Microbial community composition and reactor performance during hydrogen production in a UASB reactor fed with raw cheese whey inoculated with compost

This study investigated the microbial community developed in a UASB reactor for hydrogen production and correlated it to reactor performance. The reactor was inoculated with kitchen waste compost and fed with raw cheese whey at two organic loading rates, 20 gCOD/Ld and 30 gCOD/Ld. Hydrogen production was very variable, using an OLR of 30 gCOD/Ld averaged 1.0 LH(2)/Ld with no methane produced under these conditions. The hydrogen yield was also very variable and far from the theoretical. This low yield could be explained by selection of a mixed fermentative population with presence of hydrogen producing organisms (Clostridium, Ruminococcus and Enterobacter) and other non-hydrogen producing fermenters (Lactobacillus, Dialister and Prevotella). The molecular analysis of the raw cheese whey used for feeding revealed the presence of three predominant organisms that are affiliated with the genera Buttiauxella (a low-yield hydrogen producer) and Streptococcus (a lactic acid-producing fermenter). Although these organisms did not persist in the reactor, the continuous addition of these fermenters could decrease the reactor's hydrogen yield.     

Exposure to dust, endotoxin and airborne microorganisms in wastewater sludge thermal drying units

The objective of this study was to assess workers' exposure to bioaerosols in sludge drying units. Simultaneous collection of inhalable dust and airborne biological agents was carried out using rotating cup samplers (CIP 10, Arelco). Sixteen stationary and 30 personal measurements were performed in three drying plants, during summer and winter. Microbial content of air was characterized by high amounts of Gram-negative bacteria, endotoxin, and thermophilic actinomycetes. High differences between exposure levels were observed with regard to workplaces and tasks. Dryers and conveyors in operation were closed, and the monitoring task in the dryer room was associated with low levels of personal exposure, close to background levels. Conversely, cleaning and maintenance of the dryer and conveyors required the equipment to be opened, giving significantly higher task-based personal exposure levels. The fall of dried sludge into indoor containers resulted in high emission and spreading of dust. Mean personal exposure levels to fungi were moderate or low for all tasks. Based on the results of this study, appropriate means of operational control and personal protection are being developed and implemented on sites.     

Effect of solution chemistry and operating conditions on the nanofiltration of acid dyes by a nanocomposite membrane

A composite nanofiltration membrane was developed by a poly(acrylic acid) in situ ultraviolet (UV) graft polymerization process using an ultrafiltration polysulfone membrane as a porous support, by a phase inversion method. SEM images showed that the PSf membranes had numerous finger-like pores. Atomic force microscopy (AFM) showed that the roughness of the surface was reduced by an increase in UV irradiation times. The rejections of sodium chloride and sodium sulfate were moderate and declined with the increase of concentration. We observed that by increasing UV irradiation time and nanofiltration pressure applied, retention of dyes was enhanced and in the most irradiated membrane (M-4 membrane) at 4 bars, color removal with a high rejection of about 99.80% was achieved. It was found that the separation efficiency of dyes in the mixture of salt and dyes decreased with the salt concentration due to a decrease in the Donnan effect. It was also found that by varying the pH, the membrane surface and the dyes' charges are changed, which meant that the membrane surface and dyes had different interactions at various pHs.     

Restoration of stormwater retention capacity at the allotment-scale through a novel economic instrument

Urbanisation results in changes to runoff behaviour which, if not addressed, inevitably degrade receiving waters. To date, most stormwater management has focussed on the streetscape and public open space. Given that much of the catchment imperviousness is located on private land, we developed and tested a novel economic instrument (a uniform price auction) for encouraging allotment-scale stormwater retention. We evaluated bids using an integrated environmental benefit index (EBI), based on the ability of the proposed works to reduce runoff frequency, pollutant loads and to reduce potable water demand. The uniform price auction resulted in 1.4 ha of impervious areas being effectively 'disconnected' from the stormwater system. The EBI provided an objective and transparent method of comparing bids, which varied in the type of works proposed (e.g. rainwater tank, rain-garden), the cost and the resulting environmental benefit. Whilst the pilot auction was a success, the public subsidy of works undertaken was around 85%, meaning that property owners a relatively small private benefit in the works. Future auction rounds will be revised to (i) test an EBI which is more focussed on the protection of streams (assessing changes to runoff frequency, baseflow volumes and water quality) and (ii) provide an auction process which is simpler to understand, and provides greater practical support for landholders who wish to undertake works.     

Spike train decoding without spike sorting

We propose a novel paradigm for spike train decoding, which avoids entirely spike sorting based on waveform measurements. This paradigm directly uses the spike train collected at recording electrodes from thresholding the bandpassed voltage signal. Our approach is a paradigm, not an algorithm, since it can be used with any of the current decoding algorithms, such as population vector or likelihood-based algorithms. Based on analytical results and an extensive simulation study, we show that our paradigm is comparable to, and sometimes more efficient than, the traditional approach based on well-isolated neurons and that it remains efficient even when all electrodes are severely corrupted by noise, a situation that would render spike sorting particularly difficult. Our paradigm will also save time and computational effort, both of which are crucially important for successful operation of real-time brain-machine interfaces. Indeed, in place of the lengthy spike-sorting task of the traditional approach, it involves an exact expectation EM algorithm that is fast enough that it could also be left to run during decoding to capture potential slow changes in the states of the neurons.     

A robust test of uncertain linear systems

In this paper, it is shown that for low-order uncertain systems, there is no need to calculate all the minimum and maximum values of the coefficients for a perturbed system which is expressed in terms of polynomials and hence no need to formulate and test all the four Kharitonov＇s polynomials. Furthermore, for higher-order systems such as n ≥ 5, the usual four Kharitonov＇s polynomials need not be tested initially for sufficient condition of perturbed systems; rather, the necessary condition can be checked before going for sufficient condition. In order to show the effectiveness of the proposed method, numerical examples are shown and computational efficiency is highlighted.     

Genetic based sensorless hybrid intelligent controller for strip loop formation control between inter-stands in hot steel rolling mills

Safe operating environment is essential for all complex industrial processes. The safety issues in steel rolling mill when the hot strip passes through consecutive mill stands have been considered in this paper. Formation of sag in strip is a common problem in the rolling process. The excessive sag can lead to scrap runs and damage to machinery. Conventional controllers for mill actuation system are based on a rolling model. The factors like rise in temperature, aging, wear and tear are not taken into account while designing a conventional controller. Therefore, the conventional controller cannot yield a requisite controlled output. In this paper, a new Genetic-neuro-fuzzy hybrid controller without tension sensor has been proposed to optimize the quantum of excessive sag and reduce it. The performance of the proposed controller has been compared with the performance of fuzzy logic controller, Neuro-fuzzy controller and conventional controller with the help of data collected from the plant. The simulation results depict that the proposed controller has superior performance than the other controllers.     

Fast capacitive probe for electromagnetic pulse diagnostic

In this work, we report the study and the development of a capacitive probe which is suitable for getting fast and high voltage/current measurements. Due to the fact that fast pulses propagate generally in coaxial structures, the probe realized in this work was a capacitive divider with the divider electrode properly designed to assure the same characteristic impedance of the coaxial structure and the recombination time of the split signals during the propagation. It was a folded cylindrical ring of 1.4 cm long and 0.8 cm thick, which introduce a theoretical delay time of about 100 ps. Analyzing the behavior of the probe closed on 520 Omega, the voltage amplification resulted to be of (3.6+/-0.1) x 10(-4) and, as a consequence, the current attenuation factor of 56+/-1 AV. The response rise time was less than 320 ps, which was limited by oscilloscope bandwave. The capacitor probe can operate voltage measurements of the order of 100 kV.     

Precise selective deposition of microparticles on electrodes of microelectronic chips

We examined the high precision deposition of toner and polymer microparticles with a typical size of approximately 10 microm on electrode arrays with electrodes of 100 microm and below using custom-made microelectronic chips. Selective desorption of redundant particles was employed to obtain a given particle pattern from preadsorbed particle layers. Microparticle desorption was regulated by dielectrophoretic attracting forces generated by individual pixel electrodes, tangential detaching forces of an air flow, and adhesion forces on the microchip surface. A theoretical consideration of the acting forces showed that without pixel voltage, the tangential force applied for particle detachment exceeded the particle adhesion force. When the pixel voltage was switched on, however, the sum of attracting forces was larger than the tangential detaching force, which was crucial for desorption efficiency. In our experiments, appropriately large dielectrophoretic forces were achieved by applying high voltages of up to 100 V on the pixel electrodes. In addition, electrode geometries on the chip's surface as well as particle size influenced the desorption quality. We further demonstrated the compatibility of this procedure to complementary metal oxide semiconductor chip technology, which should allow for an easy technical implementation with respect to high-resolution microparticle deposition.     

Development and spatial organization of the air conduits in the lung of the domestic fowl, Gallus gallus variant domesticus

We employed macroscopic and ultrastructural techniques as well as intratracheal casting methods to investigate the pattern of development, categories, and arrangement of the air conduits in the chicken lung. The secondary bronchi included four medioventral (MVSB), 7-10 laterodorsal (LDSB), 1-3 lateroventral (LVSB), several sacobronchi, and 20-60 posterior secondary bronchi (POSB). The latter category has not been described before and is best discerned from the internal aspect of the mesobronchus. The secondary bronchi emerged directly from the mesobronchus, except for the sacobronchi, which sprouted from the air sacs. Parabronchi from the first MVSB coursed craniodorsally and inosculated their cognates from the first two LDSB. The parabronchi from the rest of the LDSB curved dorsomedially to join those from the rest of the MVSB at the dorsal border. Sprouting, migration, and anastomoses of the paleopulmonic parabronchi resulted in two groups of these air conduits; a cranial group oriented rostrocaudally and a dorsal group oriented dorsoventrally. The neopulmonic parabronchial network formed through profuse branching and anastomoses and occupied the ventrocaudal quarter of the lung. There were no differences in the number of secondary bronchi between the left and right lungs. Notably, a combination of several visualization techniques is requisite to adequately identify and enumerate all the categories of secondary bronchi present. The 3D arrangement of the air conduits ensures a sophisticated system, suitable for efficient gas exchange. Microsc. Res. Tech., 2008. (c) 2008 Wiley-Liss, Inc.