35kV变压器故障气相色谱分析

对于运行中的变压器,气相色谱分析法可实现其内部故障的诊断,并提供有效的运维建议.应用气相色谱分析法分析一起35 kV变压器故障,为气相色谱分析法的进一步推广应用提供有力的技术支撑.     

Characterization of ultrafine La x Sr1−x MnO3 powder prepared by spray pyrolysis

The characterization of La _x Sr_1−x MnO₃ powders produced by spray pyrolysis using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observation, specific surface area (Brunauer-Emett-Teller), and particle size distribution measurements shows that the resultant large particles are loose agglomerates consisting of many small particles. However, the sintered tiny particles can form hard agglomerates, and the particle size increases remarkably. The structures of the powders before and after sintering were identified by x-ray diffraction (XRD). The study of the electrical property of the powder shows that the powder is a metallic conductor. In a reducing atmosphere, the powder can be decomposed. When the powder is cofired with yttria-stabilized zirconia 5% (YSZ) powder at 1200 °C for 5 h, no new phase is produced, and the powder remains a single provskite hexagonal-rhombohedral structure.     

注射模分型面设计中靠破孔的研究

针对应用Pro／E软件进行注射模分型面设计中出现的靠破孔问题，以阿尔卡特的OT535手机为例，归纳总结了设计分型面时填补破孔的基本思路和主要方法，解决了分型面设计中的关键问题。     

并捻器成型工艺及模具设计

在仔细分析并捻器零件工艺特点的基础上 ,设计制造了并捻器压铸模 ,针对压铸过程中遇到的问题对模具进行了改进 ,并对铝合金原材料和铝合金的熔炼过程进行了重点控制 ,取得了良好的效果。     

Strengthening technology and mechanism for semi-solid die casting of aluminum alloy

Combined with theoretical evaluation,an optimized strengthening process for the semi-solid die castings of A356 aluminum alloy was obtained by studying the mechanical properties of castings solution treated and aged under different conditions in detail,then,the semi-solid die castings and liquid die castings were heat treated with the optimized process.The results show that the mechanical properties of semi-solid die castings of aluminum alloy are superior to those of the liquid die castings,especially the strengthening degree of heat treated semi-solid die castingsis much greater than that of liquid die castings with the tensile strength more than 330 MPa and the elongation more than 10％,and this is mainly contributed to the non-dendritic and more compact microstructure of semi-solid die castings.The strengthening mechanism of heat treatment for the semi-solid die castings of A356 aluminum alloy is due to the dispersive precipitation of the second phase(Mg2 Si) and formation of GP Zone.     

基于支持向量机的旋转机组状态趋势预示技术

本文主要介绍了支持向量机在旋转机组状态趋势预示中的运用。通过对某旋转机组的振动烈度进行预测,并将其结果与使用时间序列进行预测的结果相比较,发现使用支持向量机进行预测的结果更好。     

Effect of surface free energy on the adhesion of biofouling and crystalline fouling

Pipelines and heat exchangers using seawater as coolant suffer from biofouling. Biofouling not only reduces heat transfer performance significantly, but also causes considerable pressure drop, calling for higher pumping requirements. It would be much more desirable if surfaces with an inherently lower stickability for biofouling could be developed. In this paper, a cost-effective autocatalytic graded Ni-Cu-P-PTFE composite coating with corrosion-resistant properties was applied to reduce biofouling formation. The experimental results showed that the surface free energy of the Ni-Cu-P-PTFE coatings, which were altered by changing the PTFE content in the coatings, had a significant influence on the adhesion of microbial and mineral deposits. The Ni-Cu-P-PTFE coatings with defined surface free energy reduced the adhesion of these deposits significantly. The anti-bacterial mechanism of the composite coatings was explained with the extended DLVO theory.     

百菌清及其三氟衍生物对番茄早疫病菌的室内抑菌活性比较

采用生长速率法测定了不同浓度的百菌清及其三氟衍生物对番茄早疫病菌Alternaria solani(Ell,et Mart.)Jones es Gmut的室内杀菌毒力。试验结果表明，百菌清及其三氟衍生物的ED50值分别为6089．89mg／L和156．43mg/L。，前者是后者的38．93倍。百菌清三氟衍生物的毒力明显高于百菌清。     

钛合金叶片隔热烘漆的研制

以双酚A型环氧树脂为主要成膜物质,以氮化硼为功能填料,以丁醇醚化脲醛树脂为固化剂,并添加己二酸聚酯弹性体树脂改善其柔韧性、提高涂膜的机械性能,最终得到附着力强、耐热性好、隔热作用明显的飞机发动机叶片用防护涂料.