Enhanced upconversion study of Er3+-Yb3+ codoped NaYF4 phosphors synthesized by the reverse microemulsion method

Herein, nanocrystals of Er³⁺ and Er³⁺, Yb³⁺ co-doped NaYF₄ upconversion (UC) phosphor were prepared via the reverse-microemulsion method. The impact of different concentrations of Er³⁺ ions on the UC emission intensity after 980?nm diode laser excitation is discussed. The structure, morphology and composition of the nanophosphors were confirmed by X-ray diffraction, transmission electron microscopy, scanning electron microscopy and the results showed the presence of NaYF₄ nanocrystals with hexagonal phases of NaYF₄. The UC spectra revealed two emission bands including a green and a red emission band and the CIE coordinate for the samples were estimated. The present research revealed that the reverse-microemulsion approach will be suitable for the synthesis of efficient upconversion nanophosphors.     

Effect of a Hydrophilic PEO–PPO–PEO Copolymer on Cetyltrimethyl Ammonium Tosylate Solutions in Water

Cetyltrimethyl ammonium tosylate (CTAT) in water forms long flexible wormlike micelles at concentrations above 10 mM, leading to highly viscous solutions and viscoelastic stiff gels above 100 mM. In the presence of a nonmicellar hydrophilic PEO–PPO–PEO triblock copolymer F87 (TBC-F87, Total mol.wt. = 7,700, EO = 70%) these wormlike micelles RE transformed into smaller structures, as evident from a sharp decrease in viscosity and increase in specific conductance. These results are quantified by small angle neutron scattering (SANS) measurements. The PPO middle block of TBC-F87 gets inserted in the CTAT micelle, the size and total aggregation number of CTAT/TBC-F87 mixed micelles decreased but the number of TBC-F87 molecules in the mixed micelles increased with an increase in [TBC-F87]. Two break points in the typical specific conductance versus CTAT concentration plot at various [TBC-F87] amounts represent interactions between CTAT and TBC-F87. The penetration of PPO of TBC-F87 inside CTAT micelles decreases hydrophobicity of the core while the presence of PEO end blocks enhances hydrophilicity each favoring smaller micelles.     

Synthesis,characterization, and drug release properties of poly(N-isopropylacrylamide) gels prepared in methanol–water cononsolvent medium

Poly(N-isopropylacrylamide) (PNIPAM) hydrogels were simply prepared by free radical polymerization in different methanol–water mixture. A scanning electron microscopy study revealed that the freeze-dried hydrogels were macroporous. The swelling ratios in water at 20°C of the resulting hydrogels followed the order: X_0.43>X_0.21>X_0.76 ≈ X_0.57>X_0.31>X_0.13>X_0.06>X₀, where X_m denotes a gel prepared in a methanol–water mixture with m mole fraction of methanol (x_m). Below the lower critical solution temperature, the swelling ratio values of all of the hydrogels gradually decreased with the increase in the temperature. The complete collapse of the PNIPAM chain of all the gels occurred at about 38°C, whereas the same was observed at about 35°C for the conventional gel prepared in water. The swelling ratio values of all the PNIPAM gels in the methanol–water mixtures with different x_m values at 20°C passed through a minimum in the cononsolvency zone. The deswelling rates of the hydrogels decreased in the following order: X_0.43> X_0.31> X_0.21> X_0.57> X_0.76 ≈ X_0.13> X_0.06> X₀. The reswelling rates of these hydrogels decreased in the following order: X₀> X_0.31> X_0.06 ≈ X_0.13 > X_0.76> X_0.57> X_0.21> X_0.43. The release rates of the Tramadol Hydrochloride drug at 37°C from the drug-loaded hydrogels were almost same for all of the hydrogels. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Enhancement in the limit of detection of lab-on-chip microfluidic devices using functional nanomaterials

Technological developments in recent years have witnessed a paradigm shift towards lab-on-chip devices for various diagnostic applications. Lab-on-chip technology integrates several functions typically performed in a large-scale analytical laboratory on a small-scale platform. These devices are more than the miniaturized versions of conventional analytical and diagnostic techniques. The advances in fabrication techniques, material sciences, surface modification strategies, and their integration with microfluidics and chemical and biological-based detection mechanisms have enormously enhanced the capabilities of these devices. The minuscule sample and reagent requirements, capillary-driven pump-free flows, faster transport phenomena, and ease of integration with various signal readout mechanisms make these platforms apt for use in resource-limited settings, especially in developing and underdeveloped parts of the world. The microfluidic lab-on-a-chip technology offers a promising approach to developing cost-effective and sustainable point-of-care testing applications. Numerous merits of this technology have attracted the attention of researchers to develop low-cost and rapid diagnostic platforms in human healthcare, veterinary medicine, food quality testing, and environmental monitoring. However, one of the major challenges associated with these devices is their limited sensitivity or the limit of detection. The use of functional nanomaterials in lab-on-chip microfluidic devices can improve the limit of detection by enhancing the signal-to-noise ratio, increasing the capture efficiency, and providing capabilities for devising novel detection schemes. This review presents an overview of state-of-the-art techniques for integrating functional nanomaterials with microfluidic devices and discusses the potential applications of these devices in various fields.     

Deep learning-based hybrid reconstruction algorithm for fibre instance segmentation from 3D x-ray tomographic images

3D x-ray tomography is a powerful scanning technique used for generating images of complex fibre structures. A novel machine-learning algorithm to identify and separate individual fibres using 3D images is proposed in this article. The developed four-step hybrid 3D fibre segmentation algorithm involves deep-learning aided semantic segmentation that slices 3D images to create 2D images for fibre extraction, elliptical contour estimation combined with the marker-controlled watershed algorithm for separating fibres from the background area, identifying individual fibres through 3D reconstruction, and, lastly, the 3D object refining approach based on outlier object detection and replacement. The proposed methodology is implemented on a real-time sample of nylon fibre bundle under compression and its 3D x-ray image volume to validate the performance. The results show its superior performance compared to off-the-shelf image processing algorithms in terms of precision, that is, with a validation accuracy greater than 90%, and efficiency, that is, preventing the need for a huge data set and reducing the complexity.     

Effect of Tween-80 on the Control of Particle Size and Shrinkage Properties of Nanoscale α-Alumina Synthesized by Sol–Gel Processing

The concept of tailored interfaces has been applied to the synthesis of nanoscale α-Al₂O₃. Tween-80 (poly-oxyethylene(20) sorbitan monooleate, T-80) was used as a surface modifier in the sol–gel process for this purpose. High-resolution transmission electron microscopy study of the powder obtained with T-80 confirmed the particle size of α-Al₂O₃ (∼55 nm) and morphology (spherical). The exothermic peak temperature in the differential thermal analysis was shifted to a lower temperature (∼917°C) when the powder was derived from a T-80 modifier content of 10 wt%. X-ray diffraction showed that the α-Al₂O₃ phase was the major phase that existed in modifier-derived powder that was sintered at 1000°C. The experiments, based on linear shrinkage, indicated that the powder with T-80 (10 wt%) could be densified at a low temperature.     

Development of halogen‐free flame‐retardant thermoplastic elastomer polymer blend

Ethylene‐propylene diene rubber (EPDM) and isotactic polypropylene (iPP) blends have widest industrial applications that require a degree of flame retardancy. Halogen‐free intumescent technology based on phosphorous salt is a significantly advanced approach to make the polymer flame‐retardant. Both ammonium polyphosphate and ethylenediamine phosphate are important intumescent compounds. Their combination with carbonific and spumific agents were studied in binary blends of EPDM/PP. The polymer system was vulcanized online during melt mixing. Intumescent flame‐retardant polymer systems exhibit good flame‐retardancy with optimum comparable physiomechanical, electrical, and fluid resistance properties, including lower smoke emission, which is essential to protect people because the visibility remains unaffected in the event of fire. Pronounced charring and intumescent effect appear to enhance the flame‐retardancy of the polymers. Possible expected intumescent mechanism is proposed based on the nonpyrolysis mechanism for the flame‐retarded polymer and the intumescent components. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 407–415, 2004     

γ-Tocotrienol as a Promising Countermeasure for Acute Radiation Syndrome: Current Status

The hazard of ionizing radiation exposure due to nuclear accidents or terrorist attacks is ever increasing. Despite decades of research, still, there is a shortage of non-toxic, safe and effective medical countermeasures for radiological and nuclear emergency. To date, the U.S. Food and Drug Administration (U.S. FDA) has approved only two growth factors, Neupogen (granulocyte colony-stimulating factor (G-CSF), filgrastim) and Neulasta (PEGylated G-CSF, pegfilgrastim) for the treatment of hematopoietic acute radiation syndrome (H-ARS) following the Animal Efficacy Rule. Promising radioprotective efficacy results of γ-tocotrienol (GT3; a member of the vitamin E family) in the mouse model encouraged its further evaluation in the nonhuman primate (NHP) model. These studies demonstrated that GT3 significantly aided the recovery of radiation-induced neutropenia and thrombocytopenia compared to the vehicle controls; these results particularly significant after exposure to 5.8 or 6.5 Gray (Gy) whole body γ-irradiation. The stimulatory effect of GT3 on neutrophils and thrombocytes (platelets) was directly and positively correlated with dose; a 75 mg/kg dose was more effective compared to 37.5 mg/kg. GT3 was also effective against 6.5 Gy whole body γ-irradiation for improving neutrophils and thrombocytes. Moreover, a single administration of GT3 without any supportive care was equivalent, in terms of improving hematopoietic recovery, to multiple doses of Neupogen and two doses of Neulasta with full supportive care (including blood products) in the NHP model. GT3 may serve as an ultimate radioprotector for use in humans, particularly for military personnel and first responders. In brief, GT3 is a promising radiation countermeasure that ought to be further developed for U.S. FDA approval for the ARS indication.     

Waste Eggshell-Derived Calcium Oxide and Nanohydroxyapatite Biomaterials for the Preparation of LLDPE Polymer Nanocomposite and Their Thermomechanical Study

Waste eggshells were utilized to make calcium oxide (E-CaO) and hydroxyapatite (E-HAP). E-CaO obtained by heat treatment to eggshells was utilized for the synthesis of E-HAP. Melt compounding of E-CaO/E-HAP was performed with linear low-density polyethylene (LLDPE) on a Brabender Plastograph and ground the obtained formulation for injection molding. Addition of E-CaO/E-HAP in the LLDPE significantly enhanced the flame retardant ability and thermal stability of resultant composites. In the comparative study, E-HAP nanopowder-containing polymer composite showed increment in thermal and mechanical properties than the composite prepared using E-CaO.     

Analysis of the Quaternary Structure of Hemoglobin Beckman Variant and Molecular Interpretation of Its Functional Abnormality: A Mass‐Spectrometry‐Based Approach

Electrostatic attraction between α and β globin chains holds the subunits together in a tetrameric human hemoglobin molecule (α₂β₂). Compared to normal globin chains, the affinity of a mutant chain to its partner globin might be different in genetic variants of hemoglobin. This leads to an unequal abundance of normal and variant hemoglobin in heterozygous samples, even though the rates of synthesis of both the normal and variant chains are the same. The aforementioned affinities across various globin chains might be assessed by quantification of the different forms of the tetramers present in a variant hemoglobin sample. In the present study, by exploiting mass differences between globin chains, differently populated hemoglobin tetramers present in hemoglobin (Hb) Beckman, a β variant (βA135D), were structurally characterized. The relative populations of dissymmetric tetramers (α₂β₂, α₂ββ^V, and α₂β^V₂) indicated that both β and β^V have different affinities towards the α globin chain. Conformational dynamics analyzed from hydrogen/deuterium exchange kinetics of the three peptide fragments of Hb Beckman in its oxy state displayed molecular insight into its functional abnormality. However, in comparison to normal hemoglobin (α₂β₂), the point mutation did not show any change in the collision cross‐sections of the functionally active conformers of the variant hemoglobin molecules (α₂ββ^V and α₂β^V₂).