Similarity of Stress-Singularity Problems for Materials with Linear and Bilinear Behaviors

An analogy is established between the solutions of the problems of singularities of stresses in linear and bilinear elastic isotropic media. It is shown that the distributions of stresses and displacements in the vicinity of singular points on the boundary of the body (characterized by the singularities of stresses) are described, in both cases, by the same functional dependences on the space coordinates but with different characteristics of the material. We deduce expressions for the effective moduli of elasticity and Poisson's ratio of the bielastic medium including the parameter of hardening of the material. The solution of the problem of singularities of stresses in bilinear materials is obtained from the solution of the corresponding problem for the linear elastic medium by replacing the elastic constants with the corresponding effective values depending on the parameter of hardening of the material. The cases of wedge-shaped notches (for various boundary conditions imposed on their edges), two-component wedges, plane wedge-shaped cracks, and circular conic notches or rigid inclusions in the bielastic space are studied in detail.     

"What is in a word? No versus Yes differentially engage the lateral orbitofrontal cortex": Correction.

Reports an error in "What is in a word? No versus Yes differentially engage the lateral orbitofrontal cortex" by Nelly Alia-Klein, Rita Z. Goldstein, Dardo Tomasi, Lei Zhang, Stephanie Fagin-Jones, Frank Telang, Gene-Jack Wang, Joanna S. Fowler and Nora D. Volkow (Emotion, 2007[Aug], Vol 7[3], 649-659). The supplemental materials link should appear as follows: http://dx.doi.org/10.1037/1528-3542.7.3.649.supp. (The following abstract of the original article appeared in record 2007-11660-018.) The words "No" and "Yes" are involved in conditioning to prohibit or encourage behavior, respectively. The authors, therefore, hypothesized that these words would be attributed to endogenous valence, activating neuronal circuits involved with valence and emotional control. Functional MRI (fMRI) at 4 Tesla was used to record regional brain activity while participants were exposed to emphatic vocalizations of the words. Results showed that No and Yes were associated with opposite brain-behavior responses; while No was negatively valenced, produced slower response times, and evoked a negative signal in the right lateral orbitofrontal cortex (OFC), Yes was positively valenced, produced faster response times, and evoked a positive signal in a contiguous region of the OFC. Attribution of negative valence to No and trait anger control were associated with increased responsivity of the OFC to No. Inasmuch as sensitivity to the prohibitive command No develops during childhood through interaction with primary caregivers as the first social objects, our findings may implicate the lateral OFC in the neurobiology of emotion regulation and subsequent social development. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Semi-solid rapid compression testing of spray-formed hypereutectic Al-Si alloys

The rheology of Al-30Si-5Cu and Al-30Si-5Cu-2Mg spray-formed alloys has been characterized after holding at various times and temperatures, using semisolid rapid compression to obtain load-displacement curves. Microstructures were examined after partial remelting and compression in an attempt to understand the flow behavior. The initial resistance to flow generally increased with holding time at temperature. This increase was attributed to the increased strength of a three-dimensional (3-D) solid silicon network present in these alloys in the semisolid state, with the initial resistance to flow smaller in the magnesium-containing alloys. With increased temperature, the initial resistance decreased due to increased liquid content and grain spheroidization. The viscosity vs shear rate response was studied using the approach of Laxmanan and Flemings. The materials shear thinned rapidly during the test conditions, in which the shear rate rapidly increased from approximately 2.5 to 92 s⁻¹. The results were fitted to a power-law model, and the viscosities showed a drop of approximately two to four orders of magnitude when extrapolated to a shear rate of 1000 s⁻¹ (a typical value in actual component manufacture). The rapid compression test, which is close to conditions present in component manufacture, was shown to have more in common with a shear rate jump experiment, rather than steady-state viscometry.     

Finite sample properties of estimators of spatial autoregressive models with autoregressive disturbances

The article investigates the finite sample properties of estimators for spatial autoregressive models where the disturbance terms may follow a spatial autoregressive process. In particular we investigate the finite sample behavior of the feasible generalized spatial two-stage least squares (FGS2SLS) estimator introduced by Kelejian and Prucha (1998), the maximum likelihood (ML) estimator, as well as that of several other estimators. We find that the FGS2SLS estimator is virtually as efficient as the ML estimator. This is important because the ML estimator is computationally burdensome, and may even be forbidding in large samples, while the FGS2SLS estimator remains computationally feasible in large samples. Received: 20 January 2001 / Accepted: 31 August 2001     

Physicochemical principles of preparation of emulsion fuels

The basic physicochemical principles of preparation of emulsion fuel compositions based on heavy and extra-heavy crude cuts were analyzed with consideration of the nature and content of the phases constituting the emulsion, type of chemical additives — emulsifiers and stabilizers, and type of equipment for production of emulsion fuels. __________ Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 5, pp. 51–56, September–October, 2007.     

Influence of halide ions and alloy microstructure on the passive and localized corrosion behavior of alloy 22

Alloy 22 (N06022) is the current candidate alloy used to fabricate the external wall of the high-level nuclear waste containers for the Yucca Mountain repository. It was of interest to study and compare the general and localized corrosion susceptibility of Alloy 22 in fluoride and chloride solutions at 90 °C. Standard electrochemical tests such as cyclic potentiodynamic polarization, amperometry, and electrochemical impedance spectroscopy were used. Studied variables included the solution pH and the alloy microstructure (thermal aging). Results show that Alloy 22 is highly resistant to general corrosion in all the solutions tested. Thermal aging is not detrimental and even seems to be slightly beneficial for general corrosion at the higher solution pHs. Pitting corrosion was never observed. Crevice corrosion was found only for high chloride-containing solutions after anodic polarization. The presence of fluoride ions together with chloride ions seems to increase the susceptibility of Alloy 22 to crevice corrosion compared to pure chloride solutions. This article is based on a presentation made in the symposium “Effect of Processing on Materials Properties for Nuclear Waste Disposition,” November 10–11, 2003, at the TMS Fall meeting in Chicago, Illinois, under the joint auspices of the TMS Corrosion and Environmental Effects and Nuclear Materials Committees.     

Generation of Gas Discharge Plasma by an Arc Source with a Cold Hollow Cathode

The results from a study of an arc plasma source with a cold hollow cathode are presented. The source generates plasma with a density of ∼10¹⁰ cm⁻³ in a volume of ∼0.2 m³ at discharge currents of up to 150 A, an arc discharge operating voltage of 30–40 V, and a low pressure of 0.1–1 Pa. The motion of the cathode spot in the crossed electric and magnetic fields inside the hollow cathode and the cathode’s special design make it possible to eliminate almost completely the penetration of the sputtered cathode material into the working vacuum chamber.__________Translated from Pribory i Tekhnika Eksperimenta, No. 3, 2005, pp. 62–66.Original Russian Text Copyright © 2005 by Schanin, Koval, Akhmadeev.