Prejudicial Narratives: Building Tomorrow's World Today

Film production requires world building: the power to visualise and bring to life narrative through a film's total environment. This is often entirely speculative, imagining alternative or future worlds. Here, Alex McDowell , acclaimed British production designer, producer and Professor at the University of Southern California (USC) describes his world-building, narrative approach to production design, which he consolidated in the Steven Spielberg film Minority Report (2002) that envisioned Washington DC in the year 2050. The possibilities of this storytelling technique are demonstrated by its transference into real-life projects, such as the immersive model that his production company, 5D GlobalStudio, developed for Al Baydha, a Bedouin village in Saudi Arabia.     

Cardanol grafted natural rubber: A green substitute to natural rubber for enhancing silica filler dispersion

Natural rubber (NR) usage is wide‐spread from pencil erasers to aero tyres. Carbon black and silica are the most common reinforcing fillers in the rubber industries. Carbon black enhances the mechanical properties, while silica reduces the rolling resistance and enhances the wet grip characteristics. However, the dispersion of polar silica fillers in the nonpolar hydrocarbon rubbers like natural rubber is a serious issue to be resolved. In recent years, cardanol, an agricultural by‐product of the cashew industry is already established as a multifunctional additive in the rubber. The present study focuses on dispersion of silica filler in natural rubber grafted with cardanol (CGNR) and determination of its technical properties. The optimum cure time reduces and the cure rate increases for the CGNR vulcanizates as compared to that of the NR vulcanizates at all loadings of silica varying from 30 to 60 phr. The interaction between the phenolic moiety of cardanol and the siloxane as well as silanol functional groups present on the silica surface enhances the rubber–filler interaction which leads to better reinforcement. The crosslink density and bound rubber content are found to be higher for the silica reinforced CGNR vulcanizates. The physico‐mechanical properties of the silica reinforced CGNR vulcanizates are superior to those of the NR vulcanizates. The CGNR vulcanizates show lower compression set and lower abrasion loss. The dynamic‐mechanical properties exhibit less Payne effect for silica reinforced CGNR vulcanizates as compared to the NR vulcanizates. The transmission electron photomicrographs show uniform dispersion of silica filler in the CGNR matrix. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43057.     

Synthesis and characterization of MC nylon/modified yttrium hydroxide nanocomposites

In this article, monomer casting (MC) nylon is synthesized. MC nylon could replace nonferrous metals in certain applications, including gears, wheels, and other moving parts. However, compared with metals, MC nylon products have poor strength and stiffness, and crack easily, especially at low temperatures. In addition, the dimensional stability of MC nylon is poor, especially in the large casting nylon products, causing significant internal stresses due to shrinkage. Thus, MC nylon cracks easily when cast and molded. The yttrium hydroxide particles are modified by stearic acid and dispersed in the caprolactam. The polymerization time is short due to fast anionic polymerization. Copolymerization with different ratios of yttrium hydroxide particles can be used to prepare the copolymer. The effects of different amounts of yttrium hydroxide on the performance of the monomer casting nylon are studied. The products are characterized using X‐ray diffraction, impact, and tensile testing. When the percentage of modified yttrium hydroxide is 0.3 wt %, the composite exhibits the maximum impact strength, thus the 0.3 wt % of modified yttrium hydroxide is the suitable percentage to enhance the impact strength of MC nylon. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43356.     

Fabrication and characterization of anodic oxide nanotubes on TiNb alloys

Titanium and its alloys have been extensively used as implant materials owing to their high specific strength, good biocompatibility and excellent corrosion resistance. Oxide nanotubular array layer can be formed on Ti alloy surface by electrochemical anodization treatment. In this work, the morphology of nanotubes formed on Ti–Nb alloys(Nb content of 5 wt%, 10 wt%, 20 wt%, 30 wt% and40 wt%) was investigated using an electrolyte containing ethylene glycol and NH_4 F. Oxide layers consisting of highly ordered nanotubes with a range of diameters(approximately40–55 nm for the inner diameter and 100–120 nm for the outer diameter) and lengths(approximately 10–20 lm) can be formed on alloys in the Ti–x Nb system, independent on the Nb content. The nanotubes formed on the Ti–Nb alloy surface were transformed from the anatase to rutile structure of titanium oxide. The oxide nanotubular surface is highly hydrophilic compared with the intact Ti Nb foil. The surface wettability varies with the nanotube diameter. As the nanotube diameter increases while the nanotube layer thickness remains constant, the capillary wetting of the nanotube surface decreases and the surface becomes less hydrophilic.Annealing changes the nanotubular surface wettability further and establishes less hydrophilic surface conditions due to the removal of hydroxyl groups and residue fluoridecontaining species. It is believed that the surface wettability is changed due to the decreasing content of hydroxyl groups in ambient atmosphere. This work can provide guidelines for improving structural and environmental conditions responsible for changing surface wettability of Ti Nb surfaces for biomedical applications.     

Serum lipid analysis and isotopic enrichment is suggestive of greater lipogenesis in young long-term cannabis users: A secondary analysis of a case–control study

Cannabis is now legal in many countries and while numerous studies have reported on its impact on cognition and appetite regulation, none have examined fatty acid metabolism in young cannabis users. We conducted an exploratory analysis to evaluate cannabis impact on fatty acid metabolism in cannabis users (n = 21) and non-cannabis users (n = 16). Serum levels of some saturated and monounsaturated fatty acids, including palmitic, palmitoleic, and oleic acids were higher in cannabis users compared to nonusers. As palmitic acid can be derived from diet or lipogenesis from sugars, we evaluated lipogenesis using a de novo lipogenesis index (palmitate/linoleic acid) and carbon-specific isotope analysis, which allows for the determination of fatty acid ¹³C signature. The significantly higher de novo lipogenesis index in the cannabis users group along with a more enriched ¹³C signature of palmitic acid suggested an increase in lipogenesis. In addition, while serum glucose concentration did not differ between groups, pyruvate and lactate were lower in the cannabis user group, with pyruvate negatively correlating with palmitic acid. Furthermore, the endocannabinoid 2-arachidonoylglycerol was elevated in cannabis users and could contribute to lipogenesis by activating the cannabinoid receptor 1. Because palmitic acid has been suggested to increase inflammation, we measured peripheral cytokines and observed no changes in inflammatory cytokines. Finally, an anti-inflammatory metabolite of palmitic acid, palmitoylethanolamide was elevated in cannabis users. Our results suggest that lipogenic activity is increased in cannabis users; however, future studies, including prospective studies that control dietary intake are required.     

Thermal Expansion of Alkaline‐Doped Lanthanum Ferrite Near the Néel Temperature

The thermal expansion and magnetic behaviors of divalent, alkaline‐doped lanthanum ferrites (La_0.9M_0.1FeO₃, M=Ca, Sr, Ba) were assessed using a combination of dilatometry, magnetometry, time‐of‐flight neutron diffraction, and high‐temperature X‐ray diffraction. Néel temperatures were determined through vibrating sample magnetometry and correlated well with changes in thermal expansion behavior observed during both dilatometry and X‐ray diffraction. The Néel temperatures observed for pure, Ca‐doped, Sr‐doped, and Ba‐doped lanthanum ferrites were 471°C, 351°C, 465°C, and 466°C, respectively. The effect of divalent substitutions on the magnetic behavior are attributed to charge compensation mechanisms and structural changes in the material.     

The formation and breakup of molten oxide jets under periodic excitation

The experiments on the capillary breakup of slag jets at high temperatures are presented in this article. The impact of external excitations on the disintegration process was investigated in a furnace with optical access filmed at frame rates up to 10,000 fps. A synthetic calcia‐alumina slag was used to form jets at different temperatures (1570–1660°C) and jet velocities (0.6–1.4 ms^?1). The impact of external vibration on the breakup was evident: for low jet velocities, the jet length decreased, the droplet size increased, satellite droplet formation was hindered, and a distinct “pumping mechanism” was observed. For jets with higher velocity, the jet length decreased by 30%, the droplet generation frequency increased from 20 to 250 droplets per second, the drop sizes were uniform, and satellite formation was also suppressed. In this case, the ideal case in which the volume of one wave instability forms one droplet was achieved. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3350–3361, 2014     

Crosslinking effect on polydimethylsiloxane elastic modulus measured by custom‐built compression instrument

A macroscopic compression test utilizing a simple custom‐built instrument was employed to measure polydimethylsiloxane (PDMS) elastic modulus. PDMS samples with varying crosslinking density were prepared with the elastomer base to the curing agent ratio ranging from 5 : 1 to 33 : 1. The PDMS network elastic modulus varied linearly with the amount of crosslinker, ranging from 0.57 MPa to 3.7 MPa for the samples tested. PDMS elastic modulus in MPa can be expressed as 20 MPa/PDMS base to curing agent ratio. This article describes a simple method for measuring elastic properties of soft polymeric materials. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41050.     

Impacts of Aerosol Aging on Laser Desorption/Ionization in Single-Particle Mass Spectrometers

Single-particle mass spectrometry (SPMS) has been widely used for characterizing the chemical mixing state of ambient aerosol particles. However, processes occurring during particle ablation and ionization can influence the mass spectra produced by these instruments. These effects remain poorly characterized for complex atmospheric particles. During the 2005 Study of Organic Aerosols in Riverside (SOAR), a thermodenuder was used to evaporate the more volatile aerosol species in sequential temperature steps up to 230°C; the residual aerosol particles were sampled by an aerosol mass spectrometer (AMS) and a single-particle aerosol time-of-flight mass spectrometer (ATOFMS). Removal of the secondary species (e.g., ammonium nitrate/sulfate) through heating permitted assessment of the change in ionization patterns as the composition changed for a given particle type. It was observed that a coating of secondary species can reduce the ionization efficiency by changing the degree of laser absorption or particle ablation, which significantly impacted the measured ion peak areas. Nonvolatile aerosol components were used as pseudo-internal standards (or “reference components”) to correct for this LDI effect. Such corrected ATOFMS ion peak areas correlated well with the AMS measurements of the same species up to 142°C. This work demonstrates the potential to accurately relate SPMS peak areas to the mass of specific aerosol components.

Copyright 2014 American Association for Aerosol Research