Air classification of pea flour–analytical studies

The pea-milling and subsequent air classification of whole peas was investigated on laboratory scale equipment. Two approximately linear but divergent calibration graphs were constructed for the air classifier based on two different definitions of particle size cut-point. At high classifying speed (11 000 rev min^?1) a fine fraction or protein concentrate was produced containing 55.1% protein (cf. 22% in original flour) although this represented only 29% of the total protein. The yield of protein in the fine fraction could be increased by using a three-stage milling and classifying procedure, although the actual protein content of the concentrate remained more or less the same. This procedure also had the effect of reducing protein contamination of the starch (coarse) fraction. Other effects of air classifying observed included the concentration of the lipid component into the fine fraction and the rough fractionation of the fibre constituent between the coarse (testa) and fine (cell wall material) fractions. Various aspects and problems associated with the use of air classification for the preparation of pea protein concentrates are discussed.     

Associations Between Message Features and Subjective Evaluations of the Sensation Value of Antidrug Public Service Announcements

The effective targeting of high sensation-seeking adolescents, who are most at risk for drug abuse, requires the creation of high sensation value messages. Whereas previous research has focused on subjective reactions of receivers as the primary way to define message sensation value (MSV), we conceptualize message sensation value as the formal and content features (audio, visual, and format) of a message that contribute to subjective message sensation evaluations. The three objectives of this study were (a) to identify message design features that would aid in the development of effective prevention messages targeting high sensation seekers, (b) to develop an objective measure of message sensation value based on formal and content features of messages, and (c) to determine whether high message sensation value messages were associated with higher subjective evaluations of message sensation value. In the present study, 418 undergraduates each viewed 10 PSAs selected at random from a pool of 109 PSAs that had been previously coded for message sensation value. Analyses provide support for the central hypothesis of the study, indicating that perceived message sensation value is at least in part a product of the formal and content features of a PSA.     

Revisiting the Worksite in Worksite Health Campaigns: Evidence From a Multisite Organ Donation Campaign

This article advances the beginnings of a general theory of organizational features to aid in understanding why health campaigns that work well in one organization may be ineffectual in another organization. The physical, social, and information structures of organizations are theorized to create an interaction environment that is distinct to each organization and that influences health campaigns. To test this argument, an organ donation campaign was conducted in 46 organizations. Multilevel modeling yielded mixed findings. Physical structure was negatively associated with signing an organ donor card. Social structure and information structure were positively associated with communication with coworkers about donation and communicative peer influence. Industry type was positively associated with knowledge change.     

Feasibility of manual teach-and-replay and continuous impedance shaping for robotic locomotor training following spinal cord injury

Robotic gait training is an emerging technique for retraining walking ability following spinal cord injury (SCI). A key challenge in this training is determining an appropriate stepping trajectory and level of assistance for each patient, since patients have a wide range of sizes and impairment levels. Here, we demonstrate how a lightweight yet powerful robot can record subject-specific, trainer-induced leg trajectories during manually assisted stepping, then immediately replay those trajectories. Replay of the subject-specific trajectories reduced the effort required by the trainer during manual assistance, yet still generated similar patterns of muscle activation for six subjects with a chronic SCI. We also demonstrate how the impedance of the robot can be adjusted on a step-by-step basis with an error-based, learning law. This impedance-shaping algorithm adapted the robot's impedance so that the robot assisted only in the regions of the step trajectory where the subject consistently exhibited errors. The result was that the subjects stepped with greater variability, while still maintaining a physiologic gait pattern. These results are further steps toward tailoring robotic gait training to the needs of individual patients.     

Effects of a-Si:H resist vacuum-lithography processing on HgCdTe

A vacuum-compatible process for carrying out lithography on Hg_1−xCd_xTe and CdTe films was previously demonstrated. It was shown that hydrogenated amorphous silicon (a-Si:H) could be used as a dry resist by projecting a pattern onto its surface using excimer laser irradiation and then developing that pattern by hydrogen plasma etching. Pattern transfer to an underlying Hg_1−xCd_xTe film was then carried out via Ar/H₂ plasma etching in an electron cyclotron resonance (ECR) reactor. Despite the successful demonstration of pattern transfer, the possibility of inducing harmful effects in the Hg_1−xCd_xTe film due to this vacuum lithography procedure had not been explored. Here we present structural and surface compositional analyses of Hg_1−xCd_xTe films at key stages of the a-Si:H vacuum lithography procedure. X-ray diffraction double crystal rocking curves taken before and after a-Si:H deposition and after development etching were identical, indicating that bulk structural changes in the Hg_1−xCd_xTe film are not induced by these processes. Cross-section transmission electron microscopy studies show that laser-induced heating in the 350 nm thick a-Si:H overlayer is not sufficient to cause structural damage in the underlying Hg_1−xCd_xTe surface. In vacuo surface analysis via Auger electron spectroscopy and ion scattering spectroscopy suggest that the hydrogen plasma development process produces Hg-deficient surfaces but does not introduce C contamination. However, after ECR plasma etching into the Hg_1−xCd_xTe film, the measured x value is much closer to that of the bulk.     

1.4-/spl mu/m InGaAsP-InP strained multiple-quantum-well laser for broad-wavelength tunability

InGaAsP-InP strained multiple-quantum-well (MQW) lasers for extended wavelength tunability in external cavity operation were designed, fabricated, and tested. The active layer was a strain compensated structure consisting of three 3.2/spl plusmn/0.3 nm and three 6.4/spl plusmn/0.3 nm 1.0% compressive strained wells and five 10.3/spl plusmn/0.3 nm 0.45% tensile strained barrier layers. A 2-/spl mu/m-wide ridge waveguide laser of length 250 /spl mu/m, when used in a grating external cavity and with no coatings to alter the reflectivity of the facets, was observed to operate over a range >110 nm. The lasers were designed for applications in trace gas and liquid detection with the goal to maximize the tunable range when operated in external cavities and with no facet coatings.     

Ochratoxin A in dried vine fruit: method development and survey

A method is described for the determination of concentrations of the mycotoxin ochratoxin A in dried vine fruits (currants, raisins and sultanas) using acidic methanolic extraction,immunoaffinity chromatography clean-up and HPLC determination. The limit of detection was estimated as 0.2mug/kg, and recoveries of 63-77% were achieved at 5mug/kg. HPLC-mass spectrometric confirmation of the identity of ochratoxin was obtained. Ochratoxin A and aflatoxins were determined in 60 samples of retail dried vine fruits purchased in the United Kingdom. Ochratoxin A was found in excess of 0.2mug/kg in 19 of 20 currant, 17 of 20 sultana and 17 of 20 raisin samples examined, an overall incidence of 88% . The maximum level found was 53.6mug/kg. No aflatoxin was found in any sample analysed, using a method with a detection limit of 0.2mug/kg for each of aflatoxin B1, B2, G1 and G2.     

Surveillance of stored grain from the 1997 harvest in the United Kingdom for ochratoxin A

This survey examined 306 samples of farm-stored wheat, barley and oats as received at, or tested by, central grain depots in the UK. Samples were taken from lorries or from stored grain using the existing inhouse procedures used for quality checking and examined for ochratoxin A using a fully validated analytical HPLC method with a detection limit of 0.1 μg/kg. Ochratoxin A was detected in 21 % of the samples examined, with barley more frequently contaminated than wheat. Mean concentrations of ochratoxin A found for all samples were 0.69 μg/kg in barley, 0.29 μg/kg in wheat and 0.15 μg/kg in oats. The highest concentration found was 17.8 μg/kg in a barley feed although concentrations of 81 and 30 μg/kg were found in 'reject-grade' wheat samples whose results were excluded from the main survey. In summary, 2.7 and 0.3 % of samples exceeded concentrations of 5 and 10 μg/kg respectively. There appeared to be significant relationships between ochratoxin A concentrations and moisture content, storage time and geographical area. Although conditions at harvest in 1997 were quite variable countrywide and often wet, results were similar to those found in earlier surveys carried out in the UK.     

Cyclic code weight spectra and BIST aliasing

In built-in self-test for logic circuits, test data reduction can be achieved using a linear feedback shift register. The probability that this data reduction will allow a faulty circuit to be declared good is the probability of aliasing. Based on the independent bit-error model, we show that the code spectra for the cyclic code generated by the feedback polynomial can be used to obtain an exact expression for the aliasing probability of a multiple input signature register when the test length is a multiple of the cycle length. Several cases are examined and, as expected, primitive feedback polynomials provide the best performance. Some suggestions to avoid peaks in the aliasing probability are given.     

Design and Characterization of Fabry–Pérot MEMS-Based Short-Wave Infrared Microspectrometers

Microspectrometers based on the monolithic integration of a microelectromechanical system (MEMS) Fabry–Pérot filter and a Hg _x Cd_1–x Te-based infrared detector are discussed and measured results presented. The microspectrometers are designed to operate in the 1.5 μm to 2.6 μm wavelength range. Design equations are presented which account for the mechanical and optical characteristics of the device. Measurements indicate linewidths as narrow as 55 nm, switching times of 40 μs, and a tuning range of 380 nm, which is limited by snap-down. Optical characterization of the distributed Bragg mirrors and the Fabry–Pérot filter are presented, and these are shown to be in good agreement with simple first-order analytical models. Bowing of the movable Fabry–Pérot mirror due to stress gradients is identified as the dominant source of linewidth broadening.