Comparative studies on the enzymatic absorption of protein hydrolysates in the small intestine of the rat. 3. The absorption trypsins thermatatic and trypsin-thermatatic hydrolysates of a fava bean protein isolate compared to an equimolar mixture of free amino acids

Tryptic, thermitatic, and tryptic-thermitatic Faba bean protein hydrolyzates as well as their equimolar mixture of amino acids were perfused through proximal and distal parts of the intestine (10 cm length) of non-narcotized rats. The total amino-acid concentration of the perfused solution was 50 mM. The absorption of nitrogen and total amino acids from the tryptic and tryptic-thermitatic hydrolyzates was lower than that from the amino-acid mixture, the absorption from the thermitatic hydrolyzate was in accordance with that from the amino-acid mixture. The absorption pattern of the amino acids which preferably undergo a peptidic absorption is similar with the three hydrolyzates: in the proximal intestinal part this concerns glutamic acid and serine, in the distal intestinal part--methionine, alanine, glycin, and serine. The absorption pattern of the amino acids is different between the three hydrolyzates and the amino-acid mixture. Between the absorption pattern of the amino acids from the three hydrolyzates little differences were evident only in the proximal intestinal part. The coefficients of variation of the tryptic-thermitatic hydrolyzates are in accordance with those of the amino-acid mixture, whereas that of the thermitatic hydrolyzates is significantly lower. In the distal intestinal part all supplied forms are more rapidly absorbed than in the proximal part of the intestine.     

Microstructure-related fracture toughness and fatigue crack growth behaviour in toughened, anhydride-cured epoxy resins

Fracture toughness and fatigue crack propagation (FCP) of plain and modified anhydride-cured epoxy resin (EP) were studied at ambient temperature. Liquid carboxyl-terminated acrylonitrile-butadiene (CTBN) and silicon (SI) rubber dispersions were used as tougheners for the EP. The morphology of the modified EP was characterized by dynamic mechanical analysis (DMA) and by scanning electron microscopy (SEM). The fracture toughness, K_c, of the compositions decreased with increasing deformation rate. K_c of the EP was slightly improved by CTBN addition and practically unaffected by incorporation of the SI dispersion when tests were performed at low cross-head speed, v. Both modifiers improved K_c at high v, and also the resistance to FCP, by shifting the curves to higher stress intensity factor ranges, ΔK, by comparison with the plain EP. It was established that both fracture and fatigue performance rely on the compliance, J_R, at the rubbery plateau, and thus on the apparent molecular mass between crosslinks, M_c. The failure mechanisms were less dependent upon the loading mode (fracture, fatigue), but differed basically for the various modifiers. Rubber-induced cavitation and shear yielding of the EP were dominant for CTBN, whereas crack bifurcation and branching controlled the cracking in SI-modified EP. The simultaneous use of both modifiers resulted in a synergistic effect for both the fracture toughness at high deformation rate and the FCP behavior.     

Behavioral and computational models of spatial attention.

Pigeons pecked for food in a spatially cued choice reaction time (RT) task. A brief (50-msec) white light appeared on a left or right key and probabilistically predicted the location (on either the left or right key) of a subsequent target stimulus. The time between cue and target onset (stimulus onset asynchrony), the base rate of left cues, and the probability that the cue correctly predicted the target (cue validity) were experimentally varied. The mean RT to respond to the target key was faster on correctly cued trials (defining a validity effect), decreased for both valid and invalid trials as stimulus onset asynchrony increased (defining an alerting effect), showed a variety of base-rate effects, and did not depend on cue validity. It is shown with a computational-processing model that dynamic interactions of short-term and associative memory processes are sufficient to produce these attention-like empirical phenomena. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Comparative studies on the enzymatic absorption of protein hydrolysates in the small intestines of the rat. 3. The absorption of trypsin, thermitatic and trypsin thermitatic wheat gluten hydrolysates in comparison with equimolar mixtures of free amino acids

Tryptic, thermitatic, and tryptic-thermitatic wheat-gluten hydrolyzates as well as their equimolar amino-acid mixture were perfused through proximal and distal parts of the intestine (10 cm length) of non-narcotized rats. The total amino-acid concentration of the perfused solution was 50 mM. The tryptic hydrolyzate showed a significantly lower absorption of nitrogen and total amino acids than the amino-acid mixture. Both the supplied forms were very different as to their absorption pattern of the amino acids. The high variability of the percental absorption of the individual amino acids of the tryptic hydrolyzate results in a high coefficient of variation. The absorption of nitrogen and total amino acids from thermitatic and tryptic-thermitatic hydrolyzates is equal to that from the amino-acid mixture. In a peptidic form glutamic acid is more rapidly absorbed from the two hydrolyzates, and methionine from the tryptic-thermitatic hydrolyzate in both the intestinal parts. As to alanine and glycine this concerns only the distal intestinal part for both the hydrolyzates. There are no differences between the absorption patterns of the two hydrolyzates but in comparison with the amino-acid mixture and the tryptic hydrolyzate differences were evident. The coefficients of variation of both the hydrolyzates are significantly lower as compared to those of the tryptic hydrolyzate and the amino-acid mixture. All forms of supply are more rapidly absorbed in the distal than in the proximal part of the intestine.     

Precision of micromilled x-ray masks and exposures

 Micromechanical milling has been shown to be a rapid and direct method for the fabrication of structures with the geometry and size suitable for use as x-ray mask absorbers. While the micromilling process can not duplicate the size and resolution of absorber patterns created by high energy electron beam or optical lithography methods, micromilling can repeatedly create absorber line widths down to 10 micrometers, or less, with a one-sigma tolerance of 0.5 micrometers. A method for easily characterizing milling tool run out has been adapted so tool change out can be more routine. The milling process leaves some absorber burrs and the absorber is apparently tapered at the machined wall which introduce process biases, both of which add to exposure degradation. Nevertheless, based on work to date, it appears both of these effects can be reduced to acceptable limits. Received: 25 August 1997/Accepted: 3 September 1997     

Microstructure and fracture behaviour of short and long fibre-reinforced polypropylene composites

Microstructure and fracture mechanical behaviour of injection-moulded, longer glass fibrereinforced polypropylene (Verton* aspect ratio 320) were studied as a function of fibre volume fraction and compared to that of shorter fibre-filled polypropylene (aspect ratio 70). Toughness was measured using instrumented notched lzod and falling weight impact tests, as well as compact tension specimens. It was found that the addition of longer fibres generally increased the toughness of the material, although more significant increases were seen in the impact tests than were seen in the compact tension test. For the latter results, a correlation between toughness improvement and microstructural details was performed on the basis of the microstructural efficiency concept, a semi-empirical approach of the formK _c,C = (a* +nR)K _c,M, where,K _c,C andK _c,M are the fracture toughnesses of the composite and the matrix, respectively,_a* is a matrix stress correction factor,n is a scaling parameter andR is a fibre reinforcement effectiveness factor. The latter corrects for differences in the composite microstructures, and incorporates effective fibre orientation factors, layering of injection moulded parts, and fibre volumes in the different layers.Nomenclature a crack length - a ^* matrix toughness correction factor - A cross-sectional area - B thickness of the sample plaques - C thickness of the composite core regions - E _peak energy adsorbed up to the maximum force in the impact load-displacement curve - E _t tensile modulus - F _max maximum force in impact force-displacement curves - f _p fibre orientation factor - f _pe effective orientation factor - f _pe,C effective orientation parameter, core region - f _{pe, s} effective orientation parameter, surface region - F critical load in the tensile test load-displacement curves - K _c critical stress intensity factor/fracture toughness - K _L fracture toughness of the composite materials - K _d dynamic fracture toughness - K _L fracture toughness of the matrix - L test with crack parallel to the mould filling direction - M microstructural efficiency factor - n scaling parameter for reinforcement effectiveness factor (energy absorbtion ratio) - R reinforcement effectiveness factor - S thickness of the composite surface regions - T test with crack perpendicular to the mould filling direction - V _f fibre volume fraction - V _m matrix volume fraction (= 1 —V _f) - W specimen width - W _f fibre weight fraction - W _m matrix weight fraction (= 1 —W _f) - X _n number average fibre length - X _v volume average fibre length - Y(a/ W) polynomial correction for compact tension specimens - variable in effective orientation factor formula - variable in effective orientation factor formula - _B strain to break - _c density of the composite - _f fibre density - _m matrix density - _F fracture strength - fibre angle with respect to a reference direction     

Finite canonical rewriting systems for congruences generated by concurrency relations

WhenC is a concurrency relation on alphabet , then ^*/= _C is a free partially commutative monoid. Here we show that it is decidable in polynomial time whether or not there exists a finite canonical rewriting systemR on such that the congruences _R ^* generated byR and = _C induced byC coincide. Further, in case such a systemR exists, one such system can be determined in polynomial time.