Hydrothermal Synthesis of Magnesium Aluminate Platelets

Magnesium aluminate (MgAl₂O₄) platelets were first synthesized by hydrothermal treatment of γ-AlO(OH) in a magnesium nitrate aqueous solution at 400°C. The platelets are 100–200 nm in width and 25 nm in thickness. The influence of temperature, the anions of the magnesium salt, the amount of magnesium salt, and precursor pH on the formation of such structure was investigated. The experimental results indicated that the anions of the magnesium salt and precursor pH could have a significant influence on the growth of MgAl₂O₄. MgAl₂O₄ formation followed the in situ transformation mechanism, which was the reason why the MgAl₂O₄ crystallites had a platelet morphology.     

Facile synthesis of ordered nanocrystalline alumina thin films with tunable mesopore structures

Mesoporous alumina layers have attracted attention for their potential use in ultrafiltration of salts, as a heterogeneous catalyst support, an adsorbent in environmental cleanup, and in petroleum refinement. The ability to control the fast hydrolysis rate of the inorganic precursors using simple and inexpensive routes is important for that potential to be realized. Herein, we introduce a novel and facile route to synthesize mesoporous alumina thin films from the combination of inexpensive and commercially available copolymer with aluminum chloride or nitrate (salts) in an EtOH–surfactant–NH₃ · H₂O–salts (EsNs) system through the evaporation-induced self-assembly (EISA) method. Mesoporous alumina layers obtained utilizing the EsNs system have ordered and tunable pore structures. The ability to easily control the mesophases of the alumina layers within a short time provides distinct advantages over previously reported synthesis procedures. Most importantly, we demonstrate that the binding of surfactant and NH₃ · H₂O for the formation of hydrogen bond between them in the EsNs system controls the fast hydrolysis rate of the inorganic species. This allows for the synthesis of nanocrystalline alumina layers via the aluminum oxo-clusters’ assembly with the surfactant. Such simple route may be applied in the synthesis of other non-silica mesostructured oxides.     

环境放射化学研究中几个问题的讨论

本文从辐射环境保护和公众辐射防护的角度，讨论了放射性核素在环境中的迁移行为，放射性核素与环境介质的相互作用和放射性核素在环境中的形态等涉及到环境放射化学研究方向的问题，并讨论了它们之间相互依存的关系。     

西门子S7-200可编程控制器在气化油点火技术中的应用

以西门子S7—200PLC为核心。利用火检探头。温度、压力等传感器，结合STEP 7 MicmwIN V3．1以及ProTool Pro CS工业组态软件完成了对点火过程的自动控制。实现了西门子S7—200PLC在大型发电厂410吨级蒸汽锅炉“气化油直接点燃煤粉技术”中的应用。提高了锅炉点火系统运行的自动化水平。     

堆底熔穿事故的场外后果及其对策

在压水堆核电站应急计划和应急响应中，堆底熔穿事故占有重要位置。本文用法国核电厂事故源项Ｓ３（对应于堆底熔穿事故）计算了在典型气象条件下的场外放射学的后果，根据一般防护决策原则和我国颁布的干预水平，提出了保护公众的应急防护措施的建议。     

碳/环氧复合材料的冲击拉伸

该文研究了T300碳纤维单向增强的环氧复合材料,在应变率从10~(-3)/s到10~3/s范围内的冲击拉伸行为.通过对实验数据进行拟合,得出该范围内材料对应变率具有弱的敏感性,表现在破坏强度及破坏应变随应变率增加不显著变化,平均模量几乎不受应变率的影响.分析了试件的几何尺寸效应,讨论了应力波作用对破坏形态的影响以及实验中观察到的拔出现象.从应变率在10~2～10~3/s附近材料行为某些非确定性,指出在更宽范围内了解其性能的必要性.     

智能化红外焊缝检测仪的实时信号自相关分析

详细介绍了在改进红外焊缝检测仪的过程中实时信号的一种抗干扰方法－－自相关方法。重点离自相关方法的数学模型，软件框图及设计思想，并给出了实验结果。     

电位滴定法研究~(99)Tc-HMDP和~(99)Tc-HEDP中Tc的氧化态

~(99)Tc-HMDP和~(99)Tc-HEDP溶液是在相应的螫合剂存在下,用过量SnCl_2还原~(99)TcO_4-制得。用标准I_2液对SnCl_2进行了剩余量电位滴定,确定了在pH～3的介质中,~(99)Tc-HMDP和~(99)Tc-HE-DP中~(99)Tc的氧化态均为+4。全部实验在N_2气流中进行。~(99)Tc-HMDP和~(99)Tc-HEDP的紫外光谱表明:在用I_2滴定的过程中,~(99)Tc只处于一种氧化态+4;将它们放置在空气中,一小时后仍较稳定。