NUMERICAL SIMULATION STUDY ON DEFORMATION UNIFORMITY OF EQUAL CROSS SECTION LATERAL EXTRUSION

Equal cross section lateral extrusion (ECSLE) is an effective method realizing pure shear deformation.The influence of friction factor on the deformation uniformity of ECSLE was investigated with rigid plastic finite element method.The result shows that the non-uniform deformation in extrusion is caused mainly by the friction between workpiece and die.The higher the friction factor is.the more uneven plastic deformation resulted in extruded workpiece.The relation curve of deformation uniformity vs. friction factor was drawn based on the analysis result. The curve can be used as a basis of ECSLE process design.     

THE STRUCTURE CONTROL OF ALUMINUM FOAMS PRODUCED BY POWDER COMPACTED FOAMING PROCESS

A new technique, powder compact foaming process for the production of aluminum foams has been studied in this article. According to this method, the aluminum powder is mixed with a powder foaming agent (Till2). Subsequent to mixing, the powder blend is hot compacted to obtain a dense semi-finished product. Upon heating to temperatures within the range of the melting point, the foaming agent decomposes to evolve gas and the semi-finished product expands into a porous cellular aluminum. Foaming process is the key in this method. Based on experiments, the foaming characteristics were mainly analyzed and discussed. Experiments show that the aluminum-foam with closed pores and a uniform cell structure of high porosity can be obtained using this method by adjusting the foaming parameters: the content of foaming agent and foaming temperature.     

The Adaptive Finite Element Remeshing in Large Deformation of Metal Forming

The adaptive remeshing technique for quadrilateral elements consists of modules the trigger of remeshing, the new mesh generation, adaptive refinement and interpolation of field variables. The new adaptive mesh generation is the key problem. First, a coarse mesh is created by using “loop algorithm“. Subsequent local mesh adaptive refinement is performed based on effective strain. Finally, a typical example of upsetting is given to test efficient of techniques, from which it is verified that the remeshing algorithm developed here exhibits good performance and has high accuracy.     

CALCULATION OF TRANSFORMATION VOLUME FRACTION TO HQ590 HOT ROLLED STRIP STEEL DURING CONTINUOUS COOLING

On the basis of phase transformation kinetics, the transformation of γ→α,P,B have been investigated through considering the effect of deformation. The calculation methods of volume fraction have also been given. Comparing with common method, the simulated results are in more agreement with experiment results.     

面心纯铝单向拉伸的晶体塑性学有限元模拟

基于率相关晶体塑性本构模型,实现了晶体塑性学有限元模拟过程。直接将电子背散射衍射(EBSD)获取的晶粒初始取向输入晶体塑性有限元模型,分别预测了单向拉伸面心1050纯铝过程中的力学响应与织构演化。应力应变响应数值模拟结果与实验结果有较好的一致性,同时也存在一定的偏差。两种多晶模型(Taylor模型和有限单元模型)分别模拟了单向拉伸真应变0.25和0.37时的织构演化。随着真应变的增加,两种丝织构(〈111〉织构和〈100〉织构)变得更加锋锐,模拟结果与EBSD实验测得的织构演化结果有较好的一致性。     

NICKEL-BASED ALLOYS IN GE AIRCRAFT TURBINES：PAST,PRESENT ＆ FUTURE

1. Introduction Freedom to travel anywhere in the world, both quickly and inexpensively, defines our modern era. Despite year-to-year variation, the long term demand for travel by airplane continues to grow. Three ma- jor systems comprise the modern airplane: the aircraft structure that encompasses the fuselage, wings, and landing gear; the avionics that enable flight through crowded skies in nearly all weather conditions; and the propulsion system that powers the aircraft. Improvements in mat…     

STUDY ON THE TENSILE FATIGUE DAMAGE OF QUASI—ISOTROPIC COMPOSITE LAMINATES

Quasi-isotropic. laminates have isotropic elastic properties in all in-plane directions. Therefore, this kind of laminate is widely used for structural elements. The simplest stacking sequence of quasi-isotropic laminates is [0/-60/60]s. When the direction of applied axial load to [0/-60/60]s laminate is inclined at a 30-degree angle, we have the other quasi-isotropic laminate [30/-30/90]s under axial load. The failure mechanisms of these two laminates are, however, entirely different from each other because these two laminates have different distribution of the interlaminar stresses. It was confirmed by tensile fatigue tests that the [0/-60/60]s laminate does not show any visible fatigue damage, but the [30/-30/90]s laminate develops edge-delamination during cyclic loading. The analytical results were in good agreement with the experimental results.     

EXPERIMENTAL TESTING OF DRAW—BEAD RESTRAINING FORCE IN SHEET METAL FORMING

Due to complexities of draw-bead restraining force calculated according to theory and depending on sheet metal forming properties experiment testing system, a simplified method to calculate draw-bead restraining force is put forward by experimental method in cup-shaped drawing process. The experimental results were compared with numerical results and proved agreement. It shows the method is effective.     

NANO-MULTILAYERS WITH HIGH PERPENDICULAR ANISOTROPY FOR MAGNETIC RECORDING

(FePt/Ag)n nano-multilayers were deposited on MgO (100) single crystal with laser ablation and then subjected to annealing. FePt L1o grains with (001) texture and thus a large perpendicular magnetic anisotropy constant Ku of the order of 106 J/m3 were formed. A thick Ag layer is found to be favorable for decreasing the dispersion of the easy axis for magnetization. The measurement of time decay of magnetization gave rise to a small activation volume of the order of 10-25m3, showing the promising of being the recording medium for future high density perpendicular recording.     

EFFECT OF RESIDUAL STRESS ON THE MARTENSITIC TRANSFORMATION OF SPUTTER-DEPOSITED SMA THIN FILMS

TiNi thin films were sputter-deposited on circular single-cry stal silicon substrates un-der various sputtering parameters. The crystal structure and residual stress of the as-deposited films were determined by X-ray diffraction and substrate-curvature method. The phenomenon of stress-suppressed martensitic transformation was observed. R is considered that the residual stresses in SMA thin films based on circular substrates act as balanced biaxial tensile stresses. The status of equilibrant delays the align-ment of self-accommodated variants and the volume shrinkage during the martensitic transformation.