SRTM数据在重力勘探中的分析和应用

SRTM数据具有统一的基准和精度以及可计算性等特点，应用于重力勘探项目的投标报价、工期预测、工区踏勘、设计编写、生产安排、人员调度及风险评估等方面，能提高生产效率和节约成本。本文对具体实测的SRTM数据进行了对比和分析，并结合OziExplorer和GlobalMapper网络公开软件，介绍了该数据在实际生产中的应用。     

氮气氛下LTCC基板Cu共烧金属化研究

从PMMA型LTCC素坯膜的制备和PMMA的排胶机理两方面，研究了LTCC基板Cu共烧金属化。结果表明，采用PMMA作为粘结剂的流延浆料具有剪切变稀行为，所得的流延坯膜微观组织均匀，叠压后坯体内部无分层现象。热失重、差热和傅立叶红外光谱联用分析结果表明高纯N2气氛中PMMA以解聚机理热解，热解后释放的主要产物为丙烯酸甲酯。在高纯N2气氛中LTCC与Cu共烧后Cu金属化膜平整、致密，连通良好。经测试，基板表面Cu导体方阻小于5mΩ/□。     

修井机多桥间转向传动机构的设计

对于大型修井机采用的重型底盘,多桥转向系统是底盘开发中的关键技术之一。在分析目前修井机采用的转向传动结构(方案1)存在问题的基础上,参照军用车底盘的应用案例又提出了2种方案,经对比分析,确定了最佳的传动机构新方案,并根据多桥转向理论和四连杆机构的几何关系对该机构进行了参数确定。通过实际应用,证明该转向传动布置方案具有传动误差小、不产生附加转向、现场调节安装方便、易于组织生产等特点。     

KINETICS OF HYDROCARBON GAS GENERATION FROM MARINE KEROGEN AND OIL: IMPLICATIONS FOR THE ORIGIN OF NATURAL GASES IN THE HETIANHE GASFIELD, TARIM BASIN, NW CHINA

In this paper we derive kinetic parameters for the generation of gaseous hydrocarbons (C_1‐5) and methane (C₁) from closed‐system laboratory pyrolysis of selected samples of marine kerogen and oil from the SW Tarim Basin. The activation energy distributions for the generation of both C_1‐5 (Ea = 59‐72kcal, A = 1.0×10¹⁴ s^?1) and C₁ (Ea = 61‐78kcal, A = 6.06×10¹⁴ s^?1) hydrocarbons from the marine oil are narrower than those for the generation of these hydrocarbons from marine kerogen (Ea = 50‐74kcal, A = 1.0×10¹⁴ s^?1 for C_1‐5; and Ea = 48‐72kcal, A=3.9×10¹³ s^?1 for C₁, respectively). Using these kinetic parameters, both the yields and timings of C_1‐5 and C₁ hydrocarbons generated from Cambrian source rocks and from in‐reservoir cracking of oil in Ordovician strata were predicted for selected wells along a north‐south profile in the SW of the basin. Thermodynamic conditions for the cracking of oil and kerogen were modelled within the context of the geological framework. It is suggested that marine kerogen began to crack at temperatures of around 120°C (or 0.8 %Ro) and entered the gas window at 138°C (or 1.05 %Ro); whereas the marine oil began to crack at about 140 °C (or 1.1 %Ro) and entered the gas window at 158 °C (or 1.6%Ro). The main geological controls identified for gas accumulations in the Bachu Arch (Southwest Depression, SW Tarim Basin) include the remaining gas potential following Caledonian uplift; oil trapping and preservation in basal Ordovician strata; the extent of breaching of Ordovician reservoirs; and whether reservoir burial depths are sufficiently deep for oil cracking to have occurred. In the Maigaiti Slope and Southwest Depression, the timing of gas generation was later than that in the Bachu Arch, with much higher yields and generation rates, and hence better prospects for gas exploration. It appears from the gas generation kinetics that the primary source for the gases in the Hetianhe gasfield was the Southwest Depression.     

非平衡等离子体协同作用光催化剂催化降解苯

采用非平衡等离子体与光催化剂相结合,对苯的降解进行了实验研究。考察了以不同吸附能力的玻璃球和γ-Al2O3为载体对苯降解率、碳平衡、CO2选择性、NOx及O3生成量的影响;研究了以γ-Al2O3为载体时,水蒸气含量对苯的降解率、碳平衡、CO2选择性、NOx及O3生成量的影响。实验结果表明,以具有吸附性的γ-Al2O3为载体可提高苯的降解率;当能量密度为618J/L时,苯的降解率可达98%;同时可降低O3的生成量,但NOx生成量增加;以γ-Al2O3为载体时,随水蒸气含量的增加,苯的降解率降低,特别是在低能量密度时,水蒸气对苯降解率的影响更为显著,但水蒸气的加入可抑制O3的生成,同时可提高碳平衡值。     

High-frequency surface field excited by a magnetic line source on an impedance cylinder

The evaluation of the transverse electric (TE) surface field on an impedance boundary circular cylinder, excited by a magnetic current on the same surface is discussed. The source is of infinite axial extent. The integral which describes the field due to a single surface ray is evaluated numerically and asymptotically. The results compare well with each other as well as with the eigenfunction solution. The surface ray field has a uniform representation in the sense that it remains valid in the immediate vicinity of the infinitesimal source as well as in the deep shadow region. A comparison is made with a flat impedance plane to indicate the influence of curvature on the surface field.     

乙二醇合成工艺的研究进展

对国内外乙二醇合成的传统工艺:直接水合法、催化水合法和碳酸乙烯酯法进行了介绍;对乙二醇合成的新工艺,包括乙二醇和碳酸二甲酯联产法和C1化学法的工艺流程和发展前景进行了综述,其中,C1化学法主要分为乙烯合成法、合成气合成法和甲醛、甲醇合成法。作为合成气合成法之一的合成气偶联合成法,具有工艺要求不高、反应条件温和等优点,是目前最有希望大规模工业化生产乙二醇的工艺路线。     

Degradation Behaviors of Metal-Induced Laterally Crystallized n-Type Polycrystalline Silicon Thin-Film Transistors Under DC Bias Stresses

Device degradation behaviors of typical-sized n-type metal-induced laterally crystallized polycrystalline silicon thin-film transistors were investigated in detail under two kinds of dc bias stresses: hot-carrier (HC) stress and self-heating (SH) stress. Under HC stress, device degradation is the consequence of HC induced defect generation locally at the drain side. Under a unified model that postulates, the establishment of a potential barrier at the drain side due to carrier transport near trap states, device degradation behavior such as asymmetric on current recovery and threshold voltage degradation can be understood. Under SH stress, a general degradation in subthreshold characteristic was observed. Device degradation is the consequence of deep state generation along the entire channel. Device degradation behaviors were compared in low V_d-stress and in high V_d-stress condition. Defect generation distribution along the channel appears to be different in two cases. In both cases of SH degradation, asymmetric on current recovery was observed. This observation, when in low V_d-stress condition, is tentatively explained by dehydrogenation (hydrogenation) effect at the drain (source) side during stress     

奥氏体耐热钢21-4N碳化物析出行为研究

通过对奥氏体耐热钢21-4N碳化物析出行为的研究,探讨了对性能的影响,提出了改善其综合性能的措施和方法.