AKIMA方法在EXAFS谱解析中的应用

解析扩展Ｘ射线吸收精细结构谱（ＴｈｅＥｘｔｅｎｄｅｄＸ－ｒａｙＡｂｓｏｒｐｔｉｏｎＦｉｎｅＳｔｒｕｃｔｕｒｅＥＸＡＦＳ）的一种方法是曲线拟合，在曲线拟合中，能量阈值Ｅ０的确定有着很重要的意义，同时也有相当的难度，本文应用ＡＫＩＭＡ平滑数据点方法达到了对Ｅ０在数学意义上的精确求解，数据分析结果表明，这种方处理结果是令人满意的。     

A sequencing problem for a mixed-model assembly line in a JIT production system

In an assembly line of a just-in-time (JIT) production system, workers have the power and the responsibility to stop the line when they fail to complete their operations within their work zones. This paper deals with a sequencing problem for the mixed-model assembly conveyor line in the JIT production system. In some environment, the most important criterion is the line stoppage rather than the variation of production rates. The problem is to find an optimal sequence of units that minimizes the total line stoppage time. Lower and upper bounds of the total line stoppage time are derived and the branch-and-bound method is applied to the problem. A numerical example is given.     

气体动压轴承动态参数测定原理

将气体动压轴压简化为转化气膜系统后，针对其动力特点，给出气膜在微幅振动下动压轴承的实用数学模型和测定动态参数的方法，并进行了测量误差的修正。     

基于LVDS技术的高速数据传输系统设计

串行传输技术具有更高的传输速率和更低的设计成本,被广泛应用于高速通信领域;研究了一种基于FPGA的LVDS高速数据传输系统方案,该方案以Altera FPGA芯片为核心,通过其LVDS I/O口稳定可靠地完成数据传输,系统采用Verilog语言完成8B/10B编解码、时钟数据恢复、CRC校验、字节边界调整、误码率测试模块等;通过实验表明,该方案既满足了长距离和高速数据传输的要求,又降低了系统成本。     

A novel technique to measure the group velocity of sound in dispersive media

A technique is proposed for measuring the group velocity of sound by a frequency-modulated (FM) continuous wave (CW) technique. Detailed calculations are presented, showing that V(g)=(deltaomega(m)/deltaphi)d , where V(g), deltaomega(m), deltaphi, and d are, respectively, the group velocity, change of modulation frequency, phase change of the received signal detected by a biphase lock-in amplifier, and the distance traveled by the sound. The approach has the advantage of high resolution compared to the conventional time-of-flight measurement technique.     

A self-adjusting algorithm for byzantine agreement

Summary Byzantine Agreement is important both in the theory and practice of distributed computing. However, protocols to reach Byzantine Agreement are usually expensive both in the time required as well as in the number of messages exchanged. In this paper, we present a self-adjusting approach to the problem. The Mostly Byzantine Agreement is proposed as a more restrictive agreement problem that requires that in the consecutive attempts to reach agreement, the number of disagreements (i.e., failures to reach Byzantine Agreement) is finite. Fort faulty processes, we give an algorithm that has at mostt disagreements for 4t or more processes. Another algorithm is given forn3t+1 processes with the number of disagreements belowt ²/2. Both algorithms useO(n ³) message bits for binary value agreement. Yi Zhao is currently working on his Ph.D. degree in Computer Science at University of Houston. His research interests include fault tolerance, distributed computing, parallel computation and neural networks. He obtained his M.S. from University of Houston in 1988 and B.S. from Beijing University of Aeronautics and Astronautics in 1984, both in computer science. Farokh B. Bastani received the B. Tech. degree in electrical engineering from the Indian Institute of Technology, Bombay, India, and the M.S. and Ph.D. degrees in electrical engineering and computer science from the University of California, Berkeley. He joined the University of Houston in 1980, where he is currently an Associate Professor of Computer Science. His research interests include software design and validation techniques, distributed systems, and fault-tolerant systems. He is a member of the ACM and the IEEE and is on the editorial board of theIEEE Transactions on Software Engineering.     

关于计算机信息网络安全问题的对策分析

当今科技日新月异,经济发展迅猛,也带动了网络技术的不断高速发展,并广泛的应用于各大领域(军事、经济和政治等)。在计算机网络技术的广泛应用形势下,它的安全性问题也就逐渐的突显出来,引起了行业内人士的广泛关注。因此对网络应用中的安全性问题进行分析与探究是迫在眉睫的任务。本文首先论述了其应用中最常见的几大安全性问题,以及说明了对其安全问题所需要防护的相关策略。     

RFID技术在智能交通管理中应用

本文主要介绍RFDI技术定义及系统工作原理,并重点关注RFID技术在智能交通领域的实际应用方式。同时RFID技术也成功解决了车辆自动识别和信息采集问题,为智能交通管理和服务系统的建立提供了强大的信息支撑和保障。     

Characterization of ultrafine La x Sr1−x MnO3 powder prepared by spray pyrolysis

The characterization of La _x Sr_1−x MnO₃ powders produced by spray pyrolysis using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observation, specific surface area (Brunauer-Emett-Teller), and particle size distribution measurements shows that the resultant large particles are loose agglomerates consisting of many small particles. However, the sintered tiny particles can form hard agglomerates, and the particle size increases remarkably. The structures of the powders before and after sintering were identified by x-ray diffraction (XRD). The study of the electrical property of the powder shows that the powder is a metallic conductor. In a reducing atmosphere, the powder can be decomposed. When the powder is cofired with yttria-stabilized zirconia 5% (YSZ) powder at 1200 °C for 5 h, no new phase is produced, and the powder remains a single provskite hexagonal-rhombohedral structure.