后桥壳的可靠性优化设计

该文讨论了后桥壳的可靠性优化设计问题.在基本随机变量的概率特性已知的情况下,应用随机摄动法和约束随机方向法对后桥壳进行可靠性优化设计,并编制了实用的计算机程序,可以迅速准确地得到后桥壳的可靠性设计参数.     

DNA/lipid complex organogel with shape‐memory behavior

DNA and amphiphilic N,N,N‐trimethyl‐N‐hexadecylammonium bromide (THAB) were stoichiometrically mixed together to produce a DNA–lipid complex, which was dissolved in dimethyl sulfoxide (DMSO) at 65°C and then crosslinked with isophorone diisocyanate (IPDI). The obtained organogel swelled reversibly in DMSO, responding to the variation of temperature. Interestingly, we observed that the gel exhibited a temperature‐dependent shape‐memory behavior. Above 65°C, whatever the shape the gel was deformed to, it could retain the new shape as the temperature was decreased to room temperature, while, when the gel was heated to 65°C again, it could recover its initial shape. The shape‐memory characteristic is supposedly originated from the transition between the close‐packed and the destroyed DNA/lipid conformation. The elastic urethane crosslinking bonds between base‐pair sites act as a fixing phase. The gel holds promise in its application as a gentle actuator. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 259–263, 2002     

长脉冲激光沉积原位生成YBaCuO超导膜

用长脉冲激光(脉冲宽度150μs,波长1.06μm)辐照高温烧结的YBa_2Cu_3O_(7-x)靶,在6Pa的氧气压强下,巳在(100)YSZ单晶衬底上原位生成YBa_2Cu_(?)O_(7-x)超导膜。衬底置于750℃的加热器上,衬底与靶之间的距离5cm,用该法制得的薄膜光亮坚实,正常态呈金属性,零电阻温度为84.7K。用XRD和SEM对薄膜进行了分析研究。     

A new kind of compound solid-state quasi-optical power combiner

In this paper, a new kind of solid-state quasi-optical power combiner is presented. It consists of two or more singlecavity multiple-device power combiners and a Fabry-Perot cavity. The experimenal results using six Gunn diodes at X-band show that the total output power is higher than 400 mW, the total combining efficiency is as high as 83%, and the frequency stability is better than 10^?5.     

交点计算的几种方法

在工程测量中，经常涉及到交点计算，如何运用现有的工具快速地计算出交点非常重要。本文介绍了利用控制器、AutoCAD绘图软件和Excel计算交点的方法，供大家参考。     

用离子束混合及快速热处理方法形成钽的硅化物

本文描述用离子束透过钽金属膜进行混合和快速热处理方法来形成钽的硅化物.用溅射方法在P型硅衬底上淀积一层金属钽,然后用砷离子束透过钽金属模进行混合,采用快速热处理后形成了平整的硅化钽薄层.使用厚度为500埃的钽金属膜,得到钽的硅化物薄层电阻为5.5Ω/□.研究了砷离子能量、剂量及钽膜厚度对钽的硅化物薄层电阻的影响.用透射电镜和台阶仪对所形成的硅化钽进行了分析和厚度测量.     

动情期家兔输卵管上皮及其分泌活动的电镜观察

本实验用透射电镜和扫描电镜观察了动情期家兔输卵管上皮。证实分泌细胞和纤毛细胞都有分泌功能，共分泌三种分泌物质。本文对这些分泌物质的分泌方式、分泌活动进行了研究和探讨。另外，发现上皮基膜下方始终有一层成纤维细胞形成的胞质膜伴行，据此，对血一输卵管腔屏障的构成亦进行了讨论。     

非晶Sm5Fe74.3Nb1.5Si11.7B4.5C2.5Cu0.5合金经预退火后的晶化动力学的DTA研究

研究了非晶Sm5Fe74.3Nb1.5Si11.7B4.5C2.5Cu0.5合金经400℃，保温10min预退火后的晶化动力学。结果表明；该合金的晶化相为α-Fe固溶体和Sm2Fe17Cx金属间化合物，两相的晶化表观激活能分别为557KJ/mol和514KJ/mol，当晶化体积分数为60%时，α-Fe相的晶化激活能达极大值；Sm2Fe17Cx相晶化激活能则随其晶化体积分数的增加而逐渐减小。     

GENERATION OF NONLINEAR INTERNAL WAVES ON CONTINENTAL SHELF

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＩｎｔｅｒｎａｌｔｉｄａｌｉｎｔｅｒａｃｔｉｏｎｗｉｔｈｂｏｔｔｏｍｆｅａｔｕｒｅｓａｐｐｅａｒｓｔｏｂｅｔｈｅｄｏｍｉｎａｎｔｍｅｃｈａｎｉｓｍｆｏｒｇｅｎｅｒａ ｔｉｏｎｏｆｔｈｅｃｏｈｅｒｅｎｔｏｃｅａｎｉｃｉｎｔｅｒｎａｌｗａｖｅｓｔｈａｔａｒｅｏｂｓｅｒｖａｂｌｅｗｉｔｈＳＡＲ ,ｃｌｏｓｅｒｔｏｓｈｏｒｅ ,ｒｉｖｅｒｉｎｅｏｒｇｌａｃｉａｌｉｎｔｒｕｓｉｏｎａｎｄｃｏｎｔｉｎｅｎｔａｌｂｒｅａｋｐｒｏｖｉｄｅｓｅｃ ｏｎｄａｒｙｇｅｎｅｒａｔｉｎｇｍｅｃｈａ…