Precision winding of fiber optic filament. II. Winding control

For pt.I see ibid., vol.39, no.3, p.258-67 (1992). The winding of fiber optic filament in the hoop, or precision, pattern is considered. Various automatic control options that have been designed and tested are described. The controllers are designed to regulate the fiber lag angle, which is the angle at which the feed filament approaches the take-up spool. Successful, flawless winding is directly related to accurate lag regulation. The contributions are distinguished by the fact that the automatic winding rate is 10 to 30 times greater than that achieved before by operator-assisted winding     

Reconfigurable arrays by phase-only control

Due to space or cost reasons, a single array antenna can be required to radiate more than one pattern, each pattern being selected by an electronic control, in which only the phase can be modified. A synthesis method for such a problem that is able to determine both the common amplitude and the various phases in an integrated way is presented. Moreover, the approach is flexible enough to take into account additional constraints and allows an efficient implementation. Some test cases showing the effectiveness of the method are presented     

Effects of measurement errors on microwave antenna holography

The effects of measurement errors appearing during the implementation of the microwave holographic technique are investigated in detail, and many representative results are presented based on computer simulations. The numerical results are tailored for cases applicable to the utilization of the holographic technique for the NASA's Deep Space Network antennas, although the methodology of analysis is applicable to any antenna. Many system measurement topics are presented and summarized     

Autonomous system expansion planning considering renewable energysources-a computer package

The authors describe the interactive package ASP (Autonomous System Planning), which determines the optimal expansion plan of an autonomous generation system including diesel units, wind generators, and photovoltaic generators. Utilizing meteorological data, load demand data and estimated economical parameters, the package finds the optimal system expansion policy for a period of N years. The solution algorithms implemented in the package recognize planning and operational constraints and take into consideration the stochastic nature of the meteorological conditions, loads, and the availability of the diesel units     

Methods to assess physical activity with special reference tomotion sensors and accelerometers

Motion sensors may be applied for the assessment of physical activity. This paper reviews the evolution of these instruments from the mechanical pedometer to the electronic accelerometer. We conclude that for accurate assessment of physical activity under free living conditions the recently introduced accelerometer looks most promising, although little information was available regarding the reliability of these instruments. Subsequently, reliability of an accelerometer with a three-directional sensor was examined. Intrainstrument variation in a bench test was less than 8% during four measurements over a week. Interinstrument variation during treadmill experiments while subjects wore two accelerometers at the same time was on average 22% and was not improved after adjustment for differences found in the bench test. Reproducibility in the treadmill experiment was approximately 76, 85, and 95% at 3, 5, and 7 km/h, respectively. Bench testing revealed that the sensitivity of a piezoelectric element is prone to shifts, probably due to mechanical, electromagnetic, and/or temperature shock, which may be encountered during outdoor application. However, the relevance of the bench test in this study may be questioned, as results did not correspond with the findings in subjects. This needs further investigation.     

Contact resistance for small contacts [MOSFET]

An asymptotic analysis for current flow to small contacts in MOSFET source/drain regions is obtained. The formula for end resistance is compared with numerical simulations. It shows good agreement for contacts whose width is smaller than half the diffusion width     

PROGRESS IN THE MODELLING OF AIR FLOW PATTERNS IN TIMBER KILNS

Progress in modelling air flow patterns in timber kilns using Computational Fluid Dynamics is reviewed in this work. These simulations are intended to predict the distribution of the flow in the fillet spaces between boards in a hydraulic model of a timber kiln. Here, the flow regime between the boards is transitional between laminar and turbulent flow, with Reynolds numbers of the order of 5000. Running the simulation as a transient calculation has shown few problems with convergence issues, reaching a mass residual of 0.2% of the total inflow after 40-100 iterations per time step for time steps of 0.01 s. Grid sensitivity studies have shown that non-uniform grids are necessary because of the sudden changes in flow cross section, and the flow simulations are insensitive to grid refinement for non-uniform grids with more than 300,000 cells. The best agreement between the experimentally-measured flow distributions between fillet spaces and those predicted by the simulation have been achieved for (effective) bulk viscosities between the laminar viscosity for water and ten times that value. This change in viscosity is not very large (less than an order of magnitude), given that effective turbulent viscosities are typically several orders of magnitude greater than laminar ones. This result is consistent with the transitional flows here.     

High-frequency performance of submicrometer channel-length siliconMOSFETs

Polycide-gate silicon n-channel MOSFETs were fabricated on the basis of a standard 0.5-μm MOS technology and measured over the 1.5-26.5-GHz frequency range, in order to investigate the effects of channel-length reduction on device behavior at high frequency. Excellent microwave performances were obtained with a maximum operating frequency (f_max) and a unity-current-gain frequency f _t near 20 GHz for 0.5-μm-gate-length NMOS devices. An equivalent circuit for a MOSFET with its parasitic elements was extracted from measured S-parameter data. The influence of gate resistance, gate-to-drain overlap capacitance, substrate conductivity, and the transit-time effect between the source and drain on microwave characteristics was analyzed