Design of a compact protrudent‐shaped ultra‐wideband multiple‐input‐multiple‐output/diversity antenna with band‐rejection capability

In this endeavor, a new multiple‐input‐multiple‐output antenna with a sharp rejection at wireless local area network (WLAN) band is designed and practically examined for portable wireless ultra‐wideband applications. The intended diversity antenna possess a small size of 15 mm × 26 mm and two inverted L‐strip are loaded over the conventional rectangular patch antenna to form protrudent‐shaped radiator that acts as a radiating element. The sharp band‐rejection capability at WLAN is established by incising the L‐shaped slits at the decoupling structure. More than ?21 dB isolation is accomplished for the complete working band (ie, 2.87 ‐17 GHz). Degradation in the antenna efficiency at the center frequency of band rejection corroborates the good interference rejection capability. The working capabilities of the intended antenna are tested by using the isolation between the ports, total efficiency, gain, envelope correlation coefficient, radiation pattern, mean effective gain, and total active reflection coefficient.     

Analysis of three-dimensional transient seepage into ditch drains from a ponded field

An analytical solution in the form of infinite series is developed for predicting time-dependent three-dimensional seepage into ditch drains from a flat, homogeneous and anisotropic ponded field of finite size, the field being assumed to be surrounded on all its vertical faces by ditch drains with unequal water level heights in them. It is also assumed that the field is being underlain by a horizontal impervious barrier at a finite distance from the surface of the soil and that all the ditches are being dug all the way up to this barrier. The solution can account for a variable ponding distribution at the surface of the field. The correctness of the proposed solution for a few simplified situations is tested by comparing predictions obtained from it with the corresponding values attained from the analytical and experimental works of others. Further, a numerical check on it is also performed using the Processing MODFLOW environment. It is noticed that considerable improvement on the uniformity of the distribution of the flow lines in a three-dimensional ponded drainage space can be achieved by suitably altering the ponding distribution at the surface of the soil. As the developed three-dimensional ditch drainage model is pretty general in nature and includes most of the common variables of a ditch drainage system, it is hoped that the drainage designs based on it for reclaiming salt-affected and water-logged soils would prove to be more efficient and cost-effective as compared with designs based on solutions developed by making use of more restrictive assumptions. Also, as the developed model can handle three-dimensional flow situations, it is expected to provide reliable and realistic drainage solutions to real field situations than models being developed utilizing the two-dimensional flow assumption. This is because the existing two-dimensional solutions to the problem are actually valid not for a field of finite size but for an infinite one only.     

Sparse Approximation of 3D Meshes Using the Spectral Geometry of the Hamiltonian Operator

The discrete Laplace operator is ubiquitous in spectral shape analysis, since its eigenfunctions are provably optimal in representing smooth functions defined on the surface of the shape. Indeed, subspaces defined by its eigenfunctions have been utilized for shape compression, treating the coordinates as smooth functions defined on the given surface. However, surfaces of shapes in nature often contain geometric structures for which the general smoothness assumption may fail to hold. At the other end, some explicit mesh compression algorithms utilize the order by which vertices that represent the surface are traversed, a property which has been ignored in spectral approaches. Here, we incorporate the order of vertices into an operator that defines a novel spectral domain. We propose a method for representing 3D meshes using the spectral geometry of the Hamiltonian operator, integrated within a sparse approximation framework. We adapt the concept of a potential function from quantum physics and incorporate vertex ordering information into the potential, yielding a novel data-dependent operator. The potential function modifies the spectral geometry of the Laplacian to focus on regions with finer details of the given surface. By sparsely encoding the geometry of the shape using the proposed data-dependent basis, we improve compression performance compared to previous results that use the standard Laplacian basis and spectral graph wavelets.     

FAST

We propose Frontier Allocation Synchronized by Token passing (FAST), a distributed algorithm for online terrain coverage using multiple mobile robots, ensuring mutually exclusive selection of frontier cells. Many existing approaches cover the terrain in an irregular fashion, without considering the usability of the already covered region. For instance, in the task of floor cleaning in an office building, these approaches do not guarantee the cleanliness of large unbroken areas until a majority of the task is complete. FAST on the other hand, incrementally traverses the terrain generating structured trajectories for each robot. Following a structured trajectory for coverage path planning is proven to be a very powerful approach in literature. This renders large portions of the terrain usable even before the completion of the coverage task. The novel map representation techniques used in FAST render it scalable to large terrains, without affecting the volume of communication among robots. Moreover, the distributed nature of FAST allows incorporation of fault-tolerance mechanisms. Empirical investigations on maps of varied complexities and sizes both in simulation and on an experimental test-bed demonstrate that the proposed algorithm performs better than some of the benchmark approaches in terms of coverage completion time and less redundant coverage.     

Magnetic and dielectric studies of barium hexaferrite (BaFe 12 O 19 ) ceramic synthesized by chemical route

Barium hexaferrite BaFe12O19 (BHF) ceramic was synthesized by chemical route on sintering at 1050 °C for 12 h. The synthesized material was characterized by XRD, SEM, AFM and TEM analysis. Metal oxide stretching frequencies corresponding to Fe-O, Ba-O, and Fe-O-Fe bands are confirmed by FTIR studies. The hexagonal nature of the BHF ceramic was confirmed by TEM analysis and Rietveld refinement with space group P63/mmc. The particle size observed by TEM is 175 nm. The root means square and average roughness were found to be 61.048 nm and 44.025 nm respectively. The M-T and M-H hysteresis loop indicates temperature dependent ferromagnetic behavior of BHF ceramic. The temperature and frequency dependent dielectric properties were explained by Maxwell-Wagner theory. The value of dielectric constant (ε′) for BHF ceramic was found to be 22× 103 at 100 Hz and 483 K.     

The Impact of Sequential Fluorination of π‐Conjugated Polymers on Charge Generation in All‐Polymer Solar Cells

The performance of all‐polymer solar cells (all‐PSCs) is often limited by the poor exciton dissociation process. Here, the design of a series of polymer donors ( P1 – P3 ) with different numbers of fluorine atoms on their backbone is presented and the influence of fluorination on charge generation in all‐PSCs is investigated. Sequential fluorination of the polymer backbones increases the dipole moment difference between the ground and excited states (Δµ_ge) from P1 (18.40 D) to P2 (25.11 D) and to P3 (28.47 D). The large Δµ_ge of P3 leads to efficient exciton dissociation with greatly suppressed charge recombination in P3 ‐based all‐PSCs. Additionally, the fluorination lowers the highest occupied molecular orbital energy level of P3 and P2 , leading to higher open‐circuit voltage (V_OC). The power conversion efficiency of the P3 ‐based all‐PSCs (6.42%) outperforms those of the P2 and P1 (5.00% and 2.65%)‐based devices. The reduced charge recombination and the enhanced polymer exciton lifetime in P3 ‐based all‐PSCs are confirmed by the measurements of light‐intensity dependent short‐circuit current density (J_SC) and V_OC, and time‐resolved photoluminescence. The results provide reciprocal understanding of the charge generation process associated with Δµ_ge in all‐PSCs and suggest an effective strategy for designing π‐conjugated polymers for high performance all‐PSCs.     

Online model-based diagnosis to support autonomous operation of an advanced life support system

This article describes methods for online model-based diagnosis of subsystems of the advanced life support system (ALS). The diagnosis methodology is tailored to detect, isolate, and identify faults in components of the system quickly so that fault-adaptive control techniques can be applied to maintain system operation without interruption. We describe the components of our hybrid modeling scheme and the diagnosis methodology, and then demonstrate the effectiveness of this methodology by building a detailed model of the reverse osmosis (RO) system of the water recovery system (WRS) of the ALS. This model is validated with real data collected from an experimental testbed at NASA JSC. A number of diagnosis experiments run on simulated faulty data are presented and the results are discussed.     

Comparison and validation of drug loading parameters of PEGylated nanoparticles purified by a diafiltration centrifugal device and tangential flow filtration

This article describes drug loading validation of nanoparticles. Ultracentrifugation was avoided because of problems arising from small-sized particles. Ultrafiltration was adopted in two different modes followed by monitoring of polyvinyl alcohol (PVA), dextran sulfate (DS), and loperamide HCl contents. Diafiltration centrifugation removed all PVA at the fourth cycle and provided significantly (p = .000, .017) higher drug loading values compared with tangential flow filtration (TFF). This was due to residual PVA associated with the nanoparticles. TFF enabled satisfactory dry weight recovery (101.66 +/- 4.45%, n = 3) of nanoparticles during extended purification. Indirect drug loading (from the purification curve) was not significantly different (p = .450, .487) to the direct drug loading values. Encapsulation parameters were obtained from the purification curve once quantitative estimation of the all formulation components was established.     

Stiffness Matrices of Isoparametric Four-Node Finite Elements by Exact Analytical Integration

Explicit algebraic expressions needed to compute element stiffness matrices using procedural (FORTRAN) and object oriented (C++) computer programs are presented. Numerical illustrations for a convex quadrilateral and a triangle with a side node are included. The wide controversy due to conventional element level approximate numerical quadrature within the computational square domain in η and ξ coordinates is completely resolved here by the closed form analytical integration within the physical element, in x and y coordinates.     

Ultra-thin crystalline films of CdSe and CuSe formed at the organic-aqueous interface

Two-dimensional nanostructures in the form of ultra-thin crystalline films of CdSe and CuSe have been prepared at the organic-aqueous interface by reacting toluene solutions of metal cupferronates with an aqueous solution of N,N-dimethyl selenourea. The films have been examined using electron microscopy and optical spectroscopy. At lower concentrations of the reacting species, the CdSe films formed at the toluene-water interface at approximately 30 degrees C consisted mostly of nanocrystals. With increase in concentration as well as temperature, the interface reaction yielded thicker films which are mostly single-crystalline. We have studied the time-dependent growth of the CdSe film at the interface using UV-visible absorption spectroscopy. Ultra-thin films of CuSe formed at the toluene-water interface are generally single-crystalline.