用边界元法提取VLSI版图电阻

介绍了ＶＬＳＩ版图验证中电阻提取的基本原理和主要方法，给出了一种新颖的基于边界元法的电阻提取算法。该算法采用变节点单元，较好地解决了实际问题中经常出现的角点问题。通过应用该算法对几个实例进行提取，证明使用本文的算法不仅在精度上而且在占用ＣＰＵ时间上都取得了令人满意的效果     

1μm宽硅深槽刻蚀技术

介绍了硅深槽刻蚀的基本原理和影响刻蚀效果的几个主要工艺因素。提出了一种实现１μｍ宽的硅深槽刻蚀工艺途径；并给出了１μｍ宽、８μｍ深、侧壁及底部光洁的硅深槽刻蚀工艺条件。     

全耗尽CMOS／SOI技术的研究进展

ＳＯＩ材料技术的成熟，为功耗低，抗干扰能力强，集成度高，速度快的ＣＭＯＳ／ＳＯＩ器件的研制提供了条件，分析比较了ＣＭＯＳ／ＳＯＩ器件与体硅器件的差异，介绍了国外薄膜全耗尽ＳＯＩ技术的发展和北京大学微电子所的研究成果。     

Microstructure of Pd_(77.5)Au_6Si_(16.5) Alloy Droplet Solidified in a Drop Tube Process

The microstructure development of Pd77.5Au6Si16.5 alloy droplet solidified in a drop tube process was studied. It was found that two distinct microstructures, i.e. (Pd,Au)3Si primary phase and Pd+(Pd,Au)3Si eutectic can be obtained when the droplet diameter is within the range between 2.3~0.4 mm. The morpologies of the (Pd,Au)3Si developed from dendrite trunk-like with single branching only into dendrite cluster-like with ternary branching with the decrease of the droplet diameter. When the droplet diameter is about 0.25 mm, the primary phase (Pd,Au)3Si almost disappears and the microstructure mainly shows Pd+(Pd,Au)3Si eutectic. The morphology of the eutectic transforms from fiber-like to plate-like with the decrease of the droplet diameter in the range between 2.3-0.25 mm. When the droplet diameter is about 0.19 mm, the microstructure is only the single phase of Pd solid solution     

On solving constrained optimization problems with neural networks:a penalty method approach

Deals with the use of neural networks to solve linear and nonlinear programming problems. The dynamics of these networks are analyzed. In particular, the dynamics of the canonical nonlinear programming circuit are analyzed. The circuit is shown to be a gradient system that seeks to minimize an unconstrained energy function that can be viewed as a penalty method approximation of the original problem. Next, the implementations that correspond to the dynamical canonical nonlinear programming circuit are examined. It is shown that the energy function that the system seeks to minimize is different than that of the canonical circuit, due to the saturation limits of op-amps in the circuit. It is also noted that this difference can cause the circuit to converge to a different state than the dynamical canonical circuit. To remedy this problem, a new circuit implementation is proposed.     

垂直平行束状孔爆破模型试验与分析

垂直平行密集束状孔落矿有底柱崩落法是一种新的采矿方法。通过爆破模型试验，测试爆破应力，观察分析爆破效果，探求最佳布孔形式，选择最优爆破孔网参数。试验结果表明：用平行束状孔取代扇形落矿，改善了爆破效果，简化了采场结构，减少了采切工程量。     

激光对光学薄膜损伤的热冲击效应

计算了薄膜在高功率脉冲激光作用下截面温度场和应力场分布。分析了热冲击在光学薄膜激光损伤中的作用，并用调Ｑ１．０６μｍ脉冲激光对ＺｒＯ２单层膜损伤，讨论了不同激光强度下薄膜截面温度场与应力场分布，揭示了热冲击在ＺｒＯ２单层膜损伤中的机理和过程。     

CAD^2B—一个计算机辅助数据库设计系统

本文介绍了一个用Ｔｕｒｂｏ Ｃ语言在ＡＳＴ－２８６机器上实现的计算机辅助数据库设计系统ＣＡＤ＾２Ｂ。该系统提供了人机交互的环境，供设计者进行概念模型设计，并自动完成从概念模型逻辑模型的映射，创建满足规范化要求的关系表。该系统采用的概念模型是引入了事件和时间的扩展了的实体关系模型。该模型既能充分反映应用环境的静态和动态语义，又是向关系模式转化的基础。     

工业产品的艺术造型与技术美学

本文从技术美学的角度，广义的介绍了工业产品艺术造型的基本方法，着重从美学原则和色彩设计两方面论述产品造型设计的手法，以及技术美学在产品造型设计中的基本应用。     

Fracture of Aramid Fiber/Epoxy Resin Micro Composites

Kevlar-49 fiber was modified through cold air plasma treatment and plasma grafting with acrylic monomers. Fracture of aramid fiber/epoxy resin micro composites has been studied by means of single fiber pull-out test. Tow types of pull-out curves are correlated with the different failure modes. A polyacrylic acid-co-ethyl acrylate graft layer can improve the adhesion and protect the fiber from damage caused by interfacial stresses.