Effect of surface properties of silica nanoparticles on their cytotoxicity and cellular distribution in murine macrophages

In this study, complexes composed of poly-l-tyrosine (pLT) and single-walled carbon nanotubes (SWCNTs) were produced and the dispersibility of the pLT/SWCNT complexes in water by measuring the ζ potential of the complexes and the turbidity of the solution were investigated. It is found that the absolute value of the ζ potential of the pLT/SWCNT complexes is as high as that of SWCNTs modified with double-stranded DNA (dsDNA) and that the complexes remain stably dispersed in the water at least for two weeks. Thermogravimetry analysis (TGA) and visualization of the surface structures of pLT/SWCNT complexes using an atomic force microscope (AFM) were also carried out.     

In situ time-resolved X-ray diffraction of tobermorite formation in autoclaved aerated concrete: Influence of silica source reactivity and Al addition

The hydrothermal formation of tobermorite during the processing of autoclaved aerated concrete was investigated by in situ X-ray diffraction (XRD) analysis. High-energy X-rays from a synchrotron radiation source in combination with a newly developed autoclave cell and a photon-counting pixel array detector were used.To investigate the effects of the silica source, reactive quartz from chert and less-reactive quartz from quartz sand were used as starting materials. The effect of Al addition on tobermorite formation was also studied. In all cases, C-S-H, hydroxylellestadite and katoite were clearly observed as intermediates.Acceleration of tobermorite formation by Al addition was clearly observed. However, Al addition did not affect the dissolution rate of quartz. Two pathways, via C-S-H and katoite, were also observed in the Al-containing system. These results suggest that the structure of initially formed C-S-H is important for the subsequent tobermorite formation reactions.     

Application of CO2 laser heating zone drawing and zone annealing to nylon 6 fibers

Nlon 6 fibers were zone drawn and zone annealed by using a continuous wave carbon dioxide laser to develop their mechanical properties. A laser‐heating zone drawing was carried out under a applied tension of 35.4 MPa at a power density of 9.65 W · cm^?2, and then the zone‐drawn fiber was annealed. A laser‐heating zone annealing was carried out in two steps at a power density of 9.65 W · cm^?2; the first step was carried out under 423 MPa and the second under 517 MPa. The treating temperature of the fiber heated by the CO₂ laser was measured by using an infrared thermographic camera equipped with a magnifying lens. The treating temperature at the zone drawing is 138°C, and those at the first and the second zone annealing are 121 and 125°C, respectively. The second laser‐heated zone‐annealed fiber has a birefringence of 65.2 × 10^?3, a degree of crystallinity of 54%, and a storage modulus of 21 GPa at 25°C. Wide‐angle X‐ray diffraction patterns for the laser‐heated zone‐drawn and the zone‐annealed fibers show (200) reflection and (002/202) doublet due to only an α form on the equator. The laser‐heated zone‐drawn fiber has a melting endotherm peaking at 216°C and a trace of shoulder on the higher temperature side of its peak, and the laser‐heated zone‐annealed fibers have a single melting endotherm peaking at 216°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1711–1716, 2002     

Ethanol production from raw starch by a recombinant yeast having saccharification and fermentation activities

In order to develop a method for converting raw starch into ethanol efficiently, direct fermentation of ozonized raw starch using a recombinant yeast was investigated. Ozonolysis was carried out as a pretreatment to convert raw starch into ethanol rapidly and efficiently, and then the effect of the ozone degradation conditions on the degree of polymerization and the amount of amylose in a raw starch was determined. Since the degree of polymerization was low and the amount of amylose was high, raw starch treated with an ozone concentration of 40 gm^?3 and an ozonation time of 30 min was the material chosen for alcohol fermentation. Though the recombinant yeast could not convert the untreated raw starch, it converted the soluble starch and the ozonized raw starch at a comparatively high yield into ethanol. About 56% of the ozonized raw starch decomposed, and the ethanol concentration obtained from the ozonized raw starch was markedly greater than that obtained from untreated raw starch. The dynamic behavior of cell growth, substrate degradation, and ethanol production was examined in a continuous culture under various dilution rates, and the optimal dilution rate, ie 0.15 h^?1, was determined for maximizing the ethanol productivity (amount of ethanol produced per unit time). © 2002 Society of Chemical Industry     

Properties of graphite prepared from boron-doped pitch as an anode for a rechargeable Li ion battery

Boron-doped graphites were derived from a naphthalene-based pitch mixed with para-xylene glycol (PXG) or dimethyl para-xylene glycol (DMPXG) as a cross-linking agent and three types of boron-containing compounds as a graphitization catalyst, and their anode performances were investigated. The structural analysis of the obtained graphites revealed that PXG functioned mainly as a two-dimensional cross-linking agent during the heat treatment process and DMPXG functioned partially as a three-dimensional. The average interlayer spacing decreased and lattice constant, a₀, and graphitizability increased with increasing the amount of boron atoms added. The result indicated that the carbon atoms were replaced by boron atoms. The anode performance was improved by the enhancement of graphitizability. The structural parameters and anode performance of boron-doped graphites did not depend on the kind of boron-containing compounds but the amount of boron atoms added in pitch and the kind of cross-linking agent.     

Heavy oil sorption and recovery by using carbon fiber felts

On fibrous carbon materials, including activated carbon fibers, sorption capacity for heavy oils, less viscous A-grade and more viscous C-grade, was determined. Sorption capacity depended strongly on their bulk density; the correlation was the same as that found previously on exfoliated graphite and carbonized fir fibers. On carbon fiber felts, excellent recycling performance was observed, though sorption capacity was not so high as on exfoliated graphite and carbonized fir fibers. By filtration under suction, about 90% of sorbed A-grade heavy oil could be recovered and no decrease in sorption capacity was detected even after eight cycles. By washing with solvents, n-hexane for A- and C-grade oils and A-grade oil for C-grade oil, almost 100% recovery with no marked reduction in sorption capacity was found for each cycle. For the felts of PAN-based carbon fibers, rather severe operations for oil recovery, centrifugation and squeezing with twisting, could be applied without pronounced decreases in sorption capacity and recovery ratio.     

Effect of agglomeration of triacylglycerols on the stabilization of a model cream

This study has been carried out on solidification of a model cream using palm oil as a sole fat source. It was found that the addition of 1‐palmitoylglycerol to palm oil promoted the solidification of the model cream while the addition of 1‐oleoylglycerol had no such effect. Solid fat content of palm oil in the cream with 1‐palmitoylglycerol was found to be lower than those of palm oil and palm oil with 1‐oleoylglycerol after cooling from 60 to 5 °C. Crystallization behaviors of bulk palm oil and mixture of 1, 3‐dipalmitoyl‐ 2‐oleoyl‐glycerol (POP) and 1‐palmitoyl‐2, 3‐dioleoyl‐glycerol (POO) were then studied in the presence of monoacylglycerols. Formation of granular crystals was observed for palm oil and POP/POO mixture in the presence of 1‐palmitoylglycerol. HPLC of the granular crystals revealed that agglomeration of higher melting point triacylglycerols (TAGs) around 1‐palmitolyglycerol took place, which promoted the formation of granular crystals. It was suggested that the agglomeration of higher melting point TAGs around 1‐palmitoylglycerol which was preferentially adsorbed at the oil‐water interface of oil droplets in the model cream led to destabilization of oil‐in‐water emulsion and the solidification of the model cream. At the same time, it was suggested that the fatty acid moiety of emulsifiers played an important role in the agglomeration of TAGs and stabilization of o/w emulsions.     

Design and synthesis of zero–zero-birefringence polymers in a quaternary copolymerization system

We designed and synthesized quaternary copolymers of methyl methacrylate (MMA), 2,2,2-trifluoroethyl methacrylate (TFEMA), benzyl methacrylate (BzMA), and 3,3,5-trimethylcyclohexyl methacrylate (TMCHMA) and we investigated their birefringence, thermal properties, and other optical properties. When the copolymer composition was MMA/TFEMA/BzMA/TMCHMA = 50:38:8:4, 40:30:7:23, or 30:21:7:42 (wt%), a zero–zero-birefringence polymer that exhibited neither orientational nor photoelastic birefringence was obtained. We demonstrated that such zero–zero-birefringence polymers with a variety of compositions could be successfully prepared in the quaternary system by using the same compensation method as applied in ternary random copolymerization. We also demonstrated that the glass-transition temperature (T_g) and refractive index (n_D) of these copolymers could be controlled with high accuracy while retaining their zero–zero-birefringence property. We can therefore predict the type of birefringence, the T_g, and the n_D of a particular copolymer before polymerization. Zero–zero-birefringence polymers with the most appropriate characteristics can then be synthesized selectively by quaternary copolymerization.     

Counter‐ion‐specific helix formation of poly(γ‐methyl L‐glutamate) derivatives containing sulfonate group in aqueous alcohols

Charged polypeptides containing sulfonate groups were prepared by transesterification of poly(γ‐methyl L ‐glutamate) with isethionic acid. The coil–helix transition of the sulfonated polypeptides was investigated in aqueous alcohols. Marked counter‐ion specificity was observed for helix formation: Li⁺ < Na⁺ < Cs⁺ ≦ Rb⁺ ≦ K⁺; this was different to that for poly(L ‐glutamate) (PLG): Cs⁺ ? K⁺ < Li⁺ < Na⁺. Specific helix stabilization by counter‐ion mixing, which has been found for the PLG system, was not observed for the sulfonated polypeptides. The counter‐ion‐ and solvent‐specific helix formation is discussed and compared with that in PLG. © 2001 Society of Chemical Industry