CaO—MgO—Al2O3—SiO2—F系可切削微晶玻璃的晶化机理研究

在CaO-MgO-Al2O3-SiO2-F系可切削微晶玻璃体系中，本研究分析了K2O和ZrO2c对玻璃析晶和显微结构的影响，探讨了晶化机理。K^ 促使云母相的生成和球晶的形成，晶化过程中，云母和顽辉石互为外延生长，使球晶中条状晶解离为片状晶。ZrO2与F^-一起促使玻璃晶化后形成棒状云母晶粒，并具有晶粒长径比大、相互交换的显微结构。     

助磨介质作用下旋窑熟料微细化过程的研究

研究了助磨剂作用下旋窑熟料的微细化过程，结果表明，助磨剂在不同粉磨阶段的作用机理不同，在相同的粉磨时间下助磨剂提高了粉磨细度，改善了物料的颗粒分布，改变了颗粒形貌，还改变了粉磨物料的微观结构，加剧了物料的晶格畸变，晶格缺陷及无定形比，加速了物料结构中化学键的破坏，尤其是C3S矿物中Si-O键的断裂，从而增加物料的反应活性。     

盐酸蒸气处理对酞菁氧钛薄膜的影响

用HCl蒸气对真空蒸发沉积的酞菁氧钛薄膜进行了处理，并用UV-Vis吸收谱、X射线光电子能谱（XPS）和X射线衍射（XRD）进行了分析，吸收谱结果表明HCl与酞菁氧钛蒸气作用后产生一个新的吸收峰，峰值位于820nm附近，此峰的出现使得酞菁氧钛光吸收带（Q带）加宽进入红外波段，光电子谱分析表明酞菁氧钛薄膜的成分发生了变化，其中Cl和O的含量随HCl蒸气处理的时间的增加而增加，而N和Ti的含量随HCl蒸气处理时间的增加而减小，说明HCl蒸气可与真空蒸发沉积的酞菁氧钛薄膜发生作用。XRD测试结果表明，经HCl蒸气处理后的酞菁氧钛薄膜的衍射谱中出现了若干新的衍射峰，表明酞菁氧钛分子的排列结构也发生了变化。     

Nature and Growth of Interaction Layers Formed during the Reaction between Solid Ni and Liquid Al

The nature and growth of the interaction layers between solid Nb and liquid Al has been studied by carrying out the tests on Nb(s)-Al(l)and Nb(s)-Al(l)-Ni(s) reaction couples isothermally reacted between 700℃and 900℃for different time intervals.It has been found that the interaction layer between Nb and Al contains two parts:a thin continuous layer of NbAl3 adjacent to the Nb surface and a two-phase zone constituted of NbAl3 particles dispersed in an Al matrix.Although the nature and growth of interaction layers follows the sour-stage mechanism,a typical cruciform pattern does not occur in Nb(s)-Al(l) reaction couples.However,a cruciform pattern was observed in Nb(s)-Al(l)-Ni(s)reaction couples.The movement of NbAl3 particles is important to the production of cruciform pattern in the reaction couples.     

Pb（Fe2／3W1／3）O3的制备及其介电性能研究

本文采用半化学法，即硝酸铁代替传统氧化物混合法中的三氧化二铁与PbO和WO3浆料混合，经850℃，2h预烧，一步合成了钙钛矿单相的Pb(Fe2/3W1/3)O3(PFW)预烧粉体；再经870℃和2h烧结，得到了纯钙钛矿相的PFW陶瓷，其理论密度大于98%，在1kHz时的最大介电常数εmax为8000，高于二次合成法和传统氧化物法制备的PFW陶瓷，表明半化学法对制备PFW陶瓷是可行的。     

Isothermal Gas Forming of Mg Alloy AZ31 Sheet

There have been reports on sheet forming of Mg alloy in industry via the punch and die method;this paper is probably the first formal one for studying the sheet formability of AZ31 employing pressurized gas to press the sheet into a female die cavity at various elevated temperatures.The results indicate it is feasible to form a rectangular box via pressurized gas from extruded sheets of 0.5 and 1.7 mm thick.The formed box has 1:2 depth over width ratio,which should be large enough when dealing with realistic industrial sheet forming parts.Presently,forming a sheet of 0.5 mm thick is considered a technical challenge by industry,and it is conquered as demonstrated in this paper.Gas forming technique applied to Mg alloy is unprecedented and shows potential for industrial utilization.     

Influence of Ti Powder Characteristics on Combustion Synthesis of Porous NiTi Alloy

Porous NiTi shape memory alloy (SMA) is a novel biomedical material used for human hard tissue implant .The influence of elemental titanium powder characteristics such as powder morphology, particle size and specific surface area( SSA) on the minimal ignition temperature ,combustion temperature and final product of porous Ni-Ti SMA fabricated by combustion synthesis method was investigated in this paper by scanning electron microscopy (SEM) and laser diffraction.The preliminary data indicated that the titanium powder characteristics had a strong effect on combustion synthesis of porous NiTi SMA.     

Experimental Study about Activated Water Generated by the Electro—hydraulic Impulse Strengthening the Mechanical Performance of Concrete

On the basis of a great number of experiments, it is proved that the strength of concrete is improved greatly when it is mixed with activated water produced by the electro-hydraulic impulse.With the proper parameters, the compression strength of concrete can be increased by 45% .The reason for improvement of concrete strength by using activated water is discussed from the aspect of the structure of molecule.     

用正电子湮没技术研究微量铝对铁基非晶态合金的影响

用正电子湮没技术研究了七种铁基非晶态合金，结果表明铝含量高的合金的正电子湮没参数大于铝含量低的合金，意味着铝的存在会造成铁基非晶态合金微观结构的不均匀性，很可能是较多的类空位缺陷出现。     

企业网络信息管理系统的总体设计

介绍了企业网络信息管理系统总体设计方案，提出了软、硬件的设计方案和实现方法。该系统可以实时掌握控制各职能部门的运营状况，有效地调配企业资源，提高企业的市场竞争能力。