Design of efficient, broadband single-element (20-80 MHz) ultrasonic transducers for medical imaging applications

This paper discusses the design, fabrication, and testing of sensitive broadband lithium niobate (LiNbO/sub 3/) single-element ultrasonic transducers in the 20-80 MHz frequency range. Transducers of varying dimensions were built for an f# range of 2.0-3.1. The desired focal depths were achieved by either casting an acoustic lens on the transducer face or press-focusing the piezoelectric into a spherical curvature. For designs that required electrical impedance matching, a low impedance transmission line coaxial cable was used. All transducers were tested in a pulse-echo arrangement, whereby the center frequency, bandwidth, insertion loss, and focal depth were measured. Several transducers were fabricated with center frequencies in the 20-80 MHz range with the measured -6 dB bandwidths and two-way insertion loss values ranging from 57 to 74% and 9.6 to 21.3 dB, respectively. Both transducer focusing techniques proved successful in producing highly sensitive, high-frequency, single-element, ultrasonic-imaging transducers. In vivo and in vitro ultrasonic backscatter microscope (UBM) images of human eyes were obtained with the 50 MHz transducers. The high sensitivity of these devices could possibly allow for an increase in depth of penetration, higher image signal-to-noise ratio (SNR), and improved image contrast at high frequencies when compared to previously reported results.     

Electronic and photonic properties of doped carbon nanotubes

The idea of doping carbon nanotubes is attractive since it provides various possibilities for controlling the physical properties of carbon nanotubes. In this review, we have summarized recent progress on the experimental and theoretical studies of carbon nanotubes doped with nonmetals, alkali metals, transition metals, and clusters. The doping effects on the electronic, magnetic, transport, and optical properties of carbon nanotubes are reviewed. The related applications of carbon nanotubes in nanoelectronics, battery, field emission, spintronics, nonlinear optics, and chemical sensors are discussed.     

Structural analysis of triacylglycerols and edible oils by near-infrared Fourier transform Raman spectroscopy

Fourier transform Raman spectroscopy was employed for structural analysis of triacylglycerols and edible oils. Raman spectra sensitively reflected structural changes in oils. Even slight structural fluctuation between triacylglycerols and free fatty acids led to obvious differences in Raman bands as shown by C-O-C stretching from 800 to 1000 cm(-1) and the band at 1742 cm(-1). Structural difference in geometric isomers was easily distinguished as proved by C = C stretching at 1655 cm(-1) (cis) shifting to 1668 cm(-1) (trans) and by =C-H in-plane bending at 1266 cm(-1) in cis disappearing in the trans isomer. Raman intensity at 1266, 1302, and 1655 cm(-1) changed concomitantly with the change of double-bond content in oils. It showed that FT-Raman was capable of precisly reflecting the content of double bonds in oils. A linear correlation with high consistency between the Raman intensity ratio (v1655/v1444) and the iodine value was obtained for commercial oils. Based on the results, FT-Raman spectroscopy proved itself a simple and rapid technique for oil analysis since each measurement could be directly completed in 3 min without any sample modifications.     

V2O5 nanofibre sheet actuators

Vanadium oxides, such as V2O5, are promising for lithium-ion batteries, catalysis, electrochromic devices and sensors. Vanadium oxides were proposed more than a decade ago for another redox-dependent application: the direct conversion of electrical energy to mechanical energy in actuators (artificial muscles). Although related conducting polymer and carbon nanotube actuators have been demonstrated, electromechanical actuators based on vanadium oxides have not be realized. V2O5 nanofibres and nanotubes provide the potential advantages of low-cost synthesis by sol-gel routes and high charging capacity and long cycle life. Here, we demonstrate electromechanical actuation for obtained high modulus V2O5 sheets comprising entangled V2O5 nanofibres. The high surface area of these V2O5 sheets facilitates electrochemical charge injection and intercalation that causes the electromechanical actuation. We show that the V2O5 sheets provide high Young's modulus, high actuator-generated stress, and high actuator stroke at low applied voltage.     

A unified description of current-voltage characteristics in organic and hybrid photovoltaics under low light intensity

We develop a simple model that can explain the current-voltage ( J- V) curves of excitonic photovoltaic solar cells, spanning polymer:polymer, polymer:fullerene, and polymer:nanocrystal devices. We show that by subtracting out the dark current, we can explain apparent intensity-dependent characteristics and thus identify geminate recombination as the dominant loss mechanism and establish its electric field dependence. We present an analytic fit to the J- V curves of all measured devices based on a single fitted parameter, the electric field required to split 50% of geminate charge pairs, which we term the critical field. Devices of different material combinations and morphologies can all be described by this method and yield critical fields varying between >1 x 10(8) V/m for blends of poly(9,9'-dioctylfluorene- co-bis- N, N'-(4-butylphenyl)-bis- N, N'-phenyl-1,4-phenylenediamine) (PFB) and poly(9,9'-dioctylfluorene- co-benzothiadiazole) (F8BT) and 8 x 10 (5) V/m for slow-grown blends of poly(3-hexylthiophene-2,5-diyl) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM). A comparison with material properties reveals that the primary route to improved photovoltaic materials is enhanced charge delocalization.     

The smooth (tractor) operator: insights of knowledge engineering

The design of and training for complex systems requires in-depth understanding of task demands imposed on users. In this project, we used the knowledge engineering approach (Bowles et al., 2004) to assess the task of mowing in a citrus grove. Knowledge engineering is divided into four phases: (1) Establish goals. We defined specific goals based on the stakeholders involved. The main goal was to identify operator demands to support improvement of the system. (2) Create a working model of the system. We reviewed product literature, analyzed the system, and conducted expert interviews. (3) Extract knowledge. We interviewed tractor operators to understand their knowledge base. (4) Structure knowledge. We analyzed and organized operator knowledge to inform project goals. We categorized the information and developed diagrams to display the knowledge effectively. This project illustrates the benefits of knowledge engineering as a qualitative research method to inform technology design and training.     

Sensitivity for pressure difference on the ischial tuberosity

Although research on sitting and sitting postures has been done for decades, the field of the subjective feeling of comfort or discomfort during sitting is still an unexplored field. On the basis of those studies some manufacturers claim enhanced subjective comfort because of pressure-relieving qualities of the seat cushions. The question is: does a relatively small pressure reduction enhance comfort? Before that question can be answered, the sensitivity for pressure differences applied to the skin must first be determined. The aim of this study was therefore, to determine the sensitivity of the ischial tuberosity for pressure difference in a healthy population. For this study five males and five females aged between 19 and 30 years with no exercise-induced muscle ache were selected. The (Deltaa) was determined for which stimulus (a + Deltaa) was judged as exceeding stimulus (a) in 50% of the trials. This value was called (Deltaa0.5) and was determined with an adapted simple up - down method with forced choice. Two different values for (a) were used: (a) = 13.3 kPa and (a) = 26.5 kPa and the pressure was applied with two different contact surface with diameters of 10 mm and 20 mm. For (a) = 26.5 kPa and d = 10 mm a Deltaa0.5 = 2.7 kPa was found. For (a) = 26.5 kPa and d = 20 mm a Deltaa0.5 = 3.5 kPa was found. For (a) = 13.3 kPa and d = 20 mm a Deltaa0.5 = 1.9 kPa was found.     

Selectively grouping neurons in recurrent networks of lateral inhibition

Winner-take-all networks have been proposed to underlie many of the brain's fundamental computational abilities. However, not much is known about how to extend the grouping of potential winners in these networks beyond single neuron or uniformly arranged groups of neurons. We show that competition between arbitrary groups of neurons can be realized by organizing lateral inhibition in linear threshold networks. Given a collection of potentially overlapping groups (with the exception of some degenerate cases), the lateral inhibition results in network dynamics such that any permitted set of neurons that can be coactivated by some input at a stable steady state is contained in one of the groups. The information about the input is preserved in this operation. The activity level of a neuron in a permitted set corresponds to its stimulus strength, amplified by some constant. Sets of neurons that are not part of a group cannot be coactivated by any input at a stable steady state. We analyze the storage capacity of such a network for random groups--the number of random groups the network can store as permitted sets without creating too many spurious ones. In this framework, we calculate the optimal sparsity of the groups (maximizing group entropy). We find that for dense inputs, the optimal sparsity is unphysiologically small. However, when the inputs and the groups are equally sparse, we derive a more plausible optimal sparsity. We believe our results are the first steps toward attractor theories in hybrid analog-digital networks.     

Determination of the threshold of gravity for inducing kinetosis in fish: A drop-tower experiment

It has been repeatedly shown earlier that some fish of a given batch reveal motion sickness (a kinetosis) at the transition from 1 g to microgravity. In the course of parabolic aircraft flight experiments, it has been demonstrated that kinetosis susceptibility is correlated with asymmetric inner ear otoliths (i.e., differently weighed statoliths on the right and the left side of the head) or with genetically predispositioned malformed cells within the sensory epithelia of the inner ear. Hitherto, the threshold of gravity perception for inducing kinetotic behaviour as well as the relative importance of asymmetric otoliths versus malformed epithelia for kinetosis susceptibility has yet not been determined. The following experiment using the ZARM drop-tower facility in Bremen, Germany, is proposed to be carried out in order to answer the aforementioned questions. Larval cichlid fish (Oreochromis mossambicus) will be kept in a camcorder-equipped centrifuge during the microgravity phases of the drops and thus receive various gravity environments ranging from 0.1 to 0.9 g. Videographed controls will be housed outside of the centrifuge receiving 0 g. Based on the videorecordings, animals will be grouped into kinetotically and normally swimming samples. Subsequently, otoliths will be dissected and their size and asymmetry will be measured. Further investigations will focus on the numerical quantification of inner ear supporting and sensory cells as well as on the quantification of inner ear carbonic anhydrase reactivity. A correlation between (1) the results to be obtained concerning the g-loads inducing kinetosis and (2) the corresponding otolith asymmetry/morphology of sensory epithelia/carbonic anhydrase reactivity will further contribute to the understanding of the origin of kinetosis susceptibility. Besides an outline of the proposed principal experiments, the present study reports on a first series of drop-tower tests which were undertaken to elucidate the feasibility of the proposal (especially concerning the question, if some 4.7 s of microgravity are sufficient to induce kinetotic behaviour in larval fish).