Mechanical and microstructural properties of low-carbon steel-plate-reinforced gray cast iron

In the present experimental study, strengthening of gray cast iron by reinforcing with steel plates was investigated in the as-cast and normalized conditions. Normalizing heat treatments were applied to the specimens at temperatures of 800 °C and 850 °C. Three-point bend specimens were manufactured from gray cast iron and also from gray cast iron with reinforced steel plates. Flexural strengths of the steel-plate-reinforced cast iron were calculated for four distinct volume fractions (V_r = 0.04, 0.08, 0.12, and 0.16). The current study shows that the steel-plate-reinforced gray cast iron has higher flexural strength and flexural modulus than the cast iron without reinforcement. The flexural strength considerably increases with slight increase in normalization temperature. Optical and scanning electron microscopy analyses were used to examine flake morphology and microstructures of gray cast iron and steel-plate-reinforced gray cast iron. It is noted that carbon diffuses from the gray cast iron to the steel plates. A transition region containing partially dissolved graphite and having high hardness was observed due to the carbon diffusion.     

Tracker-aware adaptive detection: An efficient closed-form solution for the Neyman–Pearson case

A promising line of research for radar systems attempts to optimize the detector thresholds so as to maximize the overall performance of a radar detector–tracker pair. In the present work, we attempt to move in a direction to fulfill this promise by considering a particular dynamic optimization scheme which relies on a non-simulation performance prediction (NSPP) methodology for the probabilistic data association filter (PDAF), namely, the modified Riccati equation (MRE). By using a suitable functional approximation, we propose a closed-form solution for the special case of a Neyman–Pearson (NP) detector. The proposed solution replaces previously proposed iterative solution formulations and results in dramatic improvement in computational complexity without sacrificed system performance. Moreover, it provides a theoretical lower bound on the detection signal-to-noise ratio (SNR) concerning when the whole tracking system should be switched to the track before detect (TBD) mode.     

Fixed-Bed Pyrolysis of Hazelnut (Corylus Avellana L.) Bagasse: Influence of Pyrolysis Parameters on Product Yields

Fixed-bed slow pyrolysis experiments have been conducted on a sample of hazelnut bagasse to determine particularly the effects of pyrolysis temperature, heating rate, particle size and sweep gas flow rate on the pyrolysis product yields. The temperature of pyrolysis, heating rate, particle size and sweep gas flow rate were varied in the ranges 350–550° C, 10 and 50° C/min, 0.224–1.800 mm and 50–200 cm³/min, respectively. Under the various pyrolysis conditions applied in the experimental studies, the obtained char, liquid, and gas yield values ranged between 26 and 35 wt%, 23 and 34.40 wt%, and 25 and 32 wt%, respectively. The maximum biooil yield of 34.40% was obtained at the final pyrolysis temperature of 500°C, with a heating rate of 10° C/min, particle size range of 0.425–0.600 mm and a sweep gas flow rate of 150 cm³/min.     

Synthesis and characterization of two-armed poly(ɛ-caprolactone) polymers initiated by the Schiff's base complexes of copper(II) and nickel(II)

Two-armed poly(?-caprolactone) (TAPCL) polymers were successfully synthesized via the ring opening polymerization (ROP) of ?-caprolactone (?-CL) using the Schiff's base complexes [Cu(SAEE)₂] (1) and [Ni(SAEE)₂] (2), which have two hydroxyl functional groups, as the two-site initiators and tin(II) 2-ethylhexanoate (Sn(Oct)₂) as the catalyst in bulk at 115 °C. The Schiff's base complexes (1 and 2) were synthesized by utilizing the concentrated template synthesis method starting from salicyl aldehyde, 2-(2-aminoethoxy) ethanol and related metal acetate salts. The synthesized TAPCL polymers were characterized by GPC, FTIR, UV–vis, and electron paramagnetic resonance (EPR). The molecular weights of TAPCL polymers linearly increased with increasing molar ratio of the monomer to the initiator. The results obtained from FTIR, UV–vis, and EPR studies indicated that TAPCL polymers had the Schiff's base complexes at the junction point of PCL arms. The crystallization behavior of TAPCL was studied by using differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). Thermal behavior of TAPCL was also investigated by thermogravimetrical analysis (TGA).     

Automated Average Areal Rainfall Calculation inLibya

An automated computer program isdeveloped for calculating areal average rainfall(AAR) value and its implementation is presentedfor the arid region representative country,Libya.The procedure is conceptually simple byconsideration of almost equilateral trianglesconnecting adjacent meteorological stations withthe assumption of linear rainfall change betweenstations. The applications of the methodologyhave been achieved for monthly, seasonal andannual rainfall amounts recorded at 29meteorological stations scattered over thenorthern part of Libya.It has been shown thatthe proposed methodology yields results that arecomparable with the commonly used AAR calculationmethods.     

Spatial Precipitation Assessment with Elevation by Using Point Cumulative Semivariogram Technique

Depiction of precipitation change by elevation in an areaindicates the possibilities of orographic rainfall occurrencesin the mountainous regions. In general, precipitation increaseswith elevation but sometimes inverse cases occur locally due toorographic and meteorological features of the area. Inpractice, prior to any quantitative modeling, qualitativeassessments and interpretations help to have sound foundationsin search for a suitable model. In this article, standardizedpoint cumulative semivariogram (SPCSV) methodology is employedfor identification of the precipitation-elevationrelationship. According to relative positions of theprecipitation and elevation SPCSVs four different precipitationcategories are suggested. The application of the methodologyproposed is presented for the precipitation records from YuccaMountain, Nevada, U.S.A.     

Determination of flavan-3-ols and trans-resveratrol in grapes and wine using HPLC with fluorescence detection

Concentrations of trans-resveratrol, catechin and epicatechin were analyzed in musts and wines produced from seven red and four white grape cultivars from various wine growing regions of Turkey. Phenolics were quantified using an HPLC method optimized for the separation of wine phenolics. Wine samples contained higher phenolics levels than the corresponding musts. With the exception of Semillion, white wines and musts contained lower concentrations of phenolics than red wines and musts. However, the white cultivar Semillion had the highest concentrations of catechin and epicatechin among all wine and must samples. Semillion wine catechin and epicatechin were 13.7 and 11.8 mg/L, respectively. The highest level of trans-resveratrol among the white cultivars was found in Narince wine (1.93 mg/L). Within the red wine and must cultivars, Bo?azkere, Öküzgozü, and Cabernet contained the highest concentrations of flavan-3-ols and trans-resveratrol. Catechin was the major phenolic in all wines and most musts. Epicatechin was the major phenolic in 6 of the 11 must samples, but none of the wine samples. trans-Resveratrol was generally found in lowest concentrations in both wines and musts.     

Poly(ether sulfonamide)s with glycidyl pendant units

SUMMARY High molecular weight poly (ether sulfonamide) has been prepared by condensation of 4,4'-dichlorosulfonyldiphenylether with ethylenediamine. The reaction of potassium salt of poly (ether sulfonamide) with epichlorohydrin gives the corresponding N-glycidiyl derivative in yield as high as 98%. The resulting polymer offers many functionalization possibilities through ring opening of the oxirane units. Also the glycidiyl bearing polymer may act as multifunctional post-crosslinking agent for polymers carrying hydroxy, amino or carboxyl groups. Received: 16 February 1998/Revised version: 4 May 1998/Accepted: 7 May 1998     

Equilibrium and kinetic isotherms and parameters for molecularly imprinted with sclareol poly(acrylonitrile‐co‐acrylic acid) matrix

The present work continues the previous studies concerning the synthesis and characterization of molecularly imprinted polymers (MIPs) with sclareol as template and three poly(acrylonitrile‐co‐acrylic acid) (AN:AA) copolymers with different ratios between monomers as matrices. The previous studies of rheology, elemental analysis, infrared spectroscopy, size exclusion chromatography, thermogravimetry, differential scanning calorimetry, batch rebinding tests, and Scatchard analysis, which confirmed the molecular imprinting, are being completed with the current equilibrium and kinetic adsorption studies. For this purpose, eight adsorption isotherms and three kinetic adsorption models were applied to six sets of experimental data obtained after three sclareol‐imprinted adsorbents (MIPs) and three nonimprinted adsorbents (NIPs) were submitted to batch adsorption experiments. After ordering the adsorption models according to the “minimum sum of normalized errors (SNE)” criteria, it was concluded that the adsorption in sclareol imprinted AN:AA copolymers is characterized by low surface coverage, takes place on heterogeneous binding sites and is reversible, while for NIPs the results suggest a difficult adsorption and/or easiness of template extraction, and that NIPs have homogeneous, but nonimprinted micropores. For the kinetic experiments, the minimum SNE for MIPs points to the first order kinetic model, fact that suggests a physical adsorption of template molecules on the imprinted sites. POLYM. ENG. SCI., 55:1152–1162, 2015. © 2014 Society of Plastics Engineers