Theoretical calculations of the surface tension of Ag(1−x)-Cu(x) liquid alloys

The surface tension of silver-copper binary liquid alloys is calculated, in the frame work of Eyring theory. The calculations were made for different compositions (mole fraction, x_Cu = 0, 0.2, 0.4, 0.6, 0.8 and 1), in the temperature range 1100-1800 K. The surface tension decreases with temperature increase, at a fixed copper fraction x_Cu, and increases with increasing copper content. The calculated results are appropriately compared with existing literature data.     

Error evaluation on experimental stress–strain curve obtained from tube bulging test

To get precise material data for advanced numerical modelling of tube hydroforming process, the tube bulging test is recommended. Stresses and strains in the tube cannot be evaluated easily and several approaches have been proposed. A review is proposed and points out their advantages and drawbacks.     

Transport Properties of K_xV_2O_5·nH_2O Nanocrystalline Films

Five different compositions of K x V 2 O 5 ·nH 2 O(where x=0.00,0.0017,0.0049,0.0064 and 0.0091 mol) were prepared by the sol-gel process.Electrical conductivity and thermoelectric power were measured parallel to the substrate surface in the temperature range of 300-480 K.The electrical conductivity showed that all samples were semiconductors and that conductivity increased with increasing K content.The conductivity of the present system was primarily determined by hopping carrier mobility.The carrier density was evaluated as well.The conduction was confirmed to obey non-adiabatic small polaron hopping.The thermoelectric power or Seebeck effect,increased with increasing K ions content.The results obtained indicated that an n-type semiconducting behavior within the temperature range was investigated.     

Choice of a pertinent color space for color texture characterization using parametric spectral analysis

This article presents a comparison of different color spaces including RGB, IHLS and L?a*b* for color texture characterization. This comparison is based on the fusion of the independent spatial structure and color feature cues. In IHLS and L*a*b*, two channel complex color images are created from the luminance and the chrominance values. For such images, two dimensional complex multichannel linear prediction models are used to perform parametric power spectrum estimation and the structure feature cues are computed from this estimated power spectrum. Quantitative comparison of auto spectra of luminance and combined chrominance channels for different color spaces is done. This comparison is based on the degree of decorrelation between luminance and chrominance information provided by different color space transformations. Three dimensional histograms are used as color feature cues. Then, to classify color textures, Kullback-Leibler divergence based symmetric distance measures are calculated for pure color, luminance structure and chrominance structure feature cues. Individual as well as combined effect of information from all feature cues on classification results is then compared for different color spaces and different color texture data sets. The proposed color texture classification method performs better than the state of the art methods in certain cases. The L*a*b* color space gives us a better characterization of the chrominance spatial structure as well as the overall spatial structure for all of the chosen data sets. Experimental results on pixel classification of color textures are also presented and discussed.     

Desorption kinetics of trichloroethylene and perchloroethylene from aged dense nonaqueous phase liquid-contaminated soil

Batch experiments were conducted to investigate the desorption kinetics of a contaminated soil collected from a field site at Hill Air Force Base (AFB), Utah. The site has been contaminated with many dense nonaqueous phase liquids (DNAPLs), primarily trichloroethylene (TCE) and perchloroethylene (PCE), for more than 60 years. Similar desorptive behaviour of both TCE and PCE was observed: a stage of fast release of the contaminant at the start followed by a very slow stage. Moreover, it is suggested that not all the contaminant in the solid phase may be released to the aqueous phase, apparently due to the age factor. Local variations were observed in the effective diffusivity and other sorption-related parameters across the site due to aquifer heterogeneity. Experimental results were then simulated using a numerical code based on the intraparticle diffusion model. Good agreement was found between both results.     

Robust control of an isolated hybrid wind-diesel power system using Linear Quadratic Gaussian approach

This paper presents the application of the Linear Quadratic Gaussian (LQG) controller for voltage and frequency regulation of an isolated hybrid wind-diesel scheme. The scheme essentially consists of a vertical axis wind turbine driving a self-excited induction generator connected via an asynchronous (AC-DC-AC) link to a synchronous generator driven by a diesel engine. The synchronous generator is equipped with a voltage regulator and a static exciter. The wind generator and the synchronous generator together cater for the local load and power requirement. However, the load bus voltage and frequency are governed by the synchronous generator. The control objective aims to regulate the load voltage and frequency. This is accomplished via controlling the field voltage and rotational speed of the synchronous generator. The complete nonlinear dynamic model of the system has been described and linearized around an operating point. The standard Kalman filter technique has been employed to estimate the full states of the system. The computational burden has been minimized to a great extent by computing the optimal state feedback gains and the Kalman state space model off-line. The proposed controller has the advantages of robustness, fast response and good performance. The hybrid wind diesel energy scheme with the proposed controller has been tested through a step change in both wind speed and load impedance. Simulation results show that accurate tracking performance of the proposed hybrid wind diesel energy system has been achieved.     

Analysis and Optimization of Noise in Bipolar RF Harmonic Mixers

A noise analysis of bipolar harmonic mixers (BHM) used for direct-conversion receivers is presented in this paper. Analytical and simulated results for the transfer function of the mixer are presented. Simple analytical expressions describing noise contribution from all sources are derived. Estimation of flicker noise quite agrees with harmonic-balance simulation results. Based on the derived expressions, total time average noise power spectral density (PSD) at the output is compared with simulation results. For the recommended regions of operation, error is less than 20%. The overall BHM noise figure (NF) is calculated and optimized based on a simple extracted formula. Errors introduced by analysis remain within a 1.5-dB margin with respect to simulation results. The validity of analysis for high frequencies is justified. The effect of flicker noise coefficient on the overall mixer NF is compared for different available processes.     

FPGA architecture of the LDPS Motion Estimation for H.264/AVC Video Coding

Motion estimation is a highly computational demanding operation during video compression process and significantly affects the output quality of an encoded sequence. Special hardware architectures are required to achieve real-time compression performance. Many fast search block matching motion estimation (BMME) algorithms have been developed in order to minimize search positions and speed up computation but they do not take into account how they can be effectively implemented by hardware. In this paper, we propose three new hardware architectures of fast search block matching motion estimation algorithm using Line Diamond Parallel Search (LDPS) for H.264/AVC video coding system. These architectures use pipeline and parallel processing techniques and present minimum latency, maximum throughput and full utilization of hardware resources. The VHDL code has been tested and can work at high frequency in a Xilinx Virtex-5 FPGA circuit for the three proposed architectures.     

Highly Conductive Poly(3,4‐ethylenedioxythiophene):Poly (styrenesulfonate) Films Using 1‐Ethyl‐3‐methylimidazolium Tetracyanoborate Ionic Liquid

Highly conductive poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films are obtained using ionic liquids as additives. Upon adding 1‐ethyl‐3‐methylimidazolium tetracyanoborate (EMIM TCB) to the conducting polymer, the conductivity increases to 2084 S cm^?1; this is attributed to the phase separation of PSS leading to a structural change in the film. A comparative study with 1‐butyl‐3‐methyl imidazolium tetrafluoroborate (BMIM BF₄) shows that EMIM TCB gives higher conductivity and transmittance and can be regarded as one of the most promising additives for the preparation of indium tin oxide (ITO)‐free organic devices using PEDOT:PSS/EMIM TCB as electrodes.