A new recovery process of carbon dioxide from alkaline carbonate solution via electrodialysis

Bipolar membrane electrodialysis is applied to CO₂ recovery from alkaline carbonate solution. CO₂ in flue gas is captured by an alkaline hydroxide absorbing solution to form an alkaline carbonate solution. The captured CO₂ is recovered from the alkaline carbonate solution via bipolar membrane electrodialysis, and the alkaline solution is regenerated simultaneously. To reduce the power requirement for CO₂ recovery, this study considers optimal design and operation. Three membrane arrangements were compared, and the results indicate the membrane arrangement comprising a bipolar membrane and cation exchange membrane is the most energy saving. With further optimization of operation conditions, the minimum power requirement for CO₂ recovery was reduced to 2.1 MJ/kg‐CO₂ (or 2.1 GJ/t‐CO₂). © 2009 American Institute of Chemical Engineers AIChE J, 2009     

A PAM control method for a matrix converter based on a virtual AC/DC/AC conversion method

In this paper, a novel control method for a matrix converter is proposed. The proposed method is a PAM (Pulse Amplitude Modulation) control method based on a virtual AC/DC/AC conversion method. Output voltage amplitude is controlled by controlling a virtual DC link voltage with a virtual rectifier. Output frequency is controlled by a virtual inverter. First, the proposed method is explained. Next, the validity of the proposed method is confirmed through simulation and experiment using a 750‐W prototype matrix converter. Moreover, various characteristics of the proposed method and conventional virtual AC/DC/AC method are compared through experiment. As a result of the experiment, it has been understood that total harmonic distortion of output current and common‐mode voltage can be reduced compared with the case of using a conventional virtual AC/DC/AC conversion method. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(4): 88–96, 2009; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20601     

Microstructure Control of Sintered Porous Yttria-Stabilized Zirconia as a Durable Thermal Shielding Material

The microstructure of a thermal shielding material affects its thermal conductivity and mechanical property. In this study, the effects of the sintering temperature and the polymethyl methacrylate powder as a pore-former on the microstructure of a sintered porous yttria-stabilized zirconia (YSZ), which is used as a durable thermal shielding material, were investigated. It became clear that the microstructure of the sintered YSZ could be controlled by the particle size and the amount of the pore-former and the sintering temperature. The effect of the yttria amount in the YSZ on the microstructure was also clarified.     

Temperature dependence of birefringence and stress for natural rubber vulcanizates at strained state

The temperature dependence of stress and birefringence for natural rubber vulcanizates under medium and large deformation was measured for the processes of cooling, heating and re-cooling. In order to investigate the relation between the stress and crystal phase, the observed birefringence, Δt, was converted into the crystallinity, X_v, by the following equation:

$\text{X}{}_{\mathrm{<mtext>v</mtext>}}\text{=}\text{Δt?Δn}{}_{\mathrm{<mtext>a</mtext>}}\text{°f}{}_{\mathrm{<mtext>a</mtext>}}\text{Δn}{}_{\mathrm{<mtext>c</mtext>}}\text{°f}{}_{\mathrm{<mtext>c</mtext>}}\text{?Δn}{}_{\mathrm{<mtext>a</mtext>}}\text{°f}{}_{\mathrm{<mtext>a</mtext>}}$

where Δn⁰_c, Δn⁰_a, f_a and f_c are the intrinsic birefringence of the crystal, that of the amorphous phase, the orientation factor of crystallites, and that of amorphous phase, respectively. The fusion of crystallites induced by the thermal crystallization resulted in the increasing contractile force, while the fusion of strain-induced crystallites induced the reduction of contractile force.     

Novel method for producing amorphous rice flours by milling without adding water

The present study investigated a novel milling method for producing amorphous rice starch without adding water. A new type of milling machine was developed (termed the shear and heat milling machine (SHMM)), which is capable of applying mechanical shear and heat during the milling process. The SHMM consisted of a pair of rice mortars attached to a servomotor and a ring heater. The heater was installed on the upper mortar; the temperature of the upper mortar was monitored and controlled by a thermal controller. Wide‐angle X‐ray diffraction (WAXD) analysis was used to determine the crystallinities of starch in rice flour samples produced using the SHMM at different milling temperatures. The WAXD data for milled rice flour that had been heated exhibited no diffraction peaks. This experimental result demonstrates that the developed SHMM produces amorphous rice starch easily by milling with heating without the addition of water. The milling conditions such as the shear and heat applied can be used to control the crystallinity of starch in rice.     

Analysis of Transglucosylation Products of Aspergillus niger α-Glucosidase that Catalyzes the Formation of α-1,2- and α-1,3-Linked Oligosaccharides

According to whole-genome sequencing, Aspergillus niger produces multiple enzymes of glycoside hydrolases (GH) 31. Here we focus on a GH31 α-glucosidase, AgdB, from A. niger . AgdB has also previously been reported as being expressed in the yeast species, Pichia pastoris ; while the recombinant enzyme (rAgdB) has been shown to catalyze tranglycosylation via a complex mechanism. We constructed an expression system for A. niger AgdB using Aspergillus nidulans . To better elucidate the complicated mechanism employed by AgdB for transglucosylation, we also established a method to quantify glucosidic linkages in the transglucosylation products using 2D NMR spectroscopy. Results from the enzyme activity analysis indicated that the optimum temperature was 65 °C and optimum pH range was 6.0–7.0. Further, the NMR results showed that when maltose or maltopentaose served as the substrate, α-1,2-, α-1,3-, and small amount of α-1,1-β-linked oligosaccharides are present throughout the transglucosylation products of AgdB. These results suggest that AgdB is an α-glucosidase that serves as a transglucosylase capable of effectively producing oligosaccharides with α-1,2-, α-1,3-glucosidic linkages.     

Random-coiled conformation of polypeptide chains

Summary Random-coiled conformation of poly(L-leucine), which has -branched side-chain, was theoretically analyzed by a conformational energy calculation based on intra-residue interactions. Calculated characteristic ratio 7.62 was obtained by using the transformation matrix statistically averaged over the entire side-chain conformational space of L-Leu residue. This value is smaller than those of poly(L-phenylalanine) (11.24) and poly(L-tyrosine) (12.33) which have -branched side-chain.     

Application of the partial element equivalent circuit method to tower surge response calculations

This article presents calculations of tower surge responses and insulator voltages of an actual transmission tower including ground wires and phase wires. The partial element equivalent circuit (PEEC) method is applied as a simulation tool. Surge responses of the tower and insulator voltages calculated by the PEEC method are compared with electro magnetic transients program (EMTP) simulated results and experimental results collected from the literatures. The results calculated by the PEEC method agree well with the experimetal results, not only amplitudes but also waveshapes. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

A study of decoupling with skeleton matrix in two‐degree‐of‐freedom generalized minimum variance control

There are many multi‐input multi‐output (MIMO) systems in chemical plants, and they have multiple time delays of different length in each input and output pair. This paper explains a two‐degree‐of‐freedom (2DOF) control system based on generalized minimum variance control (GMVC) for MIMO systems. It can improve the tracking performance with respect to the reference signals and the response properties for the disturbance. The states between the sampling period can be expressed by using the modified z transform to take account of multiple time delays. Additionally, a tracking controller is designed to decouple the plant. © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 176(1): 28–36, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21046     

Refinement of inverter model considering dead‐time for performance improvement in predictive instantaneous current control

Model predictive instantaneous‐current control (MPIC), which was proposed in our earlier works, enables us to achieve better instantaneous current control using mathematical models of an inverter and permanent magnet synchronous motors (PMSMs). However, dead‐time to avoid short breakdown in the inverter is not usually considered in a general inverter model. Such an unmodeled part in the inverter model prevents accurate prediction of current evolution in motor systems based on the model predictive control. Therefore, in this paper, we analyze current response resulting from the dead‐time in the MPIC, and propose a refined inverter model considering the dead‐time so that control performance is improved. The effectiveness of the proposed method is verified through simulation and experiments. © 2013 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.