Relative brittleness characterization of some selected granitic building stones: Influence of mineral grain size

Being crystalline materials, brittleness may be an important issue for granitic rocks, especially when they are subject to certain loading conditions. Therefore, in practice, more specifically in their usage as a natural building stone, there is a need for their brittleness characterization. This paper reports a study carried out on some selected granitic rock types in order to determine their relative brittleness index values and relate it to their mineral grain size. For this purpose, three different types of granitic rocks similar in mineral composition, but diverse in grain sizes were selected for the execution of the study. The relative brittleness index values of the studied rock types were determined from the size effect method by using the point load test apparatus. Based on the results of this investigation it is was concluded that, rather than the proportions of the rock forming minerals such as quartz and feldspars, the grain size of feldspars could be the dominant parameter affecting relative brittleness values of the tested rocks.     

Effect of single and multi-channel electrodes application on EDM fast hole drilling performance

In diesel engines, it is inevitable that the torsional vibration is produced by the fluctuation of engine torque. Therefore, it is necessary to establish preventive measures to diminish the torsional vibration. A sleeve spring damper is one such measure to reduce the torsional vibration. In this study, the closed form equations to predict the spring constant of a sleeve spring and the dynamic characteristics of the torsional vibration damper are proposed to calculate stiffness of the damper, and verified their availability through the finite element analysis. Our theoretical values are in good agreement with results obtained from finite element analysis and experiments. Results obtained from the derived equation enable designers to be more efficient.     

Proximate composition and fatty acid profile of three different fresh and dried commercial sea cucumbers from Turkey

Proximate composition and fatty acid (FA) profile of three commercial sea cucumbers; Holothuria tubulosa, Holothuria polii and Holothuria mammata caught from Aegean Sea of Turkey were analysed. The effects of regional variation and drying process on FA composition were also investigated. Moisture, protein, fat and ash contents of the species ranged between 81.24% and 85.24%, 7.88% and 8.82%, 0.09% and 0.18%, and 5.13% and 7.85%, respectively, with a significant changes among species (P < 0.05) with some exceptions. Although FA values varied significantly (P < 0.05) among species and regions, the changes for most FA types representing the same region for different species were not significantly different. Total polyunsaturated fatty acids (PUFA) were found to be higher than total saturated (SFA) and monosaturated FAs (MUFA) accounting for 53.0–62.12% for ∑PUFA, 13.28–16.41% for ∑MUFA and 13.99–19.21% for ∑SFA. While some individual SFAs and PUFAs decreased after drying process, various individual FAs of MUFA increased in their amounts (P < 0.05). Among PUFAs, the highest mean value of eicosapentaenoic acid and docosahexaenoic acid for all regions were determined for H. polii as 7.25% and H. tubulosa as 12.37% in fresh samples, respectively. This study represents new information relating to FA contents and drying effect on FA profile for these species.     

Effect of curing under pressure on compressive strength development of cemented paste backfill

The mechanical performance of cemented paste backfill (CPB) placed in underground openings (e.g., mine stopes) often differs from laboratory-predicted performance, even under the same atmospheric curing conditions (ambient temperature and relative humidity). This is probably due to the specific self-weight consolidation, different drainage conditions and confinement pressures encountered in the paste backfilled stopes. A new test system named CUAPS (Curing Under Applied Pressure System) was designed at the Université du Québec en Abitibi-Témiscamingue (UQAT) to assess the hydro-mechanical performance of in situ CPB samples at laboratory scale. The CUAPS apparatus allows the effective curing of CPB samples subjected to an assortment of vertical pressure applications (curing under stresses) that can mimic in situ placement and consolidation conditions. The compressive strength development of CPB samples prepared from sulphide-rich mine tailings from Garpenberg polymetallic mine (Sweden) was investigated using CUAPS apparatus and conventional plastic moulds (unconsolidated undrained samples) in parallel. The effect of curing stress (i.e. simulating different consolidation conditions) on resultant geotechnical index parameters and hydromechanical properties of CPB samples was analyzed. The primary observation is the confirmation that the compressive strength development of the consolidated CPB samples is higher than that of unconsolidated undrained ones. It could be attributed to the removal of excess pore water mainly due to the applied pressure during the effective curing process, which seems to improve consolidation process of the CPB material. The results also account for the differences in the CPB strength observed between laboratory samples and in situ samples. Thus, CUAPS would be more suitable than conventional plastic moulds to collect data for preliminary and final design of CPB systems.     

Hemocompatibility,cytotoxicity, and genotoxicity of poly(methylmethacrylate)/nanohydroxyapatite nanocomposites synthesized by melt blending method

The aim of this study was to show the hemocompatibility, cytotoxicity, and genotoxicity of nanocomposites that were synthesized with different molecular weights of poly(methyl methacrylate) (PMMA) and different concentrations of nanohydroxyapatite (nHAp). Different techniques to characterize the nanocomposites were used. The cytotoxicity and genotoxic effects of the polymers and nanocomposites on human lymphocytes were determined by acid phosphatase assay, viability test, and comet assay. Moreover, hemocompatibility test was performed. It was found that all of the PMMA/nHAp nanocomposites are highly hemocompatible and biocompatible, none of the nanocomposites showed a cytotoxic effect, and nHAp addition decreased the genotoxicity.     

Recent advances in insulated gate bipolar transistor technology

Device design of the insulated gate bipolar transistor (IGBT) has been optimized to reduce the distributed transmission-line effect. In addition, cell geometry is chosen to yield high latchup current capability and low forward-voltage drop simultaneously. The vertical structure is optimized to enhance both the turn-off speed and the safe operating area of the IGBTs. The turn-off time of the n-IGBT has been shortened to be as low as 40 ns. The p-channel IGBT latchup current has been improved four to six times over the previously reported results through innovative design and processes. An open-base bipolar transistor model has been implemented to investigate transient IGBT characteristics     

Admission Control Algorithms for Revenue Optimization with QoS Guarantees in Mobile Wireless Networks

We propose and analyze call admission control algorithms integrated with pricing for revenue optimization with QoS guarantees to serve multiple service classes in mobile wireless networks. Traditional admission control algorithms make acceptance decisions for new and handoff calls to satisfy certain QoS constraints such as the dropping probability of handoff calls and the blocking probability of new calls being lower than a pre-specified threshold. We analyze a class of partitioning and threshold-based admission control algorithms that make acceptance/rejection decisions not only to satisfy QoS requirements but also to optimize the revenue of the system by taking prices and arrival/departure information of service calls into account. We show that for a “charge-by-time” pricing scheme, there exist optimal resource allocation settings under which the partitioning and threshold-based admission control algorithms would produce the maximum revenue obtainable by the system without sacrificing QoS requirements. Further, we develop a new hybrid admission control algorithm which outperforms both partitioning and threshold-based admission control algorithms over a wide range of input parameters characterizing the operating environment and service workload conditions. Methods for utilizing of the analysis results for realtime admission control for revenue optimization with QoS guarantees are described with numerical data given to demonstrate the applicability.     

Stereoscopic view-dependent visualization of terrain height fields

Visualization of large geometric environments has always been an important problem of computer graphics. We present a framework for the stereoscopic view-dependent visualization of large scale terrain models. We use a quadtree based multiresolution representation for the terrain data. This structure is queried to obtain the view-dependent approximations of the terrain model at different levels of detail. In order not to lose depth information, which is crucial for the stereoscopic visualization, we make use of a different simplification criterion, namely, distance-based angular error threshold. We also present an algorithm for the construction of stereo pairs in order to speed up the view-dependent stereoscopic visualization. The approach we use is the simultaneous generation of the triangles for two stereo images using a single draw-list so that the view frustum culling and vertex activation is done only once for each frame. The cracking problem is solved using the dependency information stored for each vertex. We eliminate the popping artifacts that can occur while switching between different resolutions of the data using morphing. We implemented the proposed algorithms on personal computers and graphics workstations. Performance experiments show that the second eye image can be produced approximately 45 percent faster than drawing the two images separately and a smooth stereoscopic visualization can be achieved at interactive frame rates using continuous multiresolution representation of height fields     

Optimization and surface charge sensitivity of high-voltageblocking structures with shallow junctions

The most commonly used high-voltage blocking and termination structures-floating field limiting rings (FLR), lateral charge control HVIC devices, and junction termination extension (JTE) structures-are very sensitive to positive silicon and silicon dioxide interface charges. These high-voltage termination structures specifically designed for 1000-V blocking capability lose 25 to 50% of their voltage-blocking capability under 5×10¹¹ cm^-2 net interface state density. In contrast, optimized multiple-zone JTE (MZ-JTE), and offset multiple field plated and field-limiting ring (OFP-FLR) structures will lose only 5% of their respective voltage blocking capabilities under the same surface-charge condition. These improved high-voltage blocking structures do not require additional passivation and process complexities