莱歇磨双物料粉磨连续转换的操作经验

0 引言传统的粉磨工艺是将矿渣与熟料混合入球磨机进行粉磨,当综合比表面积达到350m~2/kg时,水泥中的矿渣粉比表面积仅能达到270～280m~2/kg,矿渣粉的     

TH-PPM UWB通信系统多址性能研究

介绍了TH-PPM UWB信号,在AWGN信道和多用户干扰条件下对系统的性能进行了分析,包括误码率分析和系统所能接入的最大用户数,对其误码率进行了仿真.结果表明,随着接入用户数目的增加,系统误码率也增加,而增大重复码长度和脉冲重复时间则可降低系统误码率,但增加脉冲重复时间会降低信息传输速率.     

Compressibility of fine-grained soils subjected to closed-system freezing and thaw consolidation

In order to investigate the effects of freezing and thawing on the compressibility of fine-grained soils, freezing and thawing tests and subsequent compression tests with fine-grained soils in an oedometer were carried out. During the freezing, a part of the soils is loosened and another part is over-consolidated under the freezing pressure ?E. The compression curves after the freezing and thaw consolidation are neither different from the normal consolidation curve nor from the rebound curve of an unfrozen soil, until the consolidation pressure ?z = ?E is arrived. Based on the experimental results, a theoretical model has been developed to predict the frost heaves, the thaw-settlements and the compressive deformations of fine-grained soils after the thaw consolidation. The theoretical results are very close to the experimental results.     

光谱法研究Ni[S2P（OCH2CH2Ph）2]2与α,α＇-联吡啶加合反应

利用紫外光谱法研究了Ni[S2P（OCH2CH2Ph）2]2与α,α-联吡啶的加合反应。研究发现Ni[S2P（OCH2CH2Ph）2]2与α,α-联吡啶形成1∶1型加合物,在25℃的苯溶剂中,加合物的离解度α=0.07,稳定常数K稳^θ=2.1×10^6。     

电子剪切散斑技术在木材无损检测中的应用

复合板材及木制品等表面或内部的缺陷对材料性能有很大影响,如何快速准确地对其进行无损检测,并判断缺陷的位置大小是很有意义的.针对松木板试件,通过预置表面和内部隐藏缺陷来近似模拟实际缺陷情况,提出一种基于剪切散斑干涉技术的木材无损检测技术新方法,实现了对松木试件的无损检测.在表面缺陷的检测中讨论了剪切量对结果的影响,利用像素标定的方法,得到直径为6、5、3mm的缺陷信息;在内部隐藏缺陷检测中,借助热加载技术同时引入相移技术使剪切散斑检测技术不仅具有非接触、全场实时检测等特点,而且完成对内部隐藏近表面缺陷的定量无损检测.整个检测过程光路简单,实时快速,实验结果与实际情况符合较好.     

Variable partial-update NLMS algorithms with data-selective updating

We note that some existing algorithms are based on the normalized least-mean square （NLMS） algorithm and aim to reduce the computational complexity of NLMS all inherited from the solution of the same optimization problem, but with different constraints. A new constraint is analyzed to substitute an extra searching technique in the set-membership partial-update NLMS algorithm （SM-PU-NLMS） which aims to get a variable number of updating coefficients for a further reduction of computational complexity. We get a closed form expression of the new constraint without extra searching technique to generate a novel set-membership variable-partial-update NLMS （SM-VPU-NLMS） algorithm. Note that tile SM-VPU-NLMS algorithm obtains a faster convergence and a smaller mean-squared error （MSE） than the existing SM-PU-NLMS. It is pointed out that the closed form expression can also be applied to the conventional variable-step-size partial-update NLMS （VSS-PU-NLMS） algorithm. The novel variable-step-size variable-partial-update NLMS （VSS-VPU-NLMS） algorithm is also verified to get a further computational complexity reduction. Simulation results verify that our analysis is reasonable and effective.     

基于无线通信方式的TV二次压降现场测试方法

针对传统的TV二次压降现场测试方法存在的问题,提出基于无线通信技术的检测方法。以提高工作效率,降低安全风险。     

WuT3无血清培养上清中单克隆抗体纯化工艺的建立

目的对WuT3杂交瘤细胞生物反应器无血清培养上清中单克隆抗体进行分离纯化,建立中试分离纯化工艺。方法采用两步离子交换层析法结合硫酸铵盐析法分离纯化WuT3单抗。在通过小量试验优化纯化参数后,进行中量试验和中试放大。结果建立的纯化方法可以放大到中试规模,每批投料30000ml培养上清,可收获单抗达1.5g,单抗总回收率大于60%。经分离纯化后,单抗IgG纯度大于95%,采用免疫荧光法检测抗体活性合格。结论建立了一条生物反应器无血清培养杂交瘤细胞大规模分离纯化单抗的工艺路线。     

煤的物理性质与电力生产

主要介绍煤的一些物理性质在其燃烧时产生的影响,以便更好地了解煤质对电力生产的影响。     

基于IMU与激光雷达紧耦合的混合匹配算法

针对线、面特征匹配的激光雷达测距与地图构建算法(Lightweight and Ground-Optimized Lidar Odometry And Mapping,LeGO-LOAM)在自动导引运输车(Automated Guided Vehicle,AGV)室内室外实时建图与定位时,易出现激光里程计累积误差大和旋转估计不准确等问题,本工作采用惯性测量单元(Inertial Measurement Unit,IMU)与激光雷达紧耦合的LeGO-LOAM算法,通过IMU为激光雷达提供的初始位姿信息,构建IMU与激光雷达联合误差函数,实现位姿共同迭代优化.其中,对于室外结构化信息较少时,在点对点的迭代最近点算法(Iterative Closest Point,ICP)较高定位精度的基础上,结合LeGO-LOAM算法和ICP算法互补性,进一步提出基于IMU与激光雷达紧耦合的混合匹配算法:当环境中结构信息较多时,激光里程计采用LeGO-LOAM算法,而当环境中结构化信息较少时采用ICP算法.实验结果表明,基于IMU与激光雷达紧耦合的混合匹配算法可有效降低激光里程计相对位姿误差和累积误差,提高AGV小车定位精度以消除部分地图重影.