Glomerular haemodynamics during renal artery clamping and haemorrhage in the dog

The influence of gradual decline in renal perfusion pressure (RPP) due either to renal artery clamping (C) or to haemorrhagic hypotension (HH) was studied using micropuncture techniques in anaesthetized dogs. The decrease in renal blood flow (RBF) was more profound and set in earlier during HH than during C, where perfect autoregulation was observed down to a mean arterial blood pressure of 85 mmHg. Glomerular filtration rate (GFR) was also only slightly decreased during C, with no change in filtration fraction (FF); again, a much greater decrease in GFR with an increase in FF was seen in HH. The excretion of water, electrolytes and urea were also more decreased during HH than during C. Similar changes were seen at the single nephron (SN) level. Opposite changes were observed in arteriolar resistances: during C a decrease in total arteriolar resistance (RT) amounting to -22% at a RPP of 84 mmHg and -13% at 60 mmHg was seen, due exclusively to a drop in afferent resistance (RA), but during HH there was a significant increase in RT by +36% at RPP of 110 mmHg, +39% at 85 mmHg and +68% at 60 mmHg. This increase was mainly due to an increase in efferent resistance (RE) rather than in RA: +42 vs. +31%, respectively, at 110 mmHg and +67 vs +19% respectively, at 85 mmHg. It was not until a RPP of 60 mmHg was reached that this difference between RE and RA disappeared, being +67% for RE and +69% for RA. The ultrafiltration coefficient, Kf, did not change during C and only decreased slightly with the biggest drop in RPP during HH (2.84 microliters mmHg-1 min-1 during HH vs. 4.19 microliters mmHg-1 min-1 before HH). The SNGFR/GFR ratio remained unchanged during C but declined with decreasing RPP during HH, which probably indicates a 'redistribution' of RBF to the deeper regions of the renal cortex. In conclusion, major differences in renal function were observed between C and HH whose cause is unknown.     

A Comparison of Digital Algorithms Used in Computing the Derivative of Left Ventricular Pressure

Five commonly used algorithms for digital differentiation are evaluated to determine how they perform in the presence of 8, 12, and 16 bit quantization noise. The algorithms are compared on the basis of rms error between a model derivative of the left ventricular pressure waveform and the approximate results of each algorithm. Algorithms based on interpolating techniques introduced the least amount of error when 16 bit data were used while algorithms based on least-squares data fit methods performed best on the less accurate 8 bit data. Some of the band-limiting characteristics of the algorithms are also discussed.     

Analytic solution of the anisotropic bidomain equations for myocardial tissue: the effect of adjoining conductive regions

The anisotropic bidomain model for the propagation of electrical activation in the human myocardium H consists of coupled elliptic-parabolic partial differential equations for the transmembrane potential Vm, intracellular potential phi(i), and extracellular potential phi(e) in H, together with quasi-static equations for the potential distribution phiB in the surrounding (passive) isotropic extracardiac regions B. Four local parameters sigma((i,e) (l,t)) specify the conductivities in the longitudinal (l) and transverse (t) directions with respect to cardiac muscle fibers. Continuous current flow is required at the interface S(H) between H and B. We derive analytic formulas for Vm, phi(e), phi(i), and phiB for plane wave propagation in a uniformly anisotropic slab surmounted by a homogeneous region of conductivity sigmaB. No assumptions are required regarding the anisotropy ratios of the conductivity coefficients. The properties of these solutions are examined with a view to providing insight into the effect of the passive region B on the propagation of Vm and phi(e) in H. We show that for a suitably chosen boundary condition, the problem can be reduced to solving the bidomain equations in H alone.     

Synthesis and crystal structure of the singly tucked-in derivative of bis(phenyltetramethylcyclopentadienyl)titanium

Thermolysis of [TiMe₂(η⁵-C₅Me₄Ph)₂] (4) at 145 °C for 5 h afforded the singly tucked-in paramagnetic titanocene [Ti(III)(η⁵-C₅Me₄Ph){η⁵:η¹-C₅Me₃Ph(CH₂)}] (9). In distinction to the singly tucked-in permethyltitanocene [Ti(III)(η⁵-C₅Me₅){η⁵:η¹-C₅Me₄(CH₂)}] (1) which was found crystallographically disordered [J.M. Fischer, W.E. Piers, V.G. Young, Jr., Organometallics 15 (1996) 2410] the single crystal X-ray diffraction analysis of 9 afforded molecular parameters with nearly by one order better precision as measured by esd-values.     

Spatial resolution of body surface potential maps and magnetic field maps: a simulation study applied to the identification of ventricular pre-excitation sites

Telemedicine is defined as the "delivery of health care and sharing of medical knowledge over a distance using telecommunication systems." The concept of telemedicine is not new. Beyond the use of the telephone, there were numerous attempts to develop telemedicine programs in the 1960s mostly based on interactive television. The early experience was conceptionally encouraging but suffered inadequate technology. With a few notable exceptions such as the telemetry of medical data in the space program, there was very little advancement of telemedicine in the 1970s and 1980s. Interest in telemedicine has exploded in the 1990s with the development of medical devices suited to capturing images and other data in digital electronic form and the development and installation of high speed, high bandwidth telecommunication systems around the world. Clinical applications of telemedicine are now found in virtually every specialty. Teleradiology is the most common application followed by cardiology, dermatology, psychiatry, emergency medicine, home health care, pathology, and oncology. The technological basis and the practical issues are highly variable from one clinical application to another. Teleradiology, including telenuclear medicine, is one of the more well-defined telemedicine services. Techniques have been developed for the acquisition and digitization of images, image compression, image transmission, and image interpretation. The American College of Radiology has promulgated standards for teleradiology, including the requirement for the use of high resolution 2000 x 2000 pixel workstations for the interpretation of plain films. Other elements of the standard address image annotation, patient confidentiality, workstation functionality, cathode ray tube brightness, and image compression. Teleradiology systems are now widely deployed in clinical practice. Applications include providing service from larger to smaller institutions, coverage of outpatient clinics, imaging centers, and nursing homes. Teleradiology is also being used in international applications. Unresolved issues in telemedicine include licensure, the development of standards, reimbursement for services, patient confidentiality, and telecommunications infrastructure and cost. A number of states and medical boards have instituted policies and regulations to prevent physicians who are not licensed in the respective state to provide telemedicine services. This is a major impediment to the delivery of telemedicine between states. Telemedicine, including teleradiology, is here to stay and is changing the practice of medicine dramatically. National and international communications networks are being created that enable the sharing of information and knowledge at a distance. Technological barriers are being overcome leaving organizational, legal, financial, and special interest issues as the major impediments to the further development of telemedicine and realization of its benefits.     

Comments on "Observation of the surface stress induced in microcantilevers by electrochemical redox processes" by F. Tian, J.H. Pei, D.L. Hedden, G.M. Brown, T. Thundat

Critical remarks have been formulated in connection with the surface stress measurements reported by Tian et al. It has been shown that due to the shortcomings of the experimental procedure some conclusions of the authors are hardly acceptable.     

Determination of green fluorescent protein by ultraviolet-excited gel imaging

The green fluorescent protein has gained interest in bioanalytical applications due to its visible fluorescence. As the usage of green fluorescent protein increases, more appropriate fluorescence instrumentation is required. Most fluorescence instrumentation uses ultraviolet light as the excitation source for the determination of green fluorescent protein. However, ultraviolet radiation may damage biological molecules and affect the quantitative analysis. In this study, the effects of the ultraviolet radiation period and the mass of green fluorescent protein on the fluorescence determination were characterized using gel imaging. The ultraviolet illumination period affected the green fluorescent protein fluorescence intensity. The fluorescence increased with the ultraviolet illumination time from 30–90 s. However, the fluorescence intensity decreased when the excitation period was longer, probably due to photobleaching. The photobleaching decreased when a higher concentration of enhanced green fluorescent protein was employed. This gel imaging study has provided a better understanding of the optimum conditions for the determination of green fluorescent protein.     

Nitro-Deficient Niclosamide Confers Reduced Genotoxicity and Retains Mitochondrial Uncoupling Activity for Cancer Therapy

Niclosamide is an oral anthelmintic drug, approved for use against tapeworm infections. Recent studies suggest however that niclosamide may have broader clinical applications in cancers, spurring increased interest in the functions and mechanisms of niclosamide. Previously, we reported that niclosamide targets a metabolic vulnerability in p53-deficient tumours, providing a basis for patient stratification and personalised treatment strategies. In the present study, we functionally characterised the contribution of the aniline 4′-NO₂ group on niclosamide to its cellular activities. We demonstrated that niclosamide induces genome-wide DNA damage that is mechanistically uncoupled from its antitumour effects mediated through mitochondrial uncoupling. Elimination of the nitro group in ND-Nic analogue significantly reduced γH2AX signals and DNA breaks while preserving its antitumour mechanism mediated through a calcium signalling pathway and arachidonic acid metabolism. Lipidomics profiling further revealed that ND-Nic-treated cells retained a metabolite profile characteristic of niclosamide-treated cells. Notably, quantitative scoring of drug sensitivity suggests that elimination of its nitro group enhanced the target selectivity of niclosamide against p53 deficiency. Importantly, the results also raise concern that niclosamide may impose a pleiotropic genotoxic effect, which limits its clinical efficacy and warrants further investigation into alternative drug analogues that may ameliorate any potential unwanted side effects.     

Simulation of vacuum distillation to produce alcohol-free beer

Several processes have been developed for producing alcohol-free beer while maintaining desirable sensory characteristics. One of the most popular thermal processes used is distillation, where not only ethanol but volatile aromatic components are partly or completely removed from the beer. Based on data from the literature and using the Aspen Plus simulator, this study evaluates and compares the aroma profiles of alcohol-free beers obtained by continuous vacuum distillation with different pressures and processes. Three processes were simulated at pressures of 60, 102, and 200 mbar. The first (Process A) was a standard continuous vacuum distillation, where the bottom product was an alcohol-free beer. In the second (Process B), the bottom product was blended with a standard beer that had not undergone any thermal process. In the third (Process C), part of the top stream was mixed with the bottom product. This study considered eight major compounds in beer: ethanol, propanol, isobutanol, 2-methyl-1-butanol, 3-methyl-1-butanol, ethyl acetate, diacetyl and isoamyl acetate. The three simulated pressure ranges showed similar results, indicating that reducing the pressure below 200 mbar did not improve separation. Further, vacuum distillation did not remove diacetyl from the beer. Processes B and C resulted in beer that was richer in flavour compounds. Furthermore, when these processes were compared to Process A, the concentration of esters was markedly higher. © 2019 The Institute of Brewing & Distilling     

Preparation and Characterization of Kenaf Papers Reinforced with Tapioca Starch: Physicomechanical and Morphological Properties

The present study reports the preparation and characterization of kenaf papers that reinforced with tapioca starch by using the ammonium zirconium (IV) carbonate as coupling agent. The examination shows the tearing resistance, tensile strength, and Young’s modulus of the kenaf papers are enhanced with the addition of starch and coupling agent, up to 3% and 1%, respectively. Under the optimum formulation, the degree of coupling reaction is 87%. The Fourier transform infrared and morphological analyses confirm the performance enhancement of kenaf papers is achieved via the formation of chemical bonding between the kenaf fiber and tapioca starch.