variety of applications in pharma- and agrochemistry and synthetic chemistry. This study investigates the chemoenzymatic preparation of chiral alcohols bearing a heteroaromatic ring with an increasing degree of fluorination in α-position. Starting from readily available picoline derivatives prochiral α-halogenated acyl moieties were introduced with excellent selectivity and 64–95 % yield. The formed carbonyl group was subsequently reduced to the corresponding alcohols using the alcohol dehydrogenase from Lactobacillus kefir, yielding an enantiomeric excess of 95–>99 % and up to 98 % yield.     

Partial electrode method for loss and physical parameter determination of piezoceramics: Simplification,error investigation and applicability

The IEEE standard to determine physical parameters of piezoceramics has been utilized for decades by many researchers, yet it omits presence of important loss factors and possesses serious deficits that restrict accurate parameter determination. To resolve these issues, the partial electrode (PE) method was previously proposed, though the focus has been merely made on development of the method itself. In this study, we provide method simplification and more detailed analysis. The omission of unnecessary samples greatly boosts experiment and analysis process. To prove that the PE method is reliable, possible causes of errors were investigated; it is shown that they were either negligibly small or can be resolved with proper calibration. Furthermore, Applicability of PE method to various types of piezoceramic materials and compatibility with impedance analyzers are shown. Finally, PE method is proved to be reliable and can be alternative to IEEE Standard on Piezoelectricity.     

Strength retention of drawn self-reinforced polyglycolide rods and fixation properties of the distal femoral osteotomies with these rods. An experimental study on rats

Drawn self-reinforced polyglycolide (SR-PGA) rods, Ø 2 mm and 26 mm long, were implanted in the dorsal subcutaneus tissue of 16 rats. Osteotomies of the distal femur were fixed with SR-PGA rods (2 mm by 15 mm) in another 38 rats. The follow-up times varied from one week to one year. After sacrifice, three-point bending and shear tests were performed for subcutaneously placed rods. Radiological, histological, histomorphometrical, microradiographic, and oxytetracycline-fluorescence studies of osteotomized and intact control femora were also performed. At three weeks the flexural strength of the rods was 50% of the initial value, and the flexural modulus was 46% of the initial value. Five osteotomy specimens had to be excluded due to dislocation or non-union. One of the 33 evaluated osteotomy specimens showed signs of postoperative infection. Thirty-two osteotomies healed uneventfully. No gross signs of inflammatory or foreign-body reaction were observed. The amount of osteoid surface and active osteoid formation surface reached their highest value in the histomorphometrical analysis at 24 weeks. The present investigation demonstrated that the mechanical strength and fixation properties of the drawn SR-PGA rods are suitable for fixation of cancellous bone osteotomies in rats. The present article is the first report on the successful application of drawn SR-PGA rods for fixation of cancellous bone osteotomies.     

Interpersonal violations,speeding violations and their relation to accident involvement in Finland

The aim of the present study was to replicate the distinction between errors, lapses and violations, and to identify aggressive violations from normal or highway code violations. Furthermore, the relationship of these behaviours with road traffic accidents was examined. A total number of 1126 Finnish drivers completed a questionnaire containing the Driver Behaviour Questionnaire (DBQ) with extended violations scale, and questions regarding background information, such as age, gender and mileage. Also, questions about previous accidents and fines were asked. Factor analysis showed that a four-factor structure seemed more appropriate than the earlier established three-factor structure. The four factors were errors, lapses, speeding violations and interpersonal violations. The two types of violations result from different motives, and seem to be associated with different kinds of affect. Both interpersonal and speeding violations were reported most by young males, which was consistent with earlier findings. Logistic regression analyses indicated that errors predicted active accident involvement after partialling out the effects of demographic variables, whereas interpersonal violations were positively related to involvement in passive accidents. This was presumably due to different reporting tendencies of respondents. Speeding tickets were predicted by speeding and interpersonal violations and lapses and penalties for speeding by both kinds of violations and errors. Penalties for speeding, parking and other offences were predicted by interpersonal violations. The implications of these results are discussed.     

On the realization of periodic functions

In this article, canonical and spectrally minimal infinite-dimensional state space realizations for periodic functions are considered. It is shown that the periodic functions having ℓ₁ Fourier coefficients are precisely those realizable by a Riesz spectral system (RSS) in which the system operator generates a periodic strongly continuous semigroup and the observation operator is bounded. This realization can easily be converted to a canonical and spectrally minimal form. It is shown how the use of RSS and Cesáro sums of Fourier series allows the construction of a state space realization for a given periodic function merely integrable over its period. Simple finite-dimensional approximations with error bounds are derived for the RSS realization. Regular well-posed linear systems (WPLS) are used to construct a Fuhrmann-type realization for a given periodic function integrable over its period. It is shown that the RSS realizations and WPLS realizations are precisely equally good at coping with the possible ill behavior of a given bounded periodic function integrable over its period, but the WPLS realization is not always spectrally minimal or canonical.