Thermal evaluation of vertical greenery systems for building walls

This research involves the study of 8 different vertical greenery systems (VGSs) installed in HortPark to evaluate the thermal impacts on the performance of buildings and their immediate environment based on the surface and ambient temperatures. VGSs 3 and 4 have the best cooling efficiency according to the maximum temperature reduction of the wall and substrate surfaces. These results point to the potential thermal benefits of vertical greenery systems in reducing the surface temperature of buildings facades in the tropical climate, leading to a reduction in the cooling load and energy cost. In terms of the lowest diurnal range of average wall surface temperature fluctuation, VGSs 4 and 1 show the highest capacities. No vertical greenery system performs well in term of the diurnal range of average substrate temperature fluctuation. By limiting the diurnal fluctuation of wall surface temperatures, the lifespan of building facades is prolonged, slowing down wear and tear as well as savings in maintenance cost and the replacement of façade parts. The effects of vertical greenery systems on ambient temperature are found to depend on specific vertical greenery systems. VGS 2 has hardly any effect on the ambient temperature while the effects of VGS 4 are felt as far as 0.60 m away. Given the preponderance of wall facades in the built environment, the use of vertical greenery systems to cool the ambient temperature in building canyons is promising. Furthermore, air intakes of air-conditioning at a cooler ambient temperature translate into saving in energy cooling load.     

Impact of heat load location and strength on air flow pattern with a passive chilled beam system

A passive chilled beam is a source of natural convection, creating a flow of cold air directly into the occupied zone. Experiments were conducted in a mock-up of an office room to study the air velocities in the occupied spaces. In addition, velocity profiles are registered when underneath heat loads exist and the cool and warm air flows interact. Experimental laboratory study revealed that in the case of the underneath heat gains, even no upward plume was generated and the dummy only acted as a flow obstacle, having a significant effect on the velocity profile. Furthermore, in an actual occupied office environment, the thermal plumes and the supply air diffuser mixed effectively the whole air volume. The maximum air velocity measured was still below 0.25 m/s with the extremely high heat gain of 164 W/m². The results demonstrate that analysis methods were the interaction of convection flow and jet are not taken into account could not accurately describe air movement and draught risk in the occupied room space.     

Prejudicial Narratives: Building Tomorrow's World Today

Film production requires world building: the power to visualise and bring to life narrative through a film's total environment. This is often entirely speculative, imagining alternative or future worlds. Here, Alex McDowell , acclaimed British production designer, producer and Professor at the University of Southern California (USC) describes his world-building, narrative approach to production design, which he consolidated in the Steven Spielberg film Minority Report (2002) that envisioned Washington DC in the year 2050. The possibilities of this storytelling technique are demonstrated by its transference into real-life projects, such as the immersive model that his production company, 5D GlobalStudio, developed for Al Baydha, a Bedouin village in Saudi Arabia.     

Fabrication and characterization of anodic oxide nanotubes on TiNb alloys

Titanium and its alloys have been extensively used as implant materials owing to their high specific strength, good biocompatibility and excellent corrosion resistance. Oxide nanotubular array layer can be formed on Ti alloy surface by electrochemical anodization treatment. In this work, the morphology of nanotubes formed on Ti–Nb alloys(Nb content of 5 wt%, 10 wt%, 20 wt%, 30 wt% and40 wt%) was investigated using an electrolyte containing ethylene glycol and NH_4 F. Oxide layers consisting of highly ordered nanotubes with a range of diameters(approximately40–55 nm for the inner diameter and 100–120 nm for the outer diameter) and lengths(approximately 10–20 lm) can be formed on alloys in the Ti–x Nb system, independent on the Nb content. The nanotubes formed on the Ti–Nb alloy surface were transformed from the anatase to rutile structure of titanium oxide. The oxide nanotubular surface is highly hydrophilic compared with the intact Ti Nb foil. The surface wettability varies with the nanotube diameter. As the nanotube diameter increases while the nanotube layer thickness remains constant, the capillary wetting of the nanotube surface decreases and the surface becomes less hydrophilic.Annealing changes the nanotubular surface wettability further and establishes less hydrophilic surface conditions due to the removal of hydroxyl groups and residue fluoridecontaining species. It is believed that the surface wettability is changed due to the decreasing content of hydroxyl groups in ambient atmosphere. This work can provide guidelines for improving structural and environmental conditions responsible for changing surface wettability of Ti Nb surfaces for biomedical applications.     

Thermal Expansion of Alkaline‐Doped Lanthanum Ferrite Near the Néel Temperature

The thermal expansion and magnetic behaviors of divalent, alkaline‐doped lanthanum ferrites (La_0.9M_0.1FeO₃, M=Ca, Sr, Ba) were assessed using a combination of dilatometry, magnetometry, time‐of‐flight neutron diffraction, and high‐temperature X‐ray diffraction. Néel temperatures were determined through vibrating sample magnetometry and correlated well with changes in thermal expansion behavior observed during both dilatometry and X‐ray diffraction. The Néel temperatures observed for pure, Ca‐doped, Sr‐doped, and Ba‐doped lanthanum ferrites were 471°C, 351°C, 465°C, and 466°C, respectively. The effect of divalent substitutions on the magnetic behavior are attributed to charge compensation mechanisms and structural changes in the material.     

Crosslinking effect on polydimethylsiloxane elastic modulus measured by custom‐built compression instrument

A macroscopic compression test utilizing a simple custom‐built instrument was employed to measure polydimethylsiloxane (PDMS) elastic modulus. PDMS samples with varying crosslinking density were prepared with the elastomer base to the curing agent ratio ranging from 5 : 1 to 33 : 1. The PDMS network elastic modulus varied linearly with the amount of crosslinker, ranging from 0.57 MPa to 3.7 MPa for the samples tested. PDMS elastic modulus in MPa can be expressed as 20 MPa/PDMS base to curing agent ratio. This article describes a simple method for measuring elastic properties of soft polymeric materials. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41050.