扎鲁特盆地的大地电磁电阻率结构成像初步结果（英文）

为揭露扎鲁特盆地构造格架和识别二叠纪林西组地层分布特征,笔者在扎鲁特盆地进行重力、磁力、大地电磁综合地球物理调查。在2012年,采集了5条北西向大地电磁剖面。经过数据处理、分析后,反演后电阻率断面揭露了断层带和林西组分布特征。扎鲁特盆地西部边界被确定。发现了两个低阻带,推测它们可能是与页岩气有关的泥岩。这些工作将为扎鲁特盆地页岩气潜力评价提供依据。     

带激光反射镜重要设备轴线方位角测量方法的探讨

随着我国国民经济的快速发展,各项重大工程项目不断开展,测量在工程项目建设的地位重要性越来越强,经常会遇到很多涉及到重要工程的高精度测量,特别是受工程与项目环境的约束,采用常规的作业方法受到局限,如何采用最优最可靠的方法是测绘服务国民经济需要研究的问题,在可重复验证满足测量精度的同时,需要对独立的工程项目进行专项测量技术设计,以此来满足工程独特的技术与精度要求;本文探讨对某重要激光反射设备进行激光反射镜反射的不可见短轴轴线方位进行测量,由于受设备环境影响,激光镜面可见,垂直镜面反射的激光轴线在设备内不可见也不可延长,如何高精度的测量激光轴线方位是设备安装后调试的关键。     

离子选择电极在水土流失养分监测中的应用

水土流失径流养分监测通常采用野外采集后进行实验室分析的方法,操作复杂。为验证离子选择电极这种可快速测量养分的方法在水土流失监测中的可靠性,以氨氮离子选择电极为例,与传统纳氏试剂分光光度法进行比较,在准确度、抗离子干扰及坡面径流迁移规律等方面进行实验。结果表明:电极法测定范围最大值为1000 mg/L,分光光度法测定范围最大值为2 mg/L;用幂函数模型模拟坡面径流氨氮迁移规律时,电极法测定值的拟合系数为0.9537,分光光度法的为0.9305。在95%的置信水平上,两方法结果并无显著性差异,而电极法的标准偏差小,其结果更接近标准值。     

基于System Generator的内插位同步法

针对数字接收机中如何全数字地实现位同步,设计了一种内插位同步法。利用内插与Gardner算法相结合的原理设计位同步,通过System Generator进行建模仿真,并直接生成代码下载到FPGA实现位同步。利用QPSK信号进行仿真分析,FPGA硬件协同仿真进行验证。实验结果表明,内插位同步法具有很好的位同步效果。     

神龙城投资的分析与预测模型及推广

为了反映不同因素对湖南省株洲市神龙城商业圈发展的影响,将人口数量、居民人均可支配收入和商业区的住房成本作为商业圈发展的主要影响因素,并运用层次分析法判断该城市房价的合理性。进一步利用回归分析法,将3个影响因素作为变量,通过商业圈房价的未来走势来预测神龙城商业圈未来的发展。最后借助Matlab软件和有关数据对模型进行了检验,发现预测结果与实际结果比较吻合,有一定的通用性。     

混配柴油凝点及溶解度参数的分子模拟研究

石化柴油中添加少量生物柴油调配混配柴油是当前研究的一个热点.分别用单组分、3组分和5组分正构烷烃构建石化柴油模拟系统,以亚油酸甲酯（ML）构建单组份生物柴油模拟系统.按2％、4％、6％、8％和10％物质的量比添加ML于石化柴油模拟系统中构建不同比例的混配柴油系统.利用分子动力学方法对各种系统的凝点区间及溶解度参数进行了模拟计算.利用热容等4个性质联合判断出各系统的模拟凝点区间,发现,随着ML的添加,系统的凝点总体呈下降趋势,说明生物柴油确具有明显的降凝效果,添加生物柴油可以使柴油的低温流动性增加.相比较而言,采用3组分正构烷烃构建石化模拟系统更为合适.通过对293 K时3组分石化柴油系统添加不同比例的ML构成的混配柴油系统的溶解度参数进行分析,得出了当添加比例为4％时两种油品的相容性最佳的结论.     

Mo、Ni含量与Ti(C,N)基金属陶瓷组织和性能之间的关系

本文研究了Mo、Ni含量对Ti（C，N）基金属陶瓷组织和性能的影响．结果表明，Mo、Ni含量对组织和性能有很大影响，化学成分决定了组织和性能．     

High efficient separation of olefin from fluid catalytic cracking naphtha: Separation mechanism and universal simulation method

The fluid catalytic cracking (FCC) naphtha critical component-oriented separation process is an efficient method to produce ultra-low-sulfur (<10 μg/g) gasoline with minimal loss of octane number (<1 RON). However, the product quality is highly dependent on the structure of the components of FCC naphtha. Aromatics and thiophene sulfides without a methyl side chain favor the separation of olefin. The major impulse of olefin separation is the solvent-induced dipole of aromatics or thiophene sulfides, leading to a “Plane-to-Plane” combination between the solvent and aromatics or thiophene sulfides, accompanied by a steric hindrance due to their side chains. This condition resulted in 2–3 times greater θ of benzene and thiophene compared with that of toluene and 3-methylthiophene. In addition, an improved non-random two-liquid model was proposed based on the above results, and a simulation method for FCC naphtha solvent extraction process was established. The calculation results accorded well with industry data.     

Electromagnetic wave absorbing properties of Cr2AlB2 powders and the effect of high-temperature oxidation

The electromagnetic (EM) wave absorbing properties of Cr₂AlB₂ powders and those after high-temperature oxidation were investigated. Coupling of magnetic and dielectric loss enables Cr₂AlB₂ with good absorption properties. The minimum reflection loss (RL) value is −44.9 dB at 8.5 GHz with a thickness of 2.7 mm, and the optimized effective absorption bandwidth (E_AB) is 4.4 GHz (13.0-17.4 GHz) with a thickness of 1.6 mm. After oxidation at 750, 900, and 1000°C for 2 h, the minimum RL values, respectively, are −23.9 dB (17.5 GHz, 1.5 mm), −41.4 dB (16.5 GHz, 1.5 mm), and −39.5 dB (8.0 GHz, 3.0 mm); and the corresponding E_AB values, respectively, are 3.8 GHz (13.6-17.4 GHz, 1.7 mm), 4.1 GHz (13.5-17.6 GHz, 1.6 mm), and 4.4 GHz (13.0-17.4 GHz, 1.7 mm). With an absorber thickness of 1.5-4.0 mm, the E_AB with a RL value of less than −10 dB can be tuned in a broad-frequency range 5.0-18.0 GHz, which basically covers C (4-8 GHz), X (8-12 GHz), and Ku (12-18 GHz) bands. These results demonstrate that Cr₂AlB₂, as a high-efficient and oxidation-resistant absorber, is a promising candidate for microwave absorption applications and can retain good EM wave absorbing properties after high-temperature oxidation.     

Surface plasmon resonance-induced Ag-BaTiO3 composites for catalytic performance

Ferroelectric BaTiO₃ was combined with Ag nanoparticles for piezocatalytic and photocatalytic viewpoints. Microstructural characterization (X-ray diffraction and electron microscopy images) revealed that the Ag was successfully bounded with BaTiO₃. X-ray photoelectron spectrum also confirmed the presence of Ag. Further, its performance was examined for dye degradation under visible light (for photocatalysis) and ultrasonication (for piezocatalysis). In both the catalysis processes, there was a significant improvement in Ag-loaded BaTiO₃ sample-based catalytic reactions. Catalytic performance was evaluated for multiple cycles and was found consistent. Scavenger tests were also performed to understand catalytic reactions.