High‐density polyethylene reinforced with submicron titania particles

Submicron titania particles were prepared by means of two different synthetic procedures in order to obtain different particle size (diameter ranging from 20 to 350 nm), shapes, and morphologies (amorphous or crystalline). Titania particles were surface modified with octadecylsilane in order to improve their compatibility with respect to polymeric matrices. High‐density polyethylene (HDPE)–titania composites were prepared by melt blending by using an internal mixer. The obtained composites were mechanically characterized in quasi static and creep tensile conditions. The presence of submicron titania particles (1 %vol) led to a significant increase of elastic modulus (20–25%) with respect to the unreinforced HDPE together with a slight increase of yield stress and a decrease of ultimate elongation. An interesting reduction for both elastic and viscoelastic creep compliance components was also evidenced. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

汽车涂料用铝颜料

介绍了水性汽车涂料用铝颜料的选择及处理技术,并提出了配方建议.     

LLDPE with Exclusively Ethyl Branches by Tandem Catalysis with Single-Site Zr(IV)/Co(II) Catalysts

Semicrystalline linear low density polyethylenes (LLDPEs) with exclusively ethyl branching (from 7 to 56 branches per 1,000 carbon atoms) were prepared from ethylene by homogeneous tandem catalytic systems comprising (imino)pyridine cobalt(II) dichlorides as oligomerization precursors, bis(cyclopentadienyl)zirconium(IV) dichloride as copolymerization precursor and methyaluminoxane as activator. The activity of the tandem systems was evaluated by varying either the molar fraction of the cobalt precursors or the ethylene pressure. The latter parameter was of crucial importance to control both the productivity and the extent of 1-butene incorporation. In particular, increasing the ethylene pressure from 2 bar to 4 bar changed the “comonomer effect” from positive to negative.     

All-conjugated block copolymers

All-conjugated block copolymers of the rod-rod type came into the focus of interest because of their unique and attractive combination of nanostructure formation and electronic activity. Potential applications in a next generation of organic polymer materials for photovoltaic devices ("bulk heterojunction"-type solar cells) or (bio)sensors have been proposed. Combining the fascinating self-assembly properties of block copolymers with the active electronic and/or optical function of conjugated polymers in all-conjugated block copolymers is, therefore, a very challenging goal of synthetic polymer chemistry. First examples of such all-conjugated block copolymers from a couple of research groups all over the world demonstrate possible synthetic approaches and the rich application potential in electronic devices. A crucial point in such a development of novel polymer materials is a rational control over their nanostructure formation. All-conjugated di- or triblock copolymers may allow for an organization of the copolymer materials into large-area ordered arrays with a length scale of nanostructure formation of the order of the exciton diffusion length of organic semiconductors (typically ca. 10 nm). Especially for amphiphilic, all-conjugated copolymers the formation of well-defined supramolecular structures (vesicles) has been observed. However, intense further research is necessary toward tailor-made, all-conjugated block copolymers for specific applications. The search for optimized block copolymer materials should consider the electronic as well as the morphological (self-assembly) properties.     

Electrocombustion of humic acid and removal of algae from aqueous solutions

This paper reports experiments involving the electrochemical combustion of humic acid (HA) and removal of algae from pond water. An electrochemical flow reactor with a boron-doped diamond film anode was used and constant current experiments were conducted in batch recirculation mode. The mass transfer characteristics of the electrochemical device were determined by voltammetric experiments in the potential region of water stability, followed by a controlled current experiment in the potential region of oxygen evolution. The average mass transfer coefficient was 5.2 × 10⁻⁵ m s⁻¹. The pond water was then processed to remove HA and algae in the conditions in which the reaction combustion occurred under mass transfer control. To this end, the mass transfer coefficient was used to estimate the initial limiting current density applied in the electrolytic experiments. As expected, all the parameters analyzed here—solution absorbance at 270 nm, total phenol concentration and total organic carbon concentration—decayed according to first-order kinetics. Since the diamond film anode successfully incinerated organic matter, the electrochemical system proved to be predictable and programmable.     

In situ FTIR spectroelectrochemistry of poly[2-(3-thienyl)ethyl acetate] and its hydrolyzed derivatives

Poly[2-(3-thienyl)ethyl acetate] (PTEtAc) was chemically synthesized and transformed to partially hydrolyzed PTEtAc (PTEtAcOH) and poly[2-(3-thienyl)ethanol] (PTEtOH). The influence of the acetoxy and hydroxyl terminal functionalities in the side groups on the electrochemical properties of these polyalkylthiophenes was studied by cyclic voltammetry and in situ FTIR spectroelectrochemistry. The cyclic voltammograms point to a chemically reversible behaviour of the p-doping process for PTEtAc and PTEtAcOH, while for PTEtOH the redox activity of the polymer film is lost during consecutive potential scans.The attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) was used to investigate the p-doping of the three different type of thiophene polymer films. In situ FTIR spectra taken at different electrode potentials in a cyclovoltammetric scan display the doping induced changes of the polymer pattern. Important differences in the behaviour of the polymers were observed and interpreted in terms of different film structures.     

Functionalization of Si(1 0 0) with ferrocene derivatives via “click” chemistry

We prepared ferrocene-modified silicon surfaces through a three-step procedure consisting of the photochemical anchoring of 11-bromo-1-undecene on H-Si(1 0 0), followed by treatment with NaN₃ and by a reaction with ethynylferrocene via azide-alkyne Huisgen cycloaddition reaction, also known as “click” chemistry. The advantages of this approach are multiple: the synthetic approach is flexible, provided a CC tethering arm is present on the molecule of interest; a self-assembled hydrocarbon chain can guarantee a good coverage and resistance to the further synthetic steps; the redox centers are located at the outer surface, where a good contact with the electrolyte becomes possible. We have monitored the progression of the reaction steps by XPS, and characterized the resulting new hybrid on Si by electrochemical methods. The presence and chemical nature of the redox species covalently attached to the SAM on Si has been evaluated by XPS, while the overall coverage has been calculated by CV measurements. A reversible electrochemical response has been evidenced for the hybrids and the progressive ageing followed at thousands of oxidation-reduction cycles.     

Nucleic acid amplification of individual molecules in a microfluidic device

A microfluidic device was developed that enabled rapid polymerase chain reaction (PCR) analysis of individual DNA molecules. The device combined a means for accessing samples serially from a microtiter plate, channels for assembling eight parallel PCR reactions, and integrated resistive heaters for rapid thermocycling (>5 degrees C/s heating, >7 degrees C/s cooling) of samples as they flowed continuously through PCR channels. Amplification was monitored by fluorescence detection of Taqman probes. The long, narrow channels (10 microm x 180 microm x 40 mm) allowed sufficient separation between neighboring DNA templates to enable amplification of discreet DNA molecules. The functionality of the device was demonstrated by reproducibly amplifying a 2D6.6 CYP450 template and distinguishing between wild-type and mutant sequences using Taqman probes. A comparison of the rate of individual amplification events to the expected Poisson distribution confirmed that the device could reliably analyze individual DNA molecules. This work establishes the feasibility of rapid, single-molecule interrogation of nucleic acids.     

Dynamic infrared study of polyphenylene sulfide using planar array infrared spectroscopy

Planar array infrared (PA-IR) spectroscopy was used to study polyphenylene sulfide (PPS) at room temperature during the application of a sinusoidal elastic deformation. All of the intensity in the dynamic spectra was contained within the in-phase spectrum, which was expected since the measurements were carried out at room temperature, far below the glass transition temperature. The contributions of chain orientation, sample thinning, and stress-induced band shifts were separated in the dynamic spectra. It was found that the effects of chain orientation and sample thinning canceled each other out. Stress-induced band shifts far below the spectral resolution, on the order of 0.01 cm(-1), were quantified and used to calculate the stress optical coefficients and mode Gruneisen parameters for PPS.