Vibratory densification of thermal insulation corundum products

Conclusions During vibratory densification, the bulk density and the angle of repose of the corundum bodies based on hollow granules and a porous filler depend on the type of the filler used and the size of its grains. The relative settling and the relative density of the bodies obtained after densification are related to their bulk density and the angle of repose.We established the dependence of the shrinkage during firing, the apparent density, and the strength of the fired products on the bulk density, the degree of settling, and the relative density of the specimens after vibratory densification. At a given density, the products based on the corundum granules exhibit higher strength.We developed large-sized corundum products of complex shape for thermal insulation at 1800°C under reducing conditions.Translated from Ogneupory, No. 4, pp. 28–32, April, 1986.     

Predicting N mineralized in a Georgia Coastal Plain field

The N mineralized from soil organic matter provides an important portion of N available for crop production. The objective of this study was to determine the amount of spatial variability in N mineralization potential in a field and to evaluate three different methods that might be used to estimate this variability. The three methods tested included predicting the N mineralized from surface soil properties as well as from a biological and a chemical procedure. Three soils varying in N mineralization potential were selected for the study from a field in the Georgia Coastal Plain. The N mineralized from these soils was determined by an N balance of unfertilized and cropped plots. The amount of N mineralized could not be reliably predicted from surface soil organic C, although surface soil clay concentration was positively correlated with the N mineralized. The N mineralized that was predicted using mineralization parameters determined by aerobic incubation, adjusted daily for soil water content and temperature, was approximately 50% of the field measurements of N mineralized. The values of NH₄-N extracted with hot 2 M KCl were related significantly to N mineralized in the field (r²= 0.60) and also to the zero order rate constant of mineralization, k₀ (r²= 0.77), determined from the N mineralized in the aerobic laboratory incubation.     

Biochemical activities during lipid accumulation inCandida curvata

Intracellular and extracellular concentrations of citrate and the specific activities of ten different enzymes in Candida curvata D were examined in relation to lipid biosynthesis in batch and continuous culture. Citrate was found to accumulate prior to lipid production and declined markedly as lipid accumulated in batch culture. The cells excreted citrate as the culture became nitrogen-limiting after 30 hr of growth, but little more was expelled after 40 hr when lipid accumulation was more marked. In continuous culture, only low levels of citrate were detected at the lower dilution rates and citrate was completely absent from both the cells and medium above a dilution rate of 0.1/hr. The activity of malic enzyme, malate dehydrogenase and ATP:citrate lyase increased in batch culture on lipid accumulated and, in continuous culture, both malic enzyme and ATP:citrate lyase varied in parallel with the specific rate of lipid synthesis which increased with increasing dilution rate. Activity of malate dehydrogenase, citrate synthase and glucose-6-phosphate dehydrogenase decreased with increasing dilution rate. The regulatory significance of these enzymes in lipid accumulation by C. curvata is discussed.     

Studies in Lithium Oxide Systems: XI, Li2O–B2O3–P2O5

The glassforming region in the system was roughly outlined and liquidus data were obtained for the three joins LiPO₃-BPO₄, Li₄P₂O₇-BPO₄, and Li₃PO₄-Li₂B₄O₇. Compatibility relations for the ternary subsystems Li₄P₂O₇-BPO₄-P₂O₅ and Li₂O-Li₃PO₄-Li₂B₈O₁₃ were established. Two ternary compounds with the probable compositions 22Li₂O - 11B₂O₃ - 13P₂O₅ and 2Li₂O 3B₂O₃ P₂O₅ were detected.     

Some electrical effects in an aluminum/propane/oxygen flame jet at atmospheric pressure

Three electrical effects in an approximately stoichiometric propane-oxygen flame seeded with aluminum powder were studied: a) increase in flame current caused by the addition of aluminum, b) effect of transverse electrical field on the rate of aluminum oxide deposition onto a solid surface, c) effect of the field on the rate of heat transfer to a flat plate immersed in the flame. The maximum field was limited by breakdown to about 450 v/cm. It appears that the oxide deposition rate and the heat transfer rate can be influenced by relatively small electric fields.     

Lipid products formed during desaturation of [1-14C] stearyl CoA by hen liver microsomes

A number of lipid products are formed during the desaturation of stearyl CoA by hen liver microsomes. This article presents an analysis of the products formed when [1-¹⁴C] stearyl CoA is incubated with hen liver microsomes for various time periods. [1-¹⁴C] Oleyl CoA was the first radioactive unsaturated product formed. Synthesis of phospholipids containing [1-¹⁴C] oleic acid occurs only after the desaturase activity has begun to decline. The specific radioactivity of [1-¹⁴C] oleyl CoA was similar to the specific radioactivity of [1-¹⁴C] stearyl CoA at all time periods tested. The specific radioactivities of [1-¹⁴C] oleic acid and phospholipids containing [1-¹⁴C] oleic acid were much lower than that of the [1-¹⁴C] stearyl CoA.     

Palmqvist Crack Extension and the Center-Loaded Penny Crack Analogy

Palmqvist crack extension in WC-Co can be described using the center-loaded penny crack analogy. When Palmqvist cracks are represented by semicircles of diameter l (l=crack length measured from an impression corner), the stress intensity factor which controls crack extension differs from that of a half-penny crack of radius l+a (2a = impression size) by only a slowly varying factor m=2^1/2 (l/a)^1/2; m≅1.0 to 2.4 for WC-Co and m≅0.8 to 1.4 for ceramics.     

Voidage characteristics and prediction of bed expansion in liquid-solid inverse fluidized bed

Studies on voidage fluctuations, axial voidage profile and bed expansion are carried out by measuring the local void fraction using particles of wide ranging characteristics in liquid-solid inverse fluidized bed. The quality of fluidization is elucidated by the local voidage fluctuations. The RMS voidage fluctuation depicts a maximum with respect to average bed void fraction and increases with increase in Archimedes number. The fluidization quality has been quantified using average normalized RMS voidage fluctuation in terms of Transition number. The axial void fraction is almost uniform throughout the bed except for particles with size distribution. All the literature and present experimental data on bed expansion are unified in terms of Richardson and Zaki equation using experimental terminal velocities. A new correlation is proposed for predicting the wall effect corrected experimental terminal velocities, as a substitute for standard drag equation. The bed expansion data are also predicted using the drift flux model.     

Fluor SOx净化工艺--为俄罗斯绿色环境开发的将SO2转化为元素硫的经济技术

Fluor公司开发的Fluor SO_2净化工艺具有广泛多样的工艺布局,可以通过经济的方式定制脱除烟气中的有害组成。该工艺几乎能去除全部SO_2并减少CO排放。Fluor SO_x净化工艺的主要步骤已在多套工业装置中得到成功的证实。除技术可行、经济合理之外,Fluor SO_x净化工艺不会产生任何有害副产物,也不会遇到与SO_3 有关的腐蚀问题。此外,该工艺生产高纯度可市售的元素硫。论述了Fluor SO_x净化工艺的特征、技术和成本优势、设计和操作的简易性以及实施的便利性。