The calcium-phosphorus and the simultaneous calcium-oxygen and calcium-sulfur equilibria in liquid iron

The equilibrium Ca₃P_2(s) = 3[Ca] + 2[P] was studied at 1600 ° by equilibrating liquid iron, saturated with Ca₃P₂, and contained in a TiN crucible, with Ca vapor. The source of Ca was liquid Ca contained in an Mo crucible, and the vapor pressure of Ca was varied by varying the position of the Mo crucible in the temperature gradient of a vertical tube furnace. A least-squares analysis of the data gave and. The simultaneous equilibria CaO_(s) = [Ca] + [O] and CaS_(s) = [Ca] + [S] were studied at 1600 ° by equilibrating liquid iron, contained in a pressed and sintered CaO-CaS crucible with Ca vapor. The advantage of this technique is that two equilibrium constants,K _cas andK _cao, and two interaction coefficients, and can be determined from one set of experiments. It was determined that, at 1600 °,K _cas = 5.9 × 10⁻⁸ K _cao = 5.5 × 10⁻⁹,, and. Formerly Graduate Students     

焊接设备中计算机控制系统的抗干扰

本文分析提出焊接设备中影响计算机控制系统的几种主要干扰。结合实际工作,提出了解决的措施和方法。     

稻壳基碳量子点对废水中Pb(Ⅱ)的检测

为了进一步实现生物质废弃资源的综合利用,以及对废水中污染物的检测,以稻壳粉为原料,在600℃和N2氛围下煅烧完成后使用一步水热法制备了钝化剂修饰的碳量子点,得到荧光为蓝绿光的二酸铵(ACA-CQDs)改性稻壳基碳量子点.采用SEM/EDS、HRTEM、FTIR等现代分析技术对碳量子点进行了理化特性表征,发现二酸铵(ACA-CQDs)量子点可以成功检测水中的Pb(Ⅱ).建立了一种有效的检测水体中Pb(Ⅱ)简便快速高效的方法.     

An Analytical Model Including Interface Traps and Temperature Effects in Negative Capacitance Double Gate Field Effect Transistor

Silicon - In this paper, an analytical model for negative capacitance double gate field effect transistor (NC-DG-FET) is proposed. This model includes interface traps and temperature effects, which...     

含多端口能量路由器的多能互补系统故障保护功能测试研究

针对某区域用电负荷存在严重的季节性过载现象,以及可再生能源存在功率波动大、稳定性较差的问题,研制了多能(含水电、光伏、储能)、多端口的能量路由器装置及其能量管理系统.综合考虑当地多场景运行,解决了季节性过载问题,实现了能量的合理配置与利用.首先,对比分析选定能量路由器各端口变换器的拓扑结构;然后,对多场景下的工作模式进行介绍;最后,对含能量路由器的多能互补系统进行故障保护功能测试.测试结果表明,该系统具有较好的故障保护功能,有效实现了不同场景下的工作模式切换,直流母线电压稳定以及上层功率指令跟踪等功能,解决了当地用电负荷季节性过载和可再生能源功率波动较大的问题.     

环丙基砜衍生物的合成研究

在温和的碱性条件下,以TosMIC为砜源,对2-酰基-1-氯环丙烷羧酸酯的区域进行选择性加成,直接合成具有潜在生物活性的环丙基砜类化合物,产率可高达85％,非对映选择性可超过20:1.研究结果首次证明了TosMIC与缺电子环丙烯的亲核加成反应.     

钨酸镁催化超声降解金橙Ⅱ研究

采用水热法合成了钨酸镁(MgWO4)半导体催化剂,并使用金橙II为有机污染物模型研究了其声催化降解性能.结果表明:MgWO4具有良好的声催化活性,可显著提升超声对有机污染物的降解效果,而且MgWO4具有优秀的可重复利用性能.同时,MgWO4催化超声降解金橙Ⅱ的机理研究表明,产生的活性物质如羟自由基(·OH)、超氧阴离子自由基(·O2-)和空穴(h+)是声催化降解金橙II的主要原因.以上研究结果表明MgWO4作为声催化剂用于处理有机染料废水具有良好的应用前景.     

Mold-filling characteristics of AZ91 magnesium alloy in the low-pressure expendable pattern casting process

The magnesium (Mg) alloy low-pressure expendable pattern casting (EPC) process is a newly developed casting technique combining the advantages of both EPC and low-pressure casting. In this article, metal filling and the effect of the flow quantity of inert gas on the filling rate in the low-pressure EPC process are investigated. The results showed that the molten Mg alloy filled the mold cavity with a convex front laminar flow and the metal-filling rate increased significantly with increasing flow quantity when flow quantity was below a critical value. However, once the flow quantity exceeded a critical value, the filling rate increased slightly. The influence of the flow quantity of inert gas on melt-filling rate reveals that the mold fill is controlled by flow quantity for a lower filling rate, and, subsequently, controlled by the evaporation of polystyrene and the evaporation products for higher metal velocity. Meanwhile, the experimental results showed that the melt-filling rate significantly affected the flow profile, and the filling procedure for the Mg alloy in the low-pressure EPC process. A slower melt-filling rate could lead to misrun defects, whereas a higher filling rate results in folds, blisters, and porosity. The optimized filling rate with Mg alloy casting is 140 to 170 mm/s in low-pressure EPC.     

水性聚氨酯材料配方设计技巧

介绍了优选法的0.618法和分数法,对其进行改进创新和原理证明,并应用于生产涂料配方设计中。