Contention aware mobility prediction routing for intermittently connected mobile networks

This paper introduces a novel multi-copy routing protocol, called predict and forward (PF), for delay tolerant networks, which aims to explore the possibility of using mobile nodes as message carriers for end-to-end delivery of the messages. With PF, the message forwarding decision is made by manipulating the probability distribution of future inter-contact and contact durations based on the network status, including wireless link condition and nodal buffer availability. In particular, PF is based on the observations that the node mobility behavior is semi-deterministic and could be predicted once there is sufficient mobility history information. We implemented the proposed protocol and compared it with a number of existing encounter-based routing approaches in terms of delivery delay, delivery ratio, and the number of transmissions required for message delivery. The simulation results show that PF outperforms all the counterpart multi-copy encounter-based routing protocols considered in the study.     

Influence of Ag micro-particle additions on the microstructure, hardness and tensile properties of Sn-9Zn binary eutectic solder alloy

In this study, an addition of Ag micro-particles (8-10 μm) with a content in the range between 0 and 1.5 wt.% to Sn-9Zn eutectic solder, were examined in order to understand the effect of Ag additions as the particulate reinforcement on the microstructural and mechanical properties as well as the thermal behavior of the newly developed composite solders. Here, an approach to prepare a micro-composite solder alloy by mixing Ag micro-particles with a molten Sn-Zn solder alloy was developed. The composite solder was prepared by mechanically mixing Ag micro-particles into the Sn-9Zn alloy melt to ensure a homogeneous distribution of the reinforcing particles. The distribution of the Ag micro-particles in the matrix was found to be fairly uniform. The Ag particles reacted with the Zn and formed ε-AgZn₃ intermetallic compounds (IMC) in the β-Sn matrix. It was found that the more Ag particles added to the Sn-9Zn solder, the more Ag-Zn compound formed. In the Sn-9Zn/XAg composite solder, the microstructure was composed of AgZn₃ IMC and α-Zn phase in the β-Sn matrix. Interestingly, as the Ag particles in the composite solder increased, the α-Zn phase was found to be depleted from the matrix. The average tensile strength of the composite solders increased with the Ag micro-particles content up to a certain limit. Beyond this limit, the addition of Ag particles actually decreased the strength.     

Scattering of Electromagnetic Waves by a Coated Nihility Cylinder

An analytical solution for the scattering of electromagnetic plane waves from an infinitely long nihility cylinder, coated with a double positive (DPS), double negative (DNG), epsilon negative (ENG), or mu negative (MNG) layer of uniform thickness is presented. The solution is determined by solving the scalar wave equation in the cylindrical coordinates, for different regions and applying the appropriate boundary conditions at the interfaces. Both TM and TE polarizations as incident plane have been considered in the analysis. Comparison of behaviors of a coated nihility cylinder with a coated PEC cylinder has been made. It is noted that two situations are more closer for DNG coating as compared to DPS coating.     

Multiwavelength erbium-doped fiber Fabry-Pe/spl acute/rot laser and its uniform spectral lines power operation

Multiwavelength erbium-doped fiber laser by means of phase modulation in a linear cavity configuration is presented. Stable multiwavelength lasing is achieved by applying any one of the waveforms of sine, square, sawtoothed, and triangular at a suitable frequency between 500 Hz to a few tens of kilohertz to the phase modulator. The output spectral lines power equalization is performed by adjusting the frequency to drive the all-fiber phase modulator and the polarization controller or dc offset voltage of a LiNbO/sub 3/ amplitude modulator, which is incorporated in a polarization-maintaining fiber Lyot-Sagnac filter.     

A New Adaptive Beamforming of Multiband Fractal Antenna Array in Strong-Jamming Environment

This paper proposes, for the first time, a new radiation pattern synthesis for fractal antenna array that combines the unique multi-band characteristics of fractal arrays with the adaptive beamforming requirements in wireless environment with high-jamming power. In this work, a new adaptive beamforming method based on discrete cbKalman filter is proposed for linear Cantor fractal array with high performance and low computational requirements. The proposed Kalman filter-based beamformer is compared with the Least Mean Squares (LMS) and the Recursive Least Squares (RLS) techniques under various parameter regimes, and the results reveal the superior performance of the proposed approach in terms of beamforming stability, Half-Power Beam Width (HPBW), maximum Side-Lobe Level (SLL), null depth at the direction of interference signals, and convergence rate for different Signal to Interference (SIR) values. Also, the results demonstrate that the suggested approach not only achieves perfect adaptation of the radiation pattern synthesis at high jamming power, but also keep the same SLL at different operating frequencies. This shows the usefulness of the proposed approach in multi-band smart antenna technology for mobile communications and other wireless systems.

     

A Dempster–Shafer Based Tit-for-Tat Strategy to Regulate the Cooperation in VANET Using QoS-OLSR Protocol

In this paper, we address the problem of cooperation among vehicles in VANET using QoS-OLSR protocol in the presence of selfish nodes. QoS-OLSR is a proactive protocol that considers the Quality of Service (QoS) of the nodes while electing the cluster-heads and selecting the Multi-Point Relay (MPRs) nodes. Cluster-heads and MPRs might misbehave on the roads by over-speeding or under-speeding. Classical and generous Tit-for-Tats are proposed to analyze the interaction among vehicles. However, both strategies are not able to enforce the cooperation due the fact that they (1) count on individual watchdogs monitoring, (2) rely on the node-to-node cooperation decision, (3) and ignore the high mobility and packet collisions. Therefore, we propose a Dempster–Shafer based Tit-for-Tat strategy that is able to improve the decision and regulate the cooperation in the vehicular network. This is done by (1) launching a cooperative watchdogs monitoring, (2) correlating the observations of the different watchdogs using Dempster–Shafer theory, and (3) propagating the decisions among clusters. Thereafter, we compare the Dempster–Shafer based strategy with several strategies derived from the original Tit-for-Tat. Simulation results prove that the Dempster–Shafer based strategy is able to maintain the survivability of the vehicular network in the presence of high mobility and packet collisions with minimal time and overhead.     

Narrow line semiconductor laser using fibre grating

A narrow linewidth, low chirp, wavelength selectable, packaged alternative to current DFB structures has been developed which employs a fibre reflection grating incorporated in the fibre pigtail. The wavelength of the packaged device can be determined by the appropriate choice of fibre grating coupled to the antireflection coated facet of a 1.55 mu m BH laser. Linewidths of less than 50 kHz, sidemode suppression of more than 30 dB and chirp when modulated at 1.2 Gbit/s of <0.5 MHz have been demonstrated.<>     

An adaptive array processor with robustness and broad-band capabilities

A new type of receiving array which adaptively minimizes ouput noise power while simultaneously satisfying certain robustness and/or bandwidth criteria is considered. The resulting array gains are shown to be robust against direction uncertainty in the assumed look direction, against wavefront distortions and against array geometry errors. The robustness property is incorporated directly into the adaption algorithm via constraints. Extensive simulation has established very satisfactory performance of this new algorithm, both as a limited broad-band processor and as a robust narrow-band processor.     

A second-order blind source separation method for bilinear mixtures

In this paper, we are interested in the problem of Blind Source Separation using a Second-order Statistics (SOS) method in order to separate autocorrelated and mutually independent sources mixed according to a bilinear (BL) model. In this context, we propose a new approach called Bilinear Second-order Blind Source Separation, which is an extension of linear SOS methods, devoted to separate sources present in BL mixtures. These sources, called extended sources, include the actual sources and their products. We first study the statistical properties of the different extended sources, in order to verify the assumption of identifiability when the actual sources are zero-mean and when they are not. Then, we present the different steps performed in order to estimate these actual centred sources and to extract the actual mixing parameters. The obtained results using artificial mixtures of synthetic and real sources confirm the effectiveness of the new proposed approach.     

Improving PAPR performance of filtered OFDM for 5G communications using PTS

The filtered orthogonal frequency division multiplexing (F-OFDM) system has been recommended as a waveform candidate for fifth-generation (5G) communications. The suppression of out-of-band emission (OOBE) and asynchronous transmission are the distinctive features of the filtering-based waveform frameworks. Meanwhile, the high peak-to-average power ratio (PAPR) is still a challenge for the new waveform candidates. Partial transmit sequence (PTS) is an effective technique for mitigating the trend of high PAPR in multicarrier systems. In this study, the PTS technique is employed to reduce the high PAPR value of an F-OFDM system. Then, this system is compared with the OFDM system. In addition, the other related parameters such as frequency localization, bit error rate (BER), and computational complexity are evaluated and analyzed for both systems with and without PTS. The simulation results indicate that the F-OFDM based on PTS achieves higher levels of PAPR, BER, and OOBE performances compared with OFDM. Moreover, the BER performance of F-OFDM is uninfluenced by the use of the PTS technique.