Scintillation and beam-wander analysis in an optical ground station-satellite uplink

In an optical communication link between an optical ground station and a geostationary satellite the main problems appear in the uplink and are due to beam wander and to scintillation. Reliable methods for modeling both effects simultaneously are needed to provide an accurate tool with which the robustness of the communication channel can be tested. Numerical tools, especially the split-step method (also referred to as the fast-Fourier-transform beam propagation method), have demonstrated their ability to deal with problems of optical propagation during atmospheric turbulence. However, obtaining statistically significant results with this technique is computationally intensive. We present an analytical-numerical hybrid technique that provides good information on the variance in optical irradiance with an important saving of time and computational resources.     

Aerosol lidar intercomparison in the framework of the EARLINET project. 1. Instruments

In the framework of the European Aerosol Research Lidar Network to Establish an Aerosol Climatology (EARLINET), 19 aerosol lidar systems from 11 European countries were compared. Aerosol extinction or backscatter coefficient profiles were measured by at least two systems for each comparison. Aerosol extinction coefficients were derived from Raman lidar measurements in the UV (351 or 355 nm), and aerosol backscatter profiles were calculated from pure elastic backscatter measurements at 351 or 355, 532, or 1064 nm. The results were compared for height ranges with high and low aerosol content. Some systems were additionally compared with sunphotometers and starphotometers. Predefined maximum deviations were used for quality control of the results. Lidar systems with results outside those limits could not meet the quality assurance criterion. The algorithms for deriving aerosol backscatter profiles from elastic lidar measurements were tested separately, and the results are described in Part 2 of this series of papers [Appl. Opt. 43, 977-989 (2004)]. In the end, all systems were quality assured, although some had to be modified to improve their performance. Typical deviations between aerosol backscatter profiles were 10% in the planetary boundary layer and 0.1 x 10(-6) m(-1) sr(-1) in the free troposphere.     

Results of a 3D seismic survey at the Travale (Italy) test site

In the last 15 years geothermal exploration in Tuscany, Italy, has addressed deep reservoirs (depth ≥ 3000 m), hosted within complex geological systems, such as metamorphic formations and/or intrusive bodies. Reservoir productivity is linked to fractured and permeable zones that are rather confined and not uniformly distributed. In this context, the seismic methods represent one of the most reliable geophysical techniques for locating potential drilling targets. A 3D seismic survey has been acquired at the Travale test site, and its results have been used to develop a geological and structural model of the site, and to identify and characterize fractured zones inside the deep geothermal reservoir. A correlation between a high-amplitude reflector (H marker) and fractured contact-metamorphic rocks has been highlighted. More than 70% of the total geothermal fluid production at the Travale area comes from this seismic marker.     

Obtaining the consensus and inconsistency among a set of assertions on a qualitative attribute

It is well understood how to compute the average or centroid of a set of numeric values, as well as their variance. In this way we handle inconsistent measurements of the same property. We wish to solve the analogous problem on qualitative data: How to compute the “average” or consensus of a set of affirmations on a non-numeric fact, as reported for instance by different Web sites? What is the most likely truth among a set of inconsistent assertions about the same attribute?Given a set (a bag, in fact) of statements about a qualitative feature, this paper provides a method, based in the theory of confusion, to assess the most plausible value or “consensus” value. It is the most likely value to be true, given the information available. We also compute the inconsistency of the bag, which measures how far apart the testimonies in the bag are. All observers are equally credible, so differences arise from perception errors, due to the limited accuracy of the individual findings (the limited information extracted by the examination method from the observed reality).Our approach differs from classical logic, which considers a set of assertions to be either consistent (True, or 1) or inconsistent (False, or 0), and it does not use Fuzzy Logic.     

Influence of the elaboration process on the peptide fraction with angiotensin I-converting enzyme inhibitor activity in sparkling wines and red wines aged on lees

The influence of some variables on the manufacturing process for sparkling and red wines on the angiotensin I-converting enzyme inhibitory (ACEI) activity has been studied. Ageing on lees significantly influenced the angiotensin I-converting enzyme inhibitor activity in sparkling wines. It reached maximum values at 9 months, decreasing afterwards. In red wines, the ACEI activity also increased in the wines aged on lees. In both wines, hydrophobic peptides were responsible for the ACEI activity. These peptides would make a much greater contribution to the total activity if present in higher proportions. It would therefore be advantageous to increase their concentrations in wines, either by using starting materials with high initial peptide contents or by using a highly autolytic yeast, giving a greater degree of hydrolysis of wine proteins, and higher concentrations of peptides with ACEI activity.     

Applying physical input–output tables of energy to estimate the energy ecological footprint (EEF) of Galicia (NW Spain)

Nowadays, the achievement of sustainable development constitutes an important constraint in the design of energy policies, being necessary the development of reliable indicators to obtain helpful information about the use of energy resources.     

Effect of wood species on corrosion behavior of carbon steel and stainless steels in black liquors

Black liquors produced by pulping different wood species can have different corrosivity towards carbon steel equipment in pulp mills. Inorganic constituents of black liquor alone do not correlate well with the corrosivity of different black liquors. Organic constituents of the black liquor have significant effect on determining its corrosivity. However, understanding of the role of individual organic constituents or group of constituents of black liquors in overall black liquor corrosivity is generally lacking. The objective of this study was to determine the effect selected wood species on the corrosivity of their black liquors which contained similar inorganic constituents. The role of black liquor constituent, pyrocatechols, whose presence in the black liquor has been associated with an increase in corrosion of carbon steel, was also studied. Results from electrochemical tests point to the mechanisms by which the catechols may participate in the accelerated corrosion of carbon steels. This study demonstrates the role of organic constituents of the black liquor in determining its corrosivity.     

Morphology,mechanical performance,and nanoindentation behavior of injection molded PC/ABS‐MWCNT nanocomposites

In this work, nanocomposites of polycarbonate/acrylonitrile‐butadiene‐styrene (PC/ABS) with various loads of multiwall carbon nanotubes (MWCNT) are investigated. Material is previously formed by masterbatch dilution approach and further processed by injection molding at various velocities. Microscopic characterization of nanocomposites morphology reveals stronger dependence of MWCNT dispersion on processing parameters at higher nanofiller load. Dispersion of carbon nanotubes at various distances from the injection gate is studied by Raman spectroscopy showing lower deviation at elevated injection velocity. Nanoindentation results that are in agreement with uniaxial tensile testing show a slight decrease of nanocomposites' mechanical performance at 3.0 wt % MWCNT in samples injected at reduced velocity. This is explained by the increase of agglomeration behavior at these conditions. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42014.     

Aflatoxin M1 in pasteurized and ultrapasteurized milk with different fat content in Mexico

High per capita milk consumption in Mexico indicated a strong need for documentation of aflatoxin M1 (AFM1) levels in milk. A survey of 580, 2-liter samples (n = 290), was conducted to quantify AFM1 using high-performance liquid chromatography, considering two maximum tolerance levels (0.05 and 0.5 microg/liter). We relate aflatoxin levels in the seven most consumed brands from different regions, with two processes (pasteurized and ultrapasteurized), different expiration dates, and different fat content: whole fat (28, 30, and 33 g), half-skimmed (10, 16, and 20 g), light (1, 2, and 4 g), and with vegetable oil. Pasteurization and ultrapasteurization did not diminish AFM1 contamination present at levels of 0 to 8.35 microg/liter in 40% of the milk samples at concentrations > or = 0.05 microg/liter and in 10% of the samples at > or = 0.5 microg/liter. Statistically significant relationships were AFM1 contamination with brand (P = 0.002 at the > or = 0.05 microg/liter level and P = 0.034 at the > or = 0.5 microg/ liter level) and higher AFM1 levels with mild or warm seasons of the year (P = 0.0003). Samples with greater fat content had slightly more probability (P = 0.067) of being contaminated by AFM1 at the > or = 0.5 microg/liter level. The milk with the lowest contamination of AFM1 was a brand imported as powder and rehydrated in Mexico.