Interactive visualization of three-dimensional magnetic fields

In order to observe the physical values (magnetic flux density and eddy current) in 3D magnetic field analysis, an interactive and highly manipulative visualization system depicting stereo images is intalled in a graphics workstation with high functional graphic processors. The system has the following characteristics:

• 1 An interactive and highly manipulative menu window with many functions: it enables visualization of complex phenomena in a 3D field through observation of various combinations of physical values from various viewpoints.
• 2 Simultaneous display of both magnetic flux density and eddy current by using the appropriate use of two colour display methods for stream lines and distribution maps of density: this function facilitates observation of the mutual relations between two physical values in a 3D field.
• 3 Animations and stereo displays: since they give extremely distinct images, observers can easily understand even highly complex 3D phenomena.

In this paper, the calculation method of density vectors, their display methods, and interactive functions are described. Some examples are also illustrated.     

Magnesium Modified β-Tricalcium Phosphate Induces Cell Osteogenic Differentiation In Vitro and Bone Regeneration In Vivo

In vitro, in vivo, and clinical studies have shown how the physicochemical and biological properties of β-tricalcium phosphate (β-TCP) work in bone regeneration. This study aimed to improve the properties of β-TCP by achieving optimum surface and bulk β-TCP chemical/physical properties through the hydrothermal addition of magnesium (Mg) and to later establish the biocompatibility of β-TCP/Mg for bone grafting and tissue engineering treatments. Multiple in vitro and in vivo analyses were used to complete β-TCP/Mg physicochemical and biological characterization. The addition of MgO brought about a modest rise in the number of β-TCP surface particles, indicating improvements in alkaline phosphatase (ALP) activity on day 21 (p < 0.05) and in the WST-1assay on all days (p < 0.05), with a corresponding increase in the upregulation of ALP and bone sialoprotein. SEM analyses stated that the surfaces of the β-TCP particles were not altered after the addition of Mg. Micro-CT and histomorphometric analysis from rabbit calvaria critical defects resulted in β-TCP/Mg managing to reform more new bone than the control defects and β-TCP control at 2, 6, and 8 weeks (* p ≤ 0.05, ** p ≤ 0.01, *** p ≤ 0.001, and **** p ≤ 0.0001). The hydrothermal addition of MgO to the β-TCP surfaces ameliorated its biocompatibility without altering its surface roughness resulting from the elemental composition while enhancing cell viability and proliferation, inducing more bone regeneration by osteoconduction in vivo and osteoblastic differentiation in vitro.     

Effect of Talc Size on Surface Roughness and Glossiness of Polypropylene Injection Molding Application to Automotive Plastics

Talc-containing polypropylene (PP) resin is extensively employed in automobiles. Herein, considering the microstructure transfer process in injection molding, the effect of the talc's dispersibility and particle size on this process and its impact on the gloss level of the product were investigated. Results show that a fine unevenness of about several micrometers was self-formed by the shrinkage of PP in nontransferred areas due to the blending of talc. Additionally, the amount of self-formed unevenness tended with an increase in the average particle size of talc. Furthermore, due to PP shrinkage and different densities of talc, it was observed that a fine tiger-stripe pattern was self-formed using special molds with modified microstructure. This self-formed fine unevenness changes the gloss level owing to the diffused light reflection effect. This study proposes controlling this change by controlling the average particle size of talc and structure of the mold. POLYM. ENG. SCI., 60:132–139, 2020. © 2019 Society of Plastics Engineers     

Interconnection reliability and interfacial structure between Au alloy bump and Al pad using ultrasonic bonding*

Flip chip technology with Au bumps on a substrace has been widely applied to electronic equipment such as smart phones. The purposes of this study are to examine the effect of Al pad thickness on the bondability of flip chip using ultrasonic bonding and to clarify interfacial structures between Au alloy bumps and Al pads by ultrasonic bonding compared before and after a thermal cycle test. Suitable Al thickness for excellent initial Au/Al bonding without chip cracking are 0.8 μm because a thin Al layer could not reduce stress to a chip under an Al pad during the ultrasonic bonding process. Intermetallic compounds between the Au alloy bump and chip after reflows consisted of five Au-Al layers, and a pure Al layer remained. On the other hand, after the temperature cycle test at 218/423 K, intermetallic compounds between the Au alloy bump and chip were changed into two kinds of Au-Al layers, so a pure Al layer did not exist. In addition, if thick intermetallic compound layers existed around the bonding region, bondability deteriorated easily by thermal stress due to a thermal cycle test, therefore the open failure rate was rising when the Au thickness was 1.2 μm.     

Open dumping site in Asian developing countries: a potential source of polychlorinated dibenz-p-dioxins and polychlorinated dibenzofurans

Open landfill dumping areas for municipal wastes in Asian developing countries have recently received particular attention with regard to environmental pollution problems. Because of the uncontrolled burning of solid wastes, elevated contamination by various toxic chemicals including dioxins and related compounds in these dumping sites has been anticipated. In this study, concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and coplanar polychlorinated biphenyls (PCBs) were determined in soils from dumping sites in the Philippines, Cambodia, India, and Vietnam. Residue concentrations of PCDD/Fs and coplanar PCBs in dumping site soils were apparently greater than those in soils collected in agricultural or urban areas far from dumping sites, suggesting that dumping sites are potential sources of PCDD/Fs and related compounds. Observed PCDD/F concentrations in soils from dumping sites in the Philippines and Cambodia were comparable or higher than those reported for dioxin-contaminated locations in the world (e.g., near the municipal waste incinerators and open landfill dumping sites). Homologue profiles of PCDD/Fs in dumping site soils from the Philippines and, to a lesser extent, from Cambodia and India reflected patterns of samples representing typical emissions, while profiles of agricultural or urban soils were similar to those of typical environmental sinks. This result suggests recent formation of PCDD/Fs in dumping site areas and that open dumping sites are a potential source of dioxins in Asian developing countries. Uncontrolled combustions of solid wastes by waste pickers, generation of methane gas, and low-temperature burning can be major factors for the formation of dioxins in dumping sites. Elevated fluxes of PCDD/Fs to soils in dumping sites were encountered in the Philippines, Cambodia, India, and Vietnam-Hanoi, and these levels were higher than those reported for other countries. Considerable loading rates of PCDD/Fs in the dumping sites of these countries were observed, ranging from 20 to 3900 mg/yr (0.12-35 mg TEQ/yr). PCDD/F concentrations in some soil samples from the Philippines, Cambodia, India, and Vietnam-Hanoi exceeded environmental guideline values, suggesting potential health effects on humans and wildlife living near these dumping sites. The estimated intakes of dioxins via soil ingestion and dermal exposure for children were higher than those for adults, suggesting greater risk of dioxin exposure for children in dumping sites. To our knowledge, this is the first comprehensive study on PCDD/Fs contamination in open dumping sites of Asian developing countries. On the basis of the result of this study, we have addressed a new environmental issue that open dumping sites are potential sources of PCDD/Fs and related compounds, and dioxin contamination in dumping sites may become a key environmental problem in developing countries.     

Relationship Between Structure and Coordination Strength of N and N,O-Hybrid Donor Ligands with Trivalent Lanthanides

ABSTRACT

To effectively separate lanthanides (Ln(III)) from actinides (An(III)), symmetrical 2,2′-bipyridyl (Bpy), 1,10-phenanthroline (Phen), and unsymmetrical N-methyl-N-tolyl-1,10-phenanthroline-2-carboxamide (MeTol-PTA) were investigated. According to the crystal structures and EXAFS experiments, the decreasing ionic radius from light to heavy Ln led to decreases in the Ln–N (Bpy) and Ln–N (Phen) distances, while log β simply increased due to the electrostatic interaction and the order of Ln–O (MeTol-PTA) < Ln–N (Bpy, Phen) < Ln–N (MeTol-PTA) was obtained. This indicated that the bulky phenanthroline moiety of MeTol-PTA may not allow N (MeTol-PTA) to come close to Ln. Consequently, the log β of MeTol-PTA exhibited a local maximum (around Nd).     

PMMA-SiO2杂化材料对天然橡胶的增强作用

提取了活性硅烷醇,用自由基共聚合法成了含硅高聚物,分析了SiO2含量对硫化天然橡胶力学性能的影响。     

Perpendicular oriented cylinders via directional coalescence of spheres embedded in block copolymer films induced by solvent annealing

Polystyrene-b-poly(methyl acrylate) (PS-b-PMA) block copolymer with PS volume fraction of 25.2 vol% was synthesized by atom transfer radical polymerization. Non-pretreated silicon wafers were used as the substrates to prepare perpendicular oriented PS cylinders in PMA matrix via solvent annealing which could induce the transformation of spheres to vertically oriented and hexagonally packed cylinders. The spherical microdomains were formed after the evaporation of solvents from the solutions of the block copolymer in selective solvents mixed from methanol, acetone and dichloromethane. The thickness of films could be as thick as 1000 nm, which were much thicker than usual cases and the cylinders came from the directional coalescence of the spheres, thus any pre-treatments of the substrates were not required for perpendicular orientation. The structures were characterized by small angle X-ray scattering (SAXS), transmission electron microscope (TEM), atom force microscopy (AFM) and grazing incidence small angle X-ray scattering (GISAXS).     

Preparation of poly(ethylene glycol)-modified poly(amidoamine) dendrimers with a shell of hydrophobic amino acid residues and their function as a nanocontainer

We studied the use of poly(ethylene glycol) (PEG)-modified dendrimers as a nanocapsule with a biocompatible surface. We designed PEG-modified dendrimers having a shell of hydrophobic amino acid residues in the peripheral moiety of the dendrimer to increase their encapsulation ability. Subsequently, l-phenylalanine or γ-benzyl-l-glutamate residues were introduced to all chain ends of the poly(amidoamine) G4 dendrimers. Furthermore, PEG (MW 2000) chains were attached to the amino acid residues. These hydrophobic amino acid residues rendered the PEG-modified dendrimers as more compact. After binding of Rose Bengal (RB) guest molecules to dendrimers, an assay using the Klotz plot showed that the hydrophobic amino acid layer slightly affected the guest site number, but significantly increased intrinsic binding of the dendrimers to guest molecules. The PEG-modified dendrimers with the hydrophobic amino acid layer were better able to retain guest molecules than the dendrimer without the layer: they are therefore useful for drug delivery.