Fabrication and characterization of highly efficient three component CuBTC/graphene oxide/PSF membrane for gas separation application

Metal organic frameworks (MOFs) with marvelous properties have aroused enormous attention for different application especially gas adsorption and separation. In this regard, fabrication of MOF hybrids with carbon based materials is new strategy to upgrade MOF performance. In this study CuBTC (Copper benzene-1,3,5-tricarboxylic acid)/graphene oxide (GO) composite was synthesized and characterized by BET, SEM, TGA, XRD and FT-IR techniques. Then CuBTC and CuBTC/GO composite were incorporated into polysulfone (PSF) polymer to construct mixed matrix membranes (MMMs). The obtained membranes were characterized by SEM, TGA, XRD and tensile tests and their gas permeability was measured. The results were compared to those of CuBTC/PSF MMMs. It was revealed that CuBTC/GO composite as filler showed superior performance relative to CuBTC. For instance, 15 wt% loading of CuBTC/GO in PSF represented outstanding gas separation behavior while the same loading of CuBTC in PSF deteriorated performance of MMM. Well particle dispersion and favorable polymer-filler interaction were responsible for such observed difference. A high H₂/CH₄ and H₂/N₂ selectivity of 80.03 and 70.46 were recorded for CuBTC/GO in PSF (15 wt%) compared to 44.56 and 40.92 for CuBTC in PSF (15 wt%).     

Colour and ergonomics: On the selection of a “colour of the year”

The key role of colour in ergonomics has been emphasized by a number of researchers and design professionals. Although several research studies have been published regarding the use of colour in ergonomics, there are still some areas that need to be considered. The issue of deciding a “colour of the year” is an example, which represents a new challenge for researchers in the field of ergonomics. This is of particular interest considering the fact that the nature of research on the selection of a “colour of the year” is generally based on user experience. This paper argues that ergonomics should play a more prominent role in this field to ensure better user experience and performance. This paper highlights specific areas that need further study and development.     

On the dynamical thermoelasticity problem for a hollow funtionally graded cylinder

A thermoelasticity problem of a pressurized infinite cylinder made of functionally graded material is solved analytically where material properties vary with radial position. Time dependent thermal and mechanical boundary conditions are assumed to act on the inner and outer surfaces of the cylinder. For thermal boundary conditions, temperature is prescribed on both surfaces, whereas for mechanical boundary conditions, tractions are prescribed on the boundaries. Obtaining distribution of temperature throughout the cylinder, the dynamical structural problem is solved and closed form relations are extracted for distributions of stress components.     

Quantifying the effects of crack width,tortuosity, and roughness on water permeability of cracked mortars

The existing service-life prediction models rarely account for the effect of cracks on mass transport and durability of concrete. To correct this deficiency, transport in fractured porous media must be studied. The objective of this paper is to quantify the water permeability of localized cracks as a function of crack geometry (i.e., width, tortuosity, and surface roughness). Plain and fiber-reinforced mortar disk specimens were cracked by splitting tension; and the crack profile was digitized by image analysis and translated into crack geometric properties. Crack permeability was measured using a Darcian flow-thru cell. The results show that permeability is a function of crack width square. Crack tortuosity and roughness reduce the permeability by a factor of 4 to 6 below what is predicted by the theory for smooth parallel plate cracks. Although tortuosity and roughness exhibit fractal behavior, their proper measurement is possible and results in correct estimation of crack permeability.     

High temperature water gas shift reaction over Fe-Cr-Cu nanocatalyst fabricated by a novel method

Fe-Cr-Cu nanocatalyst was synthesized through an inorganic-precursor thermolysis approach and exploited for high temperature water gas shift reaction. The results demonstrated that the method used for the nanocatalyst fabrication led to smaller crystallite size (32.9 nm) and higher BET surface area (127.3 m²/g) compared to those of a reference sample (65.5 nm, 78.6 m²/g) prepared by co-precipitation conventional method. Furthermore, the obtained data for catalytic activity showed that the catalyst prepared via inorganic precursor has better activity than the reference sample in all studied temperatures (350-500 °C) and also exhibited higher catalytic activity than a commercial Fe-Cr-Cu catalyst in higher temperatures (more than 450 °C).     

C/SiC Gradient Oxidation Protective Coating on Graphite by Modified Reactive Melt Infiltration Method: Effects of Processing Parameters on Transition Interface Thickness and High-Temperature Anti-oxidation Behavior

Metallurgical and Materials Transactions A - In this research, it was found that the C/SiC transition interface thickness increases without a significant decrease in toughness by modifying the...     

CEDAR: Modeling impact of component error derating and read frequency on system-level vulnerability in high-performance processors

Reliability of the current microprocessor technology is seriously challenged by radiation-induced soft errors. Accurate Vulnerability Factor (VF) modeling of system components is crucial in designing cost-effective protection schemes in high-performance processors. Although Statistical Fault Injection (SFI) techniques can be used to provide relatively accurate VF estimations, they are often very time-consuming. Unlike SFI techniques, recently proposed analytical models can be used to compute VF in a timely fashion. However, VFs computed by such models are inaccurate as the system-level impact of soft errors is overlooked.     

Measurement of the amount and rate of methane dissolution in pure water and aqueous solution of SDS + multi-wall carbon nanotubes + β-cyclodextrin

In this paper, the impact of the mixture of sodium dodecyl sulfate (SDS) + multi-wall carbon nanotubes (MWCNTs) + β-cyclodextrin on the quantity and initial rate of methane dissolved in water is investigated. The experiments were performed at a temperature range of 278.15–303.15 K and an initial pressure of 0.5 MPa. The experimental results show that simultaneous utilization of β-cyclodextrin (0.01 mass fraction), MWCNTs (0.0005 mass fraction), and SDS (0.001 mass fraction) at 278.15 K increases the amount and the rate of methane dissolution in water by 29.90% and 173.78%, respectively, compared to pure water. An increase in the temperature decreases the quantity and the initial rate of methane dissolution in all solutions containing additives. However, no consistent relationship is observed between the temperature and the enhancement percentage of solubility of methane in solutions containing additives.