Study of Ozonated Sunflower Oil Using 1H NMR and Microbiological Analysis

Prior studies have proven that ozonated vegetable oils present a high germicidal power. Ozonation of sunflower oil at different applied ozone dosage was carried out and peroxide and aldehydes indices along with antimicrobial activity were determined. The reaction products were identified using Proton Nuclear Magnetic Resonance Spectroscopy (¹H NMR). The principal signals intensity values were used for following the reaction course between ozone and sunflower oil. The reaction was following up to peroxide index values of 1202 mmol-equi/kg. The intensities of olefinic proton signals decreased with the gradual increase in ozone concentration but without disappearing completely. The Criegee ozonides obtained at 107.1 mg/g of ozone doses were approximately 3.9-fold higher than that at beginning of the reaction. The aldehyde protons were observed as a weak intensity signal in all the spectra. The signals belonging to olefinic protons from hydroperoxides appeared weak and increased with the increase in ozone doses. Signals from other oxygenated groups were assigned. The highest action spectrum of antimicrobial activity was obtained with the higher peroxide index. It was concluded that at higher applied ozone doses, the higher the antimicrobial activity potential of ozonized sunflower oil     

Electrodialytic extraction of Cu,Pb and Cl from municipal solid waste incineration fly ash suspended in water

The possibility of using fly ash from municipal solid waste incineration (MSWI) in, for example, concrete is considered. MSWI fly ash, however, has too high a concentration of heavy metals, which may cause leaching problems during use or problems with waste handling at the end of the lifetime of the concrete. The Cl content in MSWI fly ash is also too high and will cause corrosion problems in reinforced concrete. The possibility of removing some of the unwanted heavy metals (Cu and Pb) together with Cl from an MSWI fly ash suspended in water using an electrodialytic separation method was investigated. The removal of Pb and Cu was found to be highly pH dependent and the highest contents removed were 41 and 90%, respectively. The Cu concentration of the ash decreased from 2200 to 860 mg kg^?1 but the Pb concentration increased from 8560 to 16 800 mg kg^?1, showing that Pb is mainly found in the ash fraction that is least soluble. Hence electrodialytic treatment of the ash suspended in water is not a solution to improve the ash quality in terms of Pb. The water‐soluble Cl content per unit weight of the original ash was 12.4%. The removal of water‐soluble Cl was efficient and >98% of Cl was removed (calculated on the basis of mean initial and final concentrations). This result indicates that electrodialytic extraction may be a method that can be used for the removal of Cl from ash prior to its utilization in concrete. Copyright © 2006 Society of Chemical Industry     

Stereoisomers composition of 4-[(1′-methylpropyl)-oxycarbonyl]-2-oxetanone and related compounds,as precursors of fuctional polyesters,determined by chiral gas chromatography

Summary The configurational analysis of racemic and optically active stereoisomers of 4-[(1-methylpropyl)oxycarbonyl]-2-oxetanone has been carried out by using chiral gas chromatography. This technique has been successful in the stereoisomers composition determination of these -substituted -lactones prepared by two different routes and used as monomers in the preparation of malic acid stereocopolymers. Result are in good agreement with those obtained from high resolution ¹H NMR, in the presence of an Europium salt, as chiral shift reagent. This method has been extended to 3-methyl-4-[(1,2,2-trimethyl propyl)oxycarbonyl]-2-oxetanone. The exact knowledge of precursors configurational structure is very important in regard to the obtention of the corresponding polystereoisomers with a strictly controlled enantiomeric or diastereoisomeric composition and consequently with predictable properties.     

Ozone as an Alternative for Disinfection of Explants during In Vitro Mass Plant Propagation

Ozone was used as an alternative for replacing sodium hypochlorite in the disinfection of yam nodal segments during the establishment stage for in vitro mass plant propagation. The purpose of this work was to evaluate the effect of ozone on disinfection of yam nodal segments in gaseous and aqueous phase in comparison to sodium hypochlorite. The immersion of yam nodal segments in water containing dissolved ozone with an ozone concentration of 1.0, 1.5 and 2.0 ppm during for 5 to 10 min gave the best results; 100% of yam nodal segments were free of microbial contamination. In terms of sprouting initiation (7.5 days), sprouting percentage (88%), and sprouts growth (4.81 cm), all were improved in comparison to the conventionally used sodium hypochlorite.     

Altered Fatty Acid Metabolism-Related Gene Expression in Liver from Morbidly Obese Women with Non-Alcoholic Fatty Liver Disease

Lipid accumulation in the human liver seems to be a crucial mechanism in the pathogenesis and the progression of non-alcoholic fatty liver disease (NAFLD). We aimed to evaluate gene expression of different fatty acid (FA) metabolism-related genes in morbidly obese (MO) women with NAFLD. Liver expression of key genes related to de novo FA synthesis (LXRα, SREBP1c, ACC1, FAS), FA uptake and transport (PPARγ, CD36, FABP4), FA oxidation (PPARα), and inflammation (IL6, TNFα, CRP, PPARδ) were assessed by RT-qPCR in 127 MO women with normal liver histology (NL, n = 13), simple steatosis (SS, n = 47) and non-alcoholic steatohepatitis (NASH, n = 67). Liver FAS mRNA expression was significantly higher in MO NAFLD women with both SS and NASH compared to those with NL (p = 0.003, p = 0.010, respectively). Hepatic IL6 and TNFα mRNA expression was higher in NASH than in SS subjects (p = 0.033, p = 0.050, respectively). Interestingly, LXRα, ACC1 and FAS expression had an inverse relation with the grade of steatosis. These results were confirmed by western blot analysis. In conclusion, our results indicate that lipogenesis seems to be downregulated in advanced stages of SS, suggesting that, in this type of extreme obesity, the deregulation of the lipogenic pathway might be associated with the severity of steatosis.     

Analysis of polyolefin compositions through near infrared spectroscopy

In this work, NIRS is employed to provide compositions of α‐olefin copolymers, allowing for evaluation of the effects of certain key process variables on the final NIR spectral responses of obtained polymer materials. This work also introduces a new temperature programmed analytical technique, which combines NIRS measurements with partial fractionation of α‐olefin copolymers. The new proposed technique can be used for evaluation of polyolefin compositions, as presented here for poly(propene/1‐butene) copolymers. Besides, preliminary results obtained from thermal fractionation experiments indicate that this new proposed experimental technique can be employed for characterization of comonomer sequence distributions of α‐olefin copolymers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40127.     

Pullulan‐based films and coatings for food packaging: Present applications,emerging opportunities,and future challenges

Societal and industrial demands for lower environmental impact, cost effectiveness, and high‐performance goods and services are increasingly impacting the choice of technologies which are developed and deployed in consumer products. Like many other sectors, food packaging is moving to new technologies; the use of biopolymers is one of the most promising strategies toward an optimized use of traditional packaging materials (e.g., oil‐based plastics) without impairing the goal of extending shelf life. Among other food packaging materials, pullulan is attracting much attention due to its unique features. The goal of this review is to provide an overview of current and emerging applications of pullulan within the food packaging sector. In particular, the functional properties of interest for the food packaging industry will be discussed in light of the physicochemical attributes of this exopolysaccharide. Future challenges that may dictate the successful penetration of pullulan in the food packaging market are also outlined. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40539.     

Software for simulating dichromatic perception of video streams

We have designed a configurable stand‐alone Matlab‐based software to simulate dichromatic perception of video streams. The algorithm used is an extension for video streams of the “corresponding pair algorithm” by Capilla and coworkers for simulation of dichromatic perception of images. The software allows the user to upload a video sequence and to process it using different dichromatic color vision models and viewing conditions. The output video may be generated in different spatial and temporal resolutions and file formats. The functions for Matlab environment and a stand‐alone application may be downloaded from the Repository of the University of Alicante. © 2013 Wiley Periodicals, Inc. Col Res Appl, 39, 486–491, 2014     

Dispersive mixing efficiency of an elongational flow mixer on PP/EPDM blends: Morphological analysis and correlation with viscoelastic properties

Polypropylene and ethylene‐propylene‐diene terpolymer (PP/EPDM) blends were melt compounded in a new mixing device, designed in our laboratory under the trademark of RMX®, which predominantly generates elongational flows. Dispersion of the EPDM minor phase in PP was carried out in both RMX® and in an internal mixer (Haake Rheomix 600) at equivalent specific mixing energies and the resultant morphologies obtained by SEM were analyzed and compared. A better dispersive mixing efficiency of the RMX® mixer, i.e., lower D_n and D_v of the dispersed EPDM phase was observed. The impact of elongational flow was more pronounced for blends having a high viscosity ratio p, indicating an enhanced droplet break‐up mechanism, which was attributed to the combination of high shear rates inside the mixing element and important elongational flows in the convergent/divergent zones. The morphology of the blends was correlated with their linear viscoelastic properties by using the Palierne model. Very good agreement was found for the PP/EPDM 80/20 blends but for higher EPDM content, the Palierne model failed to describe the rheological behavior, which was attributed to percolation of the minor phase with increasing the concentration. Higher elasticity at low frequencies was observed for blends processed in the RMX®, which was attributed to a higher generated interfacial area. POLYM. ENG. SCI., 54:1444–1457, 2014. © 2013 Society of Plastics Engineers