Dynamic duty cycle and adaptive contention window based QoS-MAC protocol for wireless multimedia sensor networks

Rapid penetration of small, customized wireless devices and enormous growth of wireless communication technologies has already set the stage for large-scale deployment of wireless sensor networks. While the need to minimize the energy consumption has driven significant researches in wireless sensor networks, offering some precise quality of service (QoS) for multimedia transmission over sensor networks has not received significant attention. However, the emerging new applications like video surveillance, telemedicine and traffic monitoring needs transmission of wireless multimedia over sensor networks. Naturally, offering some better QoS for wireless multimedia over sensor networks raises significant challenges. The network needs to cope up with battery-constraints, while providing improved QoS (end-to-end delay and bandwidth requirement). This calls for a suitable sensory MAC protocol capable of achieving application-specific QoS. In this paper, we have proposed a new QoS-based sensory MAC protocol, which not only adapts to application-oriented QoS, but also attempts to conserve energy without violating QoS-constraints. Performance modeling, analysis and simulation results demonstrate that the proposed protocol is capable of providing lower delay and better throughput, at the cost of reasonable energy consumption, in comparison to other existing sensory MAC protocols.     

A survey of inspection strategy and sensor distribution studies in discrete-part manufacturing processes

Methodologies, modeling approaches, and the interactions between various system elements involved in inspection-allocation and sensor-distribution problems, that influence operational quality decisions, are discussed. The surveyed papers fall into two broad categories: inspection-oriented quality-assurance strategies and diagnosis-oriented sensor-distribution strategies. Within each subarea, individual papers are further classified according to the system characteristics of the physical processes being investigated and the modeling characteristics of the approaches being used. As evident from nearly 100 journal articles published in the past four decades, these two problems have received considerable attention from researchers in quality engineering, management science, operations research as well as robotic vision arenas. We find that the inspection-allocation problem has been studied rather comprehensively whereas the relatively new sensor-distribution problem has plenty of opportunities for researchers. Discussions are also presented to summarize our observations based on the classifications along with some thoughts on future research.     

Effect of beam limiting aperture and collector potential on multi-element focused ion beams

A compact microwave driven plasma based multi-element focused ion beam system has been developed. In the present work, the effect of reduced beam limiter (BL) aperture on the focused ion beam parameters, such as current and spot size, and a method of controlling beam energy independently by introducing a biased collector at focal point (FP) are investigated. It is found that the location of FP does not change due to the reduction of BL aperture. The location of FP and beam size are found to be weakly dependent on the collector potential in the range from -8 kV to -18 kV.     

Pipelined VLSI Architecture using CORDIC for Transform Domain Equalizer

In this paper, a pipelined architecture using CORDIC for realization of transform domain equalizer is presented. Transform domain equalizer has much faster convergence than its time domain counterpart for practical hardware realization having nonzero adaptation delay. Here running DFT is employed as the transform, and CORDIC is used for realization of running DFT. Pipelining is applied throughout the architecture, thus limiting the critical path delay to the propagation delay of a single 16 bit adder for 16 bit arithmetic. For N tap equalizer, primary clock speed is N times of the sample clock speed, so that on arrival of each sample, the computation of whole transform and weight update is possible. In the proposed architecture, hardware complexity is reduced by fully utilizing the pipeline without using parallel structures. The adaptation delay is only 2 sample clock periods resulting in fast convergence. The proposed architecture is suitable for VLSI implementation with primary clock speed limited by the binary adder propagation delay which could be as low as 2 ns in the present state-of-the-art technology.     

Morphology,Mineralogy and Mixing of Individual Atmospheric Particles Over Kanpur (IGP): Relevance of Homogeneous Equivalent Sphere Approximation in Radiative Models

Estimation of the direct radiative forcing (DRF) by atmospheric particles is uncertain to a large extent owing to uncertainties in their morphology (shape and size), mixing states, and chemical composition. A region-specific database of the aforementioned physico-chemical properties (at individual particle level) is necessary to improve numerically-estimated optical and radiative properties. Till date, there is no detailed observation of the above mentioned properties over Kanpur in the Indo-Gangetic Plain (IGP). To fill this gap, an experiment was carried out at Kanpur (IITK; 26.52°N, 80.23°E, 142 m msl), India from April to July, 2011. Particle types broadly classified as (a) Cu-rich particles mixed with carbon and sulphur (b) dust and clays mixed with carbonaceous species (c) Fe-rich particles mixed with carbon and sulfur and (d) calcite (CaCO₃) particles aged with nitrate, were observed. The frequency distributions of aspect ratio (AR; indicator of extent of particle non-sphericity) of total 708 particles from April to June reveal that particles with aspect ratio range >1.2 to ≤1.4 were abundant throughout the experiment except during June when it was found to shift to high AR range, >1.4 to ≤1.6 (followed with another peak of AR i.e. >2 to ≤2.4) due to dust storm conditions enhancing the occurrence of more non-spherical particles over the sampling site. The spherical particles (and close to spherical shape; AR range, 1.0 to ≤1.2) were found to be <20% throughout the experiment with a minimum (11.5%) during June. Consideration of Homogeneous Equivalent Sphere Approximation (HESA) in the optical/radiative model over the study region is found to be irrelevant during the campaign.     

Nanoindentation and Wear Characteristics of Al 5083/SiC_p Nanocomposites Synthesized by High Energy Ball Milling and Spark Plasma Sintering

Al 5083/10 wt% SiC p nano composites have been synthesized by means of high energy ball milling followed by spark plasma sintering (SPS). Nano composites produced via this method exhibited near-theoretical density while retaining the nano-grained features. X-ray diffraction (XRD) analysis indicated that the crystalline size of the ball milled Al 5083 matrix was observed to be ～25 nm and it was coarsened up to ～30 nm after SPS. Nano indentation results of nano composites demonstrated a high hardness of ～280 HV with an elastic modulus of 126 GPa. Wear and friction characteristics with addition of SiC p reinforcement exhibited significant improvement in terms of coefficient of friction and specific wear rate to that of nano structured Al 5083 alloy. The reduction in specific wear rate in the nanocomposite was mainly due to the change of wear mechanism from adhesive to abrasive wear with the addition of SiC p which resulted in high hardness associated with nano-grained microstructure.     

Analytic solution for planar indeterminate impact problems using an energy constraint

This work proposes an analytic method for resolving planar multi-point indeterminate impact problems for rigid-body systems. An event-based approach is used to detect impact events, and constraints consistent with the rigid-body assumption are used to resolve the indeterminacy associated with multi-point impact analysis. The work-energy relation is utilized to determine post-impact velocities based on an energetic coefficient of restitution to model energy dissipation, thereby yielding an energetically consistent set of post-impact velocities based on Stronge’s energetic coefficient of restitution for the treatment of rigid impacts. The effect of stick–slip transition is analyzed based on Coulomb friction. This paper also discusses the transition from impact to contact. This analysis is essential for considering the rocking block problem that is used as an example herein. The predictions of the model for the rocking block problem are compared to experimental results published in the literature. An example of a planar ball undergoing two-point impact is also presented.     

Influence of Temperature and Time of Post-weld Heat Treatment on Stress Relief in an 800-mm-Thick Steel Weldment

Ferritic steel weldments are invariably post-weld heat treated for relieving the residual stresses. However, the long duration of post-weld heat treatment (PWHT) required for very thick weldments can adversely affect the mechanical properties and fracture toughness. Thus, there is a need to establish the relative importance of temperature and time of PWHT with respect to stress relief. Accordingly, in the present work, the phenomenon of stress relief (due to PWHT) in an 800-mm-thick steel weldment was investigated using finite element analysis and the results were validated against experimental measurements. An analytical study was also carried out to determine the relative influence of temperature and time of PWHT on stress relief. It was found that time of PWHT plays a more significant role in case of relatively lower PWHT temperatures. It was also found that, for a given value of Hollomon parameter, different combinations of PWHT temperature and time can be employed to achieve the same level of stress relief. A mathematical relationship has been established between Hollomon parameter and magnitude of residual stress after PWHT. It has been shown that residual stress is a monotonically decreasing function of the Hollomon parameter.