如何将党建工作贯穿于企业的生产经营管理之中

党建和思想政治工作只有贯穿于企业的生产经营管理之中,实现两者的无缝对接,才能使党建工作充满活力,起到保驾护航的作用。本文围绕这一论题展开了阐述,提出了解决问题的办法,为提高企业生产经营管理水平进行了有益的尝试。     

Bone Tissue Response to the Bone-like Tissue Coating on Titanium

The objective of this study was to investigate the effects of mineralized bone nodules, formed in vitro by bone marrow stromal cells(BMSCs), on the new bone formation in bone defect and on implant surface. The mineralized bone nodules were generated by culture of Lewis rats BMSCs on titanium disks in osteogenic induction medium. The gap-healing animal model was used to create the bone defect facing the disk. The titanium disks in the presence of B group or in the absence of NB group bone nodules were randomly placed into one of the rat distal femurs. This self-control design was used to compare the bone formation in defects and on titanium surface, by Micro-CT, fluorescence staining, histological and histomorphometric analysis. The new bone formation parameters in bone defect area of B group were significantly higher than those of NB group at 2 weeks, including bone volume fraction, trabecular thickness and bone area ratio. The bone nodules pre-stained with Alizarin red disappeared mostly at 2 weeks, while the red fluorescence reappeared in the newly formed bone away from the disk surface. For the bone-implant contact, B group showed lower values than NB group at 2 weeks, but no significant difference was found at 4 weeks. Our results indicate that the mineralized bone nodules can be resorbed in vivo and promote the early osteogenesis in the bone defects, and bone nodules may be applicable for new bone generation in bone defect or modification of tissue engineering scaffold.     

THE IONIZATION THEORY OF DESULPHURIZATION WITH THE BLAST-FURNACE-TYPE SLAGS

根据新提出的碱度指标,对低碱度高炉型渣的离子结构作了假定。利用前文提出的、适用于各种碱性炼钢型渣的硫分配比公式: (％S)/[％S]=32L_Sf_S/γ_(Fe~(2+))γ_(S~(2-))·(∑n+∑n-)/n_(FeO)对Hatch和Chipman,Taylor和Stobo以及等的饱和碳铁液和高炉型渣平衡实验数据进行处理分析,得出: Igγ_(Fe~(2+))γ_(S~(2-))=-53.5 N_(O~(2-))+2.12。进一步计算证明了该硫分配比公式也适用于一般的低碱度渣。对碱性炼钢型渣适用的、关于FeO含量对脱硫作用的规律证明了也适用于低碱度渣。将f_S与(％S)/[％S]合并考虑,则(％S)/α_S基本上不受温度和铁液成分的影响。     

卧式加工中心试验模态分析

应用变时基采样的锤击法对卧式加工中心进行了试验模态分析，研究了该加工中心的动态特性，获得了感兴趣低频段的加工中心低阶固有频率。通过对整机各阶模态振型的分析，找到了加工中心结构的薄弱环节，为进行结构的优化设计指出了改进的方向。     

国内外不锈钢精炼剂研究发展现状

分析了精炼剂组元元素的作用能力，讨论并总结了精炼剂组元的复合作用，介绍了几种国内、国外精炼剂产品，提出发展高效复合精炼剂的想法。     

Formation and thermal stability of amorphous Ni-Mo-P alloys

The experimental researches on the chemical deposition of Ni-Mo-P amorphous alloys were carried out by adding Na2 MoO4 into acidic solutions. The optimum technology conditions were obtained by orthogonal design experiments. The structures and the relationship between compositions and their thermal stability were studied by energy spectrum (EC), scanning electron micrograph and X-ray diffraction spectrum. Compared with Ni-P amorphous alloys, the Ni-Mo-P amorphous alloys have high crystallization temperature and thermal stability, and the hardness reaches its peak when the annealing temperature is 500 ℃. With the increase of the heat treatment temperature, the surface morphology of the alloys changes.     

Preparation and characterization of GaN films grown on Ga-diffused Si （111） substrates

Hexagonal GaN films were prepared by nitriding Ga2O3 films with flowing ammonia. Ga2O3 films were deposited on Ga-diffused Si (111) substrates by radio frequency (r.f.) magnetron sputtering. This paper have investigated the change of structural properties of GaN films nitrided in NH3 atmosphere at the temperatures of 850, 900, and 950℃ for 15 min and nitrided at the temperature of 900℃ for 10, 15, and 20 rain, respectively. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) were used to analyze the structure, surface morphology and composition of synthesized samples. The results reveal that the as-grown films are polycrystalline GaN with hexagonal wurtzite structure and GaN films with the highest crystal quality can be obtained when nitrided at 900℃ for 15 min.     

高钒高速钢碳化钒形态的数值化分析

针对碳化钒的不同形态,设计出定量分析软件,并利用形状因子K,实现了高钒高速钢不同碳化物形态数值化处理,当K介于0.785～1.000之间碳化钒形态为团球状;K≤0.223,碳化钒呈开花状.高钒高速钢当碳含量达到4.2%时,K为0.86和当量直径D为0.78μm,碳化物呈团球状均匀分布.     

CA6140车床数控改造中机械装置设计技巧

介绍了普通车床数控改造中机械装置的几个独特设计，使得数控车床纵向进给系统结构更简单、性能更可靠、装拆更方便。     

逆变电源的可靠性及其提高途径

影响逆变焊接电源可靠性的因素是多方面的.如产品的设计和生产等各个环节.根据实践经验提出了解决可靠性问题的一些有效途径和方法.