Optimization of dielectric heating parameters in the production of high‐voltage LiNiPO4‐core and carbon‐shell ceramics

Excellent core‐shell morphology and nanoscale high‐voltage LiNiPO₄@C cathode materials have been synthesized by a low‐level and long‐time microwave and solvothermal synthesis methodology. The effects of the changing physicochemical parameters on the crystal‐quality and electrochemical properties of the products have been evaluated in relation to the cycling stability. X‐ray diffraction analysis shows that it is possible to synthesize phase‐pure LiNiPO₄ material when the reaction parameters are carefully elaborated. High‐resolution transmission electron microscopy analysis reveals a core‐shell morphology with a coating thickness of 6‐8 nm for 30 minutes at 180°C solvothermal temperature and time‐spread microwave energy. This mentioned cathode material exhibits the best electrochemical properties, achieving a discharge capacity of 157 mAh·g^?1 at a 0.l C current rate, and shows a remarkable 81% capacity retention at the end of the 80th cycle.     

Metallo‐supramolecular materials based on terpyridine‐functionalized polyhedral silsesquioxane

In this study, novel metallo‐supramolecular materials based on terpyridine‐functionalized polyhedral silsesquioxane were synthesized from 4′‐chloro‐2,2′:6′,2″‐terpyridine and amino‐group‐functionalized polyhedral oligomeric silsesquioxane. The obtained terpyridine‐functionalized polyhedral silsesquioxanes were converted to metallo‐supramolecular hybrid materials by coordination polycondensation reaction with Co(II) or Cu(II) ions. The supramolecular polymers created were characterized by means of structure, morphology and stimuli‐responsive performance employing scanning electron microscopy, amperometric techniques and UV–visible and Fourier transform IR spectroscopy. UV?visible and cyclic voltammetry studies showed that both the optical and electrochemical properties of metallo‐supramolecular materials are affected by the substituent at the pyridine periphery. The supramolecular polymers obtained exhibited electrochromism during the oxidation processes of cyclic voltammogram studies. As a result, these terpyridine‐functionalized polyhedral silsesquioxanes are good candidates for electronic, opto‐electronic and photovoltaic applications as smart stimuli‐responsive materials. © 2013 Society of Chemical Industry     

Soot formation in high pressure laminar diffusion flames

The details of the chemical and physical mechanisms of the soot formation process in combustion remain uncertain due to the highly complex nature of hydrocarbon flames, and only a few principles are firmly established mostly for atmospheric conditions. In spite of the fact that most combustion devices used for transportation operate at very high pressures (e.g., aircraft gas turbines up to 40 atm, diesel engines exceeding 100 atm), our understanding of soot formation at these pressures is not at a desirable level, and there is a fundamental lack of experimental data and complementary predictive models. The focus of this review is to assess the experimental results available from laminar co-flow diffusion flames burning at elevated pressures. First, a brief review of soot formation mechanisms in diffusion flames is presented. This is followed by an assessment of soot diagnostics techniques, both intrusive and non-intrusive, most commonly used in soot experiments including the laser induced incandescence. Then the experimental results of soot measurements done at elevated pressures in diffusion flames are reviewed and critically assessed. Soot studies in shock tubes and in premixed flames are not covered. Smoke point fuel mass flow rate is revisited, and shortcomings in recent measurements are pointed. The basic requirements for tractable and comparable measurements as a function of pressure are summarized. Most recent studies at high pressures with aliphatic gaseous fuels show that the soot yield displays a unified behaviour with reduced pressure. The maximum soot yield seems to reach a plateau asymptotically as the pressure exceeds the critical pressure of the fuel. Lack of experimental data on the sensitivity of soot morphology to pressure is emphasized. A short summary of efforts in the literature on the numerical simulation of soot formation in diffusion flames at high pressures is the last section of the paper.     

Comparison of lactic acid bacteria diversity during the fermentation of Tarhana produced at home and on a commercial scale

Food Science and Biotechnology - In this study, lactic acid bacteria diversity during the fermentation of homemade and commercially prepared Tarhana, a traditional fermented cereal food from...     

Multi-channel energy detection under phase noise: analysis and mitigation

For the development of highly integrated, flexible and low-cost cognitive radio (CR) devices, simple transceiver architectures, like direct-conversion receiver, are expected to be deployed and provide viable radio frequency (RF) spectrum sensing solutions for practical implementation. Yet, this can be very challenging task especially if spectrum sensing and down-conversion are conducted over multiple RF channels simultaneously for improved efficiency in channel scans. Then, the so-called dirty RF problem that degrades link performance of traditional transmission systems starts to be influential from spectrum sensing perspective as well. The unavoidable RF impairments, e.g., oscillator phase noise in direct-conversion receiver, could generate crosstalk between multiple channels that are down-converted simultaneously, and thus considerably limit the spectrum sensing capabilities. Most of the existing spectrum sensing studies in literature assume an ideal RF receiver and have not considered such practical RF hardware problem. In this article, we study the impact of oscillator phase noise on energy detection (ED) based spectrum sensing in multi-channel direct-conversion receiver scenario. With complex Gaussian primary user (PU) signal models, we first derive the detection and false alarm probabilities in closed-form expression. The analytical results, verified through extensive simulations, show that the wideband multi-channel sensing receiver is very sensitive to the neighboring channel crosstalk induced by oscillator phase noise. More specifically, it is shown that the false alarm probability of multi-channel energy detection increases significantly, compared to the ideal RF receiver case. The exact performance degradation depends on the power of neighboring channels as well as statistical characteristics of the phase noise in the deployed receiver. In order to prevent such performance degradation in spectrum identification, an enhanced energy detection technique is proposed. The proposed technique calculates the leakage power from neighboring channels for each channel and improves the sample energy statistics by subtracting this leakage power from the raw values. An analytical expression is derived for the leakage power which is shown to be a function of power spectral levels of neighboring channels and 3-dB bandwidth of phase noise process. Practical schemes for estimating these two quantities are discussed. Extensive computer simulations show that the proposed enhanced detection yields false alarm rates that are very close to those of an ideal RF receiver and hence clearly outperforms classical energy detection.     

Neural extension of experimental data to investigate using phosphogypsume in light brick production

In this study, usability of wastes produced in phosphoric acid plants in structural brick manufacture has been investigated. There are several parameters involved in using these wastes in brick production namely the rate of added waste, firing speed and firing temperature. The performance of these parameters can be measured by several criteria such as natural drying shortening, water absorption and weight loss. Therefore, so many experiments are needed to investigate the effects of these parameters on the bricks produced with these wastes. The result of a series of experiments were utilized to achieve this end. The results have shown that the industrial wastes considered improve the performance of the bricks in terms of the criteria mentioned above. However, the results have also shown that further investigations are needed to explore the effects of interim values on the performance of the bricks. To achieve that end, a neural experimental study is adopted. For this purpose, the results of the experiments conducted were used to construct an artificial neural network. The trained and tested network was then used to check the effects of 280 different combinations for each type of material mixtures mentioned. The outcome of these artificial tests have provided the optimal values for the waste addition rate, firing speed and firing temperature based on the four criteria mentioned previously.     

Catalytic effect of potassium carbonate on carbothermic production of hexagonal boron nitride

Effect of potassium carbonate addition on the carbothermic formation of hexagonal boron nitride (hBN) was investigated by keeping the K₂CO₃ added B₂O₃+C mixtures in nitrogen atmosphere at 1400 °C for 40–160 min. K₂CO₃ amount was varied in the range of 10–60 wt% of the B₂O₃+C mixture. Products were subjected to XRD and quantitative analyses, SEM and TEM observations, and particle size measurement. Amount of hBN increased considerably with K₂CO₃ addition; also particle size and crystallinity improved. Catalytic role of K₂CO₃ was suggested as forming a potassium borate melt in which hBN particles form, in addition to carbothermic formation reaction. Effect of K₂CO₃ on increasing the hBN amount decreased when it was used over 40%. This was attributed to the rapid evaporation of the formed potassium borate liquid.     

Synthesis and characterization of PMMA composites activated with starch for immobilization of L‐asparaginase

Poly (methyl methacrylate) (PMMA)–starch composites were prepared by emulsion polymerization technique for L‐asparaginase (L‐ASNase) immobilization as highly activated support. The hydroxide groups on the prepared composites offer a very simple, mild and firm combination for enzyme immobilization. The pure PMMA and PMMA‐starch composites were characterized as structural, thermal and morphological. PMMA‐starch composites were found to have better thermal stability and more hydrophilic character than pure PMMA. L‐ASNase was immobilized onto PMMA‐starch composites contained the different ratio of starch (1, 3, 5, and 10 wt %). Immobilized L‐ASNase showed better performance as compared to the native enzyme in terms of thermal stability and pH. K_m value of immobilized enzyme decreased approximately eightfold compared with the native enzyme. In addition to, immobilized L‐ASNase was found to retain 60% of activity after 1‐month storage period at 4 °C. Therefore, PMMA‐starch composites can be provided more advantageous in terms of enzymatic affinity, thermal, pH and storage stability as L‐ASNase immobilization matrix. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43421.