New PEEK-WC and PLA membranes for H2 separation

The potentialities of PEEK-WC (thermally treated at 120 °C) and PLA polymers have been studied in the field of membrane technology applied to H₂ separation/purification. In particular, for low/medium temperature operation (80 °C), PEEK-WC membranes (66 μm thick) showed good results in terms of H₂/CH₄ separation, showing an ideal selectivity value higher than 40. Meanwhile, we observed interesting selectivity also for H₂/N₂ and H₂/CO₂ separation, reaching values of 24 and 20, respectively. As expected, for PEEK-WC thermally treated membranes, the H₂ permeating flux increased from 25 to 80 °C and by increasing the transmembrane pressure. Furthermore, H₂ permeability at 80 °C was around 20 barrer. Concerning PLA membranes (26 μm thick), it is worth of noting that this polymer was pioneeristically used in this work as membrane application, showing great results in terms of H₂/CO₂ separation. Indeed, we overcame the Robeson's upper-bound (2008), achieving an ideal selectivity H₂/CO₂ around 25 with an H₂ permeability of 25 barrer. Further advantage due to the utilization of PLA membranes was related to the temperature operations set at ambient conditions, constituting a valuable and cost-effective solution for H₂/CO₂ separation processes via polymeric membrane technology.     

Hydrogen production by silica membrane reactor during dehydrogenation of methylcyclohexane: CFD analysis

A comprehensive computational fluid dynamic model has been developed using COMSOL Multiphysics 5.4 software to predict the behavior of a membrane reactor in dehydrogenation of methylcyclohexane for hydrogen production. A reliable reaction kinetic of dehydrogenation reaction and a permeation mechanism of hydrogen through silica membrane have been used in computational fluid dynamic modeling. For performance comparison, an equivalent traditional fixed bed reactor without hydrogen removal has been also modeled. After model validation, it has been used to evaluate the operating parameters effect on the performance of both the silica membrane reactor and the equivalent traditional reactor as well. The operating temperature ranged between 473 and 553 K, pressure between 1 and 2.5 bar, sweep factor from ?6.22 to 25 and feed flow rate from 1 to 5 × 10^?6 mol/s. The membrane reactor performed better than the equivalent traditional reactor, achieving as best result complete methylcyclohexane conversion and 96% hydrogen recovery.     

The effect of ultra-thin graphite on the morphology and physical properties of thermoplastic polyurethane elastomer composites

Composites of thermoplastic polyurethane (TPU) and ultra-thin graphite (UTG) with concentrations ranging from 0.5 wt.% to 3 wt.% were prepared using a solution compounding strategy. Substantial reinforcing effects with increased loadings are achieved. Compared to neat TPU, values for storage modulus and shear viscosity are enhanced by 300% and 150%, respectively, for UTG concentrations of 3 wt.%. Additionally, an enhancement of thermal properties is accomplished. The crystallization temperature and thermal stability increased by 30 °C and 10 °C, respectively, compared to neat TPU. Furthermore, the use of oxidized UTG (UTGO) with its added functional oxygen groups suggests the presence of chemical interactions between UTG and TPU, which additionally impact on the thermal properties of the corresponding composites. Controlling the oxidation degree, thus offers further possibilities to obtain composites with tailored properties. The presented approach is straightforward, leads to homogeneous TPU-UTG composites with improved materials properties and is especially suitable for commercial UTG materials and further up-scaled production.     

Thermal and electrical conductivity of melt mixed polycarbonate hybrid composites co‐filled with multi‐walled carbon nanotubes and graphene nanoplatelets

In this work, we present thermoplastic nanocomposites of polycarbonate (PC) matrix with hybrid nanofillers system formed by a melt‐mixing approach. Various concentrations of multi‐walled carbon nanotubes (MWCNT) and graphene nanoplatelets (GnP) were mixed in to PC and the melt was homogenized. The nanocomposites were compression molded and characterized by different techniques. Torque dependence on the nanofiller composition increased with the presence of carbon nanotubes. The synergy of carbon nanotubes and GnP showed exponential increase of thermal conductivity, which was compared to logarithmic increase for nanocomposite with no MWCNT. Decrease of Shore A hardness at elevated loads present for all investigated nanocomposites was correlated with the expected low homogeneity caused by a low shear during melt‐mixing. Mathematical model was used to calculate elastic modulus from Shore A tests results. Vicat softening temperature (VST) showed opposite pattern for hybrid nanocomposites and for PC‐MWCNT increasing in the latter case. Electrical conductivity boost was explained by the collective effect of high nanofiller loads and synergy of MWCNT and GnP. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42536.     

Advances on methane steam reforming to produce hydrogen through membrane reactors technology: A review

Methane steam reforming is the most common industrial process used for almost the 50% of the world’s hydrogen production. Commonly, this reaction is performed in fixed bed reactors and several stages are needed for separating hydrogen with the desired purity. The membrane reactors represent a valid alternative to the fixed bed reactors, by combining the reforming reaction for producing hydrogen and its separation in only one stage. This article deals with the recent progress on methane steam reforming reaction, giving a short overview on catalysts utilization as well as on the fundamentals of membrane reactors, also summarizing the relevant advancements in this field.     

Synthetic Activity of Recombinant Whole Cell Biocatalysts Containing 2-Deoxy-D-ribose-5-phosphate Aldolase from Pectobacterium atrosepticum

In nature 2-deoxy-D-ribose-5-phosphate aldolase (DERA) catalyses the reversible formation of 2-deoxyribose 5-phosphate from D-glyceraldehyde 3-phosphate and acetaldehyde. In addition, this enzyme can use acetaldehyde as the sole substrate, resulting in a tandem aldol reaction, yielding 2,4,6-trideoxy-D-erythro-hexapyranose, which spontaneously cyclizes. This reaction is very useful for the synthesis of the side chain of statin-type drugs used to decrease cholesterol levels in blood. One of the main challenges in the use of DERA in industrial processes, where high substrate loads are needed to achieve the desired productivity, is its inactivation by high acetaldehyde concentration. In this work, the utility of different variants of Pectobacterium atrosepticum DERA (PaDERA) as whole cell biocatalysts to synthesize 2-deoxyribose 5-phosphate and 2,4,6-trideoxy-D-erythro-hexapyranose was analysed. Under optimized conditions, E. coli BL21 (PaDERA C-His AA C49M) whole cells yields 99 % of both products. Furthermore, this enzyme is able to tolerate 500 mM acetaldehyde in a whole-cell experiment which makes it suitable for industrial applications.     

T-Cell Response against Varicella Zoster Virus in Patients with Multiple Sclerosis during Relapse and Remission

An association between varicella zoster virus (VZV) and multiple sclerosis (MS) has been reported in Mexican populations. The aim of this study was to compare the response of T cells from MS patients, during relapse and remission, to in vitro stimulation with VZV, adenovirus (AV) and Epstein–Barr virus (EBV). Proliferation and cytokine secretion of T cells from 29 relapsing-remitting MS patients and 38 healthy controls (HC) were analyzed by flow cytometry after stimulating with VZV, AV or EBV. IgG and IgM levels against VZV and EBV were quantified using Enzyme-Linked Immunosorbent Assay. Relapsing MS patients showed a higher percentage of responding CD4+ and CD8+ T cells against VZV compared to AV. In HC and remitting MS patients, proliferation of CD4+ T cells was higher when stimulated with VZV as compared to EBV. Moreover, T cells isolated from remitting patients secreted predominantly Th1 cytokines when cell cultures were stimulated with VZV. Finally, high concentration of anti-VZV IgG was found in sera from patients and controls. The results support previous studies of an VZV-MS association in the particular population studied and provide additional information about the possible role of this virus in the pathogenesis of MS.     

Proton conducting membranes based on sulfonated PEEK-WC polymer for PEMFCs

Proton conducting membranes have been prepared from chloro-sulfonated polyetheretherketone with cardo group polymers at various sulfonation degree via casting solutions using dimethylformamide as a solvent. The proton conductivity of sulfonated polyetheretherketone with cardo group membranes has been evaluated in the temperature range between 80 and 120 °C and the best result of this work has been achieved at 120 °C and sulfonation degree equal to 60% with a value equal to 6.7·10⁻² S/cm. Furthermore, this sample shows an open circuit voltage varying from 0.881 V at 80 °C to 0.867 V at 120 °C, pointing out that the membrane performance is not greatly affected by a temperature variation. Nevertheless, an increase of temperature from 80 to 120 °C makes possible an increase of the cell resistance varying from 0.17 to 0.24 Ω cm². Thus, the present study investigates the performance of sulfonated polyetheretherketone with cardo group membranes in terms of polarization curves, open circuit voltage, cell resistance and proton conductivity in order to propose them for proton exchange membrane fuel cell applications, particularly at T > 100 °C.     

Heptane Dehydrocyclization Over Pt/KL Catalysts Doped with Barium or Lanthanum

Several 1 wt% Pt/KL catalysts doped with different concentrations of either BaO or La₂O₃ were prepared by successive impregnation of a zeolite KL and then characterized by H₂-O₂ titration, TPR, CO–FTIR, TEM-XEDS and XPS. Catalytic activity measurements in the hydroconversion of n-heptane showed that barium highly enhances the aromatization activity of Pt/KL, the more so the higher the barium concentration. The yield to aromatics increases to a lesser degree by adding 1 wt% La, but it is little modified at higher La concentrations. The CO–FTIR results suggest that the promoter effect of barium is related to an electron enrichment of Pt produced by the BaO Pt⁰ interaction which, according to the TEM–XEDS and XPS results, is more favored than the La₂O₃ Pt interaction.     

Simulation of atmospheric phenomena

This paper presents a physically based simulation of atmospheric phenomena. It takes into account the physics of non-homogeneous media in which the index of refraction varies continuously, creating curved light paths. As opposed to previous research on this area, we solve the physically based differential equation that describes the trajectory of light. We develop an accurate expression of the index of refraction in the atmosphere as a function of wavelength, based on real measured data. We also describe our atmosphere profile manager, which lets us mimic the initial conditions of real-world scenes for our simulations. The method is validated both visually (by comparing the images with the real pictures) and numerically (with the extensive literature from other areas of research such as optics or meteorology). The phenomena simulated include the inferior and superior mirages, the Fata Morgana, the Novaya–Zemlya, the Viking's end of the world, the distortions caused by heat waves and the green flash.