Comparison of open and closed circuit HPGR application on dry grinding circuit performance

A conventional cement grinding circuit is composed of a two compartment tube mill, a mill filter which collects the fine material inside the mill and a dynamic air separator where final product with required fineness is collected. In general the material fed to the circuit has a top size of 50 mm which is very coarse for the ball mill. For this purpose, later in 1980s, high pressure grinding rolls (HPGR) has found applications as a pregrinder which increased throughput of the grinding circuit at the same fineness.In early applications, HPGR was operated in open circuit. But later as the operating principle of the equipment based on the compression, some portion of the HPGR discharge recycled back to improve efficiency of the mill or operated closed circuit with classifiers. Within this study effect of open and closed circuit HPGR applications on dry grinding circuit performance was examined. For this purpose sampling studies around three different cement grinding circuit were completed. In the first study, a circuit including open circuit HPGR, ball mill and air separator was sampled and chosen as the basic condition. As the final product size distribution is important for grinding circuit, model structure of each equipment was developed. The second and third surveys were carried out around closed circuit HPGR operation with V and VSK separator to develop models for the separators. Finally the separator models were used in basic condition to simulate closed circuit HPGR application.It was understood from the studies that closed circuit HPGR operation improved the overall circuit efficiency at the same final product fineness by reducing the specific energy consumption.     

Plasma polymerization‐modified bacterial polyhydroxybutyrate nanofibrillar scaffolds

The design and the development of novel scaffold materials for tissue engineering have attracted much interest in recent years. Especially, the prepared nanofibrillar scaffold materials from biocompatible and biodegradable polymers by electrospinning are promising materials to be used in biomedical applications. In this study, we propose to produce low‐cost and cell‐friendly bacterial electrospun PHB polymeric scaffolds by using Alcaligenes eutrophus DSM 545 strain to PHB production. The produced PHB was characterized by Nuclear Magnetic Resonance (NMR) and Fourier Transform Infrared Spectroscopy (FTIR). Nanofibrous scaffolds were fabricated via electrospinning method that has a fiber diameter approximately 700–800 nm. To investigate cell attachment, cell growth, and antioxidant enzyme activity on positively and negatively charged PHB scaffold, PHB surface was modified by plasma polymerization technique using polyethylene glycol (PEG) and ethylenediamine (EDA). According to the results of superoxide dismutase (SOD) activity study, PEG‐modified nanofibrillar scaffolds indicated more cellular resistance against oxidative stress compared to the EDA modification. As can be seen in cell proliferation results, EDA modification enhanced the cell proliferation more than PEG modification, while PEG modification is better as compared with nonmodified scaffolds. In general, through plasma polymerization technique, surface modified nanofibrillar structures are effective substrates for cell attachment and outgrowth. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effects of porosity and related interstitial phase morphology difference on the grindability of clinkers

The effects of regional clinker porosity and interstitial phase morphology differences on grindability of clinkers have been investigated within the scope of this study. Porosity and phase characteristics of two clinkers from different furnaces which are using the same raw materials were determined by the application of image processing techniques on SEM images of polished surfaces. Comparison of interstitial phase compositions of two clinkers showed that, clinkers with similar phase compositions may have different grindability due to the porosity and phase morphology differences. Porous clinkers usually exhibit a dendritic interstitial phase morphology with an improved grindability. Increasing porosity also leads to greater incidence of the dendritic morphology in porous regions and lower incidence of alkali in the aluminate in dendritic regions.     

Experimental and numerical investigation of thermal characteristics of a novel concentric type tube heat exchanger with turbulators

In this study, the heat transfer performance and friction characteristics of a novel concentric tube heat exchanger with different pitches of helical turbulators were investigated experimentally and numerically for a Reynolds number range from 3000 to 14 000. An experimental system was established to obtain experimental data. The numerical simulations were performed by using a three dimensional numerical computation technique, a commercial CFD computer code. Then, the heat transfer performance and friction characteristics of several helical turbulators were compared. The experimental, numerical and empirical correlation results were in a good agreement with each others. As a result, the heat transfer enhancements using turbulators were 2.91, 2.41, 2.18 and 1.99 times better than the smooth tube for pitch distances of p = 20, 40, 60 and 80 mm, respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and electrochemical,electrochromic and electrical properties of novel s-triazine bridged trinuclear Zn(II), Cu(II) and Lu(III) and a tris double-decker Lu(III) phthalocyanines

The new s-triazine-bridged trinuclear Zn(II) and Cu(II) phthalocyanines have been synthesized from the reaction of corresponding anhydrous metal salts, Zn(OAc)₂ and CuCl with 4,5-bis(hexylthio)-phthalonitrile and 2,4,6-tris(2-thiophthalonitrile)-s-triazine. The tris phthalonitrile derivative of s-triazine was prepared from the reaction of 4-nitrophthalonitrile and thiocyanuric acid in dry dimethylformamide as solvent using K₂CO₃ as the base. The same route was applied to prepare the trinuclear Lu(III) phthalocyanine analogue. The conversion of tris phthalonitrile into its isoindoline derivative was accomplished by bubbling ammonia gas through a solution in methanol in the presence of sodium methoxide. The cyclization of two different isoindoline derivatives and 4,5-bis(hexylhthio)-1,2-diiminoisoindoline, with lutetium (III) acetate in dimethylformamide gave trinuclear Lu(III) phthalocyanine. The reaction of this complex with octakis-hexylthio phthalocyanine led to the isolation of tris double-decker Lu(III) phthalocyanine. The structures of the target compounds were confirmed by elemental analysis, UV–vis, IR and MALDI-TOF mass spectroscopies. The d.c. and a.c. conductivities of the phthalocyanine compounds were measured as a function of temperature. The small value of pre-exponential factor suggested the conduction by localized states in the band tails and by localized states near the Fermi level. The temperature dependence of the frequency exponent showed that the conduction in these compounds is due to hopping of charge carriers. The tris double-decker phthalocyanine complex showed well-defined electrochromic behaviour with green-blue and blue-purple colour transitions.     

The investigation of effects of digital proofing systems used in colour management on print quality with neural networks

The aim of this study is to assist users and to determine how digital proofing systems used in colour management effect print qualities. Also the main theme of this study is to determine the effects of digital proofing systems used in colour management on print quality by artificial neural network (ANN). The R² values are obtained 0.99702 and 0.99688 for training data as matte and cuated papers, respectively. Similarly, these values for testing data are 0.994707 and 0.99629, respectively. The ANN approach shows greater accuracy for evaluating colour management. Based on the outputs of the study, ANN model can be used to estimate the effects of digital proofing systems used in colour management on print quality with highly confidence.     

Thermoeconomic optimization of subcooled and superheated vapor compression refrigeration cycle

An exergy-based thermoeconomic optimization application is applied to a subcooled and superheated vapor compression refrigeration system. The advantage of using the exergy method of thermoeconomic optimization is that various elements of the system—i.e., condenser, evaporator, subcooling and superheating heat exchangers—can be optimized on their own. The application consists of determining the optimum heat exchanger areas with the corresponding optimum subcooling and superheating temperatures. A cost function is specified for the optimum conditions. All calculations are made for three refrigerants: R22, R134a, and R407c. Thermodynamic properties of refrigerants are formulated using the Artificial Neural Network methodology.     

Antioxidant and anticholinesterase evaluation of selected Turkish Salvia species

Since Salvia species (Lamiaceae) have been recorded to be used against memory loss in European folk medicine, we herein examined in vitro anticholinesterase and antioxidant activities of 56 extracts prepared with petroleum ether, chloroform, ethyl acetate and methanol obtained from 14 Salvia species (Salvia albimaculata Hedge and Hub, Salvia aucheri Bentham var. canescens Boiss and Heldr, Salvia candidissima Vahl. ssp. occidentalis, Salvia ceratophylla L., Salvia cryptantha Montbret and Bentham, Salvia cyanescens Boiss and Bal., Salvia frigida Boiss, Salvia forskahlei L., Salvia halophilaHedge, Salvia migrostegia Boiss and Bal., Salvia multicaulis Vahl., Salvia sclarea L., Salvia syriaca L., Salvia verticillata L. ssp. amasiaca) growing in Turkey. The antioxidant activities were assessed by both chemical and enzymatic methods against 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging and xanthine/xanthine oxidase (XO) system generated superoxide anion radical inhibition. Anticholinesterase effect of the extracts was tested against both acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) at concentrations of 0.2 and 1 mg/ml using a microplate-reader assay based on the Ellman method. Most of the extracts did not show any activity against AChE at 0.2 mg/ml, while the chloroform extracts had noticeable inhibition against BChE between 47.7% and 74.7%. The most active extracts at 1 mg/ml for AChE inhibition were observed to be petroleum ether extract of Salvia albimaculata (89.4%) and chloroform extract of Salvia cyanescens (80.2%), whereas ethyl acetate extracts of Salvia frigida and Salvia migrostegia, chloroform extracts of Salvia candidissima ssp. occidentalis and Salvia ceratophylla, as well as petroleum ether extract of Salvia cyanescens were found to inhibit potently BChE (92.2%, 89.6%, 91.1%, 91.3%, and 91.8%, respectively). Particularly, the ethyl acetate and methanol extracts were observed to be highly active against both DPPH and XO. Our data indicates that nonpolar extracts of Salvia species for anticholinesterase activity and the polar extracts for antioxidant activity are worth further phytochemical evaluation for identifying their active components.     

Infrared absorption in thick film resistors

Infrared absorption in polymer and glass-based thick film resistors has been measured between 400 and 1500 cm^–1. Sample structures are discussed on the basis of X-ray, Fourier transform-infrared and resistance-temperature data. It is shown that in polymer-based thick film resistors, the particulate phase is mostly responsible for the infrared absorption between 400 and 900 cm^–1, whereas the infrared absorption at higher wave numbers is related to the continuous phase. In glass-based thick film resistors, absorption is mostly determined by the highly doped glass. The results indicate that thick film resistors can be used as an absorbent coating in the 400–1500 cm^–1 region by suitable selection of the continuous and particulate phases.