Electroplated hard magnetic material and its application in microelectromechanical systems

We describe the preparation of CoNiMnP-based permanent-magnet material using several sulfate and chloride solutions. We studied eight samples, and all the samples show vertical magnetic anisotropy. Sample8, which was electroplated from a low-concentration chloride solution and under external magnetic field, demonstrates the best magnetic properties with coercivity 2632 Oe, remanence 0.20 T, and maximum magnetic energy 10.185 kJ/m/sup 3/. An array structure can avoid the stress between the electroplated layer and the seed layer. The electroplated Co/sub 0.8/Ni/sub 0.1174/Mn/sub 0.0062/P/sub 0.0762/ permanent magnet has potential for bidirectional actuators in micro-electromechanical systems.     

National and international university departmental Web site interlinking

Although many link patterns have been identified at the university level, departmental interlinking has been relatively ignored. Universities are multidisciplinary by nature and various disciplines may employ the Web differently, thus patterns identified at the university level may hide subject differences. Departments are typically subject-oriented, and departmental interlinking may therefore illustrate interesting disciplinary linking patterns, perhaps relating to informal scholarly communication. The aim of this paper is to identify whether and how link patterns differ along country and disciplinary lines between similar disciplines and similar countries. Physics, Chemistry and Biology departments in Australia, Canada and the UK have been chosen. In order to get a holistic picture of departments' Web use profiles and link patterns, five different perspectives are identified and compared for each set of departments. Differences in link patterns are identified along both national and disciplinary lines, and are found to reflect offline phenomena. Along national lines, a likely explanation for the difference is that countries with better research performances make more general use of the Web; and, with respect to international peer interlinking, countries that share more scholarly communication tend to interlink more with each other. Along disciplinary lines, it seems that departments from disciplines which are more willing to distribute their research outputs tend to make more general use of the Web, and also interlink more with their national and international peers.     

实验室网间网的设计与实现

介绍了广域网环境在实验室设计和实现的一个实例.     

采用SPC3协议芯片设计PROFIBUS-DP智能从站

从开发角度详细介绍使用 SPC3 实现 PROFIBUS-DP 从站的软硬设计方法,分析 PROFIBUS-DP 从站的状态机,以及如何编写 G S D 文件。     

高职学生网络成瘾行为及调适

通过对高职学生中存在的网络成瘾问题的长期关注，对其危害深有感触，着重分析其内外诱因，讨论了用团体辅导的方式等进行调适的办法。     

压水堆一回路模拟腐蚀氧化物的溶解去污试验

本文介绍了对两种压水反应堆一回路模拟腐蚀氧化物（铁镍铬氧化物和铁镍氧化物）的溶解去污试验结果。选择的去污剂为0.3%草酸、0.1%柠檬酸和0.1%高锰酸钾。结果表明，实验温度为95℃、去污时间在6－48h范围内，0.3%草酸对铁镍铬氧化物和铁镍氧化物的溶解率分别为24.1%-65.3%和4.9%-64.4%；0.1%柠檬酸对二者的溶解率分别为2.2%-4.4%和0.37%-1.55%；0.1%高锰酸钾对二者几乎没有溶解作用。采用在草酸或柠檬酸去污前使用高锰酸钾去污剂的二步去污法，对两种氧化物的溶解度小于单独使用草酸或柠檬酸去污的一步法。     

环境电离模型辐射体源放射性核素活度浓度的HPGe γ谱仪就地测定

本工作建立了由圆柱型环境电离模型辐射体源发射的γ光子进入HPGe γ谱仪晶体发生相互作用以及γ光子能量沉积的物理数学模型,自编了蒙特卡罗(MC)模拟软件GED8.FOR;模拟计算了一台便携式就地HPGe γ谱仪(54.8 mm×57.9 mm,ε=30.3%,FWHM=1.71 keV)就地测量模型辐射体源内放射性核素活度浓度的校准因子.利用该谱仪对核工业放射性勘查计量站的圆柱型环境电离模型辐射体源内放射性核素活度浓度进行了就地测量分析,分别测得10个模型辐射体源内放射性核素(238U、226Ra、232Th和40K)的活度浓度值,并与上述模型辐射体源的取样分析结果进行比较.对各模型辐射体源内的主导放射性核素(即所掺矿粉且含量较高的核素)而言,两种方法的结果在±6.2%的偏差范围内吻合;对于非主导放射性核素偏差较大的原因进行了分析.     

混凝土工程冬期施工管理的几个问题

混凝土冬期施工管理中主要存在除冻剂的使用及质量控制、混凝土强度等级、测温工作、受冻临界强度检验等方面问题。文章结合工程质量检验实际情况,进行了具体分析。